{"id":2125313212527,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Fairlady Z HZ33","handle":"hks-hipermax-iv-gt-coilovers-nissan-fairlady-z-hz33-80230-an010","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN010\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear different type. * Vehicle height data of Z33.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003chr\u003eRear different type. * Vehicle height data of Z33.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:55+08:00","created_at":"2019-02-08T13:06:55+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","fairlady-z-roadster-hz33-chuki-aft-fl-2005-2007-na-vq35hr-v6","fairlady-z-roadster-hz33-chuki-pre-fl-2004-2005-na-vq35hr-v6","fairlady-z-roadster-hz33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-roadster-hz33-zenki-2003-2004-na-vq35hr-v6","hks","hks30","nissan"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025496141935,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Fairlady Z HZ33","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8bee909a-9d46-4675-8a27-1cfb740c90a7.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8bee909a-9d46-4675-8a27-1cfb740c90a7.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Fairlady Z HZ33 - 80230-AN010 - RZCrewGarage","id":1850809286767,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8bee909a-9d46-4675-8a27-1cfb740c90a7.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8bee909a-9d46-4675-8a27-1cfb740c90a7.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN010\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear different type. * Vehicle height data of Z33.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003chr\u003eRear different type. * Vehicle height data of Z33.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003c!--split--\u003e\u003c!--split--\u003e"}
HKS - HIPERMAX IV GT Coilover Kit - Nissan Fairlady Z HZ33
Specifications:
Manufacturer: HKS
Part Number: 80230-AN010
Type: MAX IV GT
Ref: 80230-AN010
Front:
Dampening Adjustment: 30 Steps
Lowering: -12mm (Max Adjustment: 0 ~ -38
Spring Rate: 9kg
Rebound Setting: 128.5Nm
Compression Setting: 27.5Nm
Rear:
Dampening Adjustment: 30 Steps
Lowering: -15mm (Max Adjustment: 0 ~ -50
Spring Rate: F=88(9)/R=88(9)kg
Rebound Setting: 6.37Nm
Compression Setting: 1.67Nm
Remarks: Rear different type. * Vehicle height data of Z33.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.
Single Tube Damper Design
Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.
Dust Boot
Protect the shaft from the flying stones.
PNE Coating
Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.
M Shaft (?46 normal type)
With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.
Adopted Pillow Ball Upper Mount
For more accurate and sharp steering.
New Design Needle
Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.
Reduction of Unsprung Weight
In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)
30 Step Damping Force Adjustment
30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.
Manufacturer: HKS
Part Number: 80230-AN010
Type: MAX IV GT
Ref: 80230-AN010
Front:
Dampening Adjustment: 30 Steps
Lowering: -12mm (Max Adjustment: 0 ~ -38
Spring Rate: 9kg
Rebound Setting: 128.5Nm
Compression Setting: 27.5Nm
Rear:
Dampening Adjustment: 30 Steps
Lowering: -15mm (Max Adjustment: 0 ~ -50
Spring Rate: F=88(9)/R=88(9)kg
Rebound Setting: 6.37Nm
Compression Setting: 1.67Nm
Remarks: Rear different type. * Vehicle height data of Z33.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.
Single Tube Damper Design
Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.
Dust Boot
Protect the shaft from the flying stones.
PNE Coating
Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.
M Shaft (?46 normal type)
With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.
Adopted Pillow Ball Upper Mount
For more accurate and sharp steering.
New Design Needle
Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.
Reduction of Unsprung Weight
In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)
30 Step Damping Force Adjustment
30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.
Taxes:
TVA / IVA / VAT: All import taxes (TVA / IVA / VAT) are included in our pricing. No other taxes will be charged to you during delivery!
TVA / IVA / VAT: All import taxes (TVA / IVA / VAT) are included in our pricing. No other taxes will be charged to you during delivery!
Related Products
5zigen Pro Racer Headers - Nissan - Fairlady Z Z33
€1.696,80 €1.503,96
5zigen SP Spec Tune Exhaust system - Nissan - GT-R R35
€3.986,40 €3.695,40
ACL - Nissan RB25DET / DET NEO Race Main Bearing Set
€230,40 €218,40
ACL - Nissan RB25DETT/RB26DETT Race Rod Bearing Set
€146,40 €139,20
ACL - Nissan RB26DETT Race Main Bearing Set
€240,00 €228,00
ACL - Race Main Bearing Set For Nissan GTR VR38 complete set .25
€440,40 €418,80
ACL - Race Main Bearing Set For Nissan SR20DE, DET (Non GTIR)
€153,60 €146,40
ACL - Race Main Bearing Set For Nissan SR20DET (GTIR only)
€196,80 €187,20
ACL - Race Main Bearing Set For Nissan VG30DE/ VG30DET
€201,60 €192,00
ACL - Race Main Bearing Set For Nissan VQ35DE
€189,60 €180,00
ACL - Race Main Bearing Set Nissan CA18/CA20 Turbo and non turbo
€199,20 €189,60
ACL - Race Rod Bearing Pair For Nissan GTR VR38 (By Pair)
€151,20 €144,00