Skyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6

Sort by:
15% OFF
Cusco - 24mm Front Anti Roll Bar - Nissan Skyline GT-R BNR32 - 231 311 A
{"id":8190376870163,"title":"Cusco - 24mm Front Anti Roll Bar - Nissan Skyline GT-R BNR32","handle":"cusco-24mm-front-anti-roll-bar-nissan-skyline-gt-r-bnr32-231-311-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 311 A\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?24, 190% Compare To Standard *Standard ?20mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:52:24+08:00","created_at":"2023-03-20T14:52:25+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","anti-roll-bars","cusco-japan","cusco-japan30","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","steel","tva","ws126"],"price":46120,"price_min":46120,"price_max":46120,"available":true,"price_varies":false,"compare_at_price":54400,"compare_at_price_min":54400,"compare_at_price_max":54400,"compare_at_price_varies":false,"variants":[{"id":44654394278163,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 311 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 24mm Front Anti Roll Bar - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":46120,"weight":12000,"compare_at_price":54400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_3bd00730-848f-4138-8eac-209ac0ba2591.jpg?v=1679295145"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_3bd00730-848f-4138-8eac-209ac0ba2591.jpg?v=1679295145","options":["Title"],"media":[{"alt":"Cusco - 24mm Front Anti Roll Bar - Nissan Skyline GT-R BNR32 - 231 311 A","id":33392601137427,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_3bd00730-848f-4138-8eac-209ac0ba2591.jpg?v=1679295145"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_3bd00730-848f-4138-8eac-209ac0ba2591.jpg?v=1679295145","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 311 A\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?24, 190% Compare To Standard *Standard ?20mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - 24mm Front Anti Roll Bar - Nissan Skyline GT-R BNR32 - 231 311 A

Cusco - 24mm Front Anti Roll Bar - Nissan Skyline GT-R BNR32

€461,20

Specifications:Manufacturer: Cusco JapanPart Number: 231 311 ABar Type: Anti Roll BarPosition: FrontPoints: 2 PointsMaterial: SteelManufacturer Notes: ?24, 190% Compare To Standard *Standard ?20mm. Bushings Included.The Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.The Cusco anti-s...


More Info
16% OFF
Cusco - 30mm Rear Anti Roll Bar - Nissan Skyline GT-R BNR32 - 231 311 B
{"id":8190377001235,"title":"Cusco - 30mm Rear Anti Roll Bar - Nissan Skyline GT-R BNR32","handle":"cusco-30mm-rear-anti-roll-bar-nissan-skyline-gt-r-bnr32-231-311-b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 311 B\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?30 162% Compare To Standard *Standard ?25.4mm. Bushings And Bracket Included!\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:52:26+08:00","created_at":"2023-03-20T14:52:27+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","anti-roll-bars","cusco-japan","cusco-japan30","JP1","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","steel","tva","ws126"],"price":48770,"price_min":48770,"price_max":48770,"available":true,"price_varies":false,"compare_at_price":58100,"compare_at_price_min":58100,"compare_at_price_max":58100,"compare_at_price_varies":false,"variants":[{"id":44654396571923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 311 B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 30mm Rear Anti Roll Bar - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":48770,"weight":12000,"compare_at_price":58100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_rear_anti_roll_bar_671f1c6f-137c-4653-959e-9e6a2179b3c8.jpg?v=1679295147"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_rear_anti_roll_bar_671f1c6f-137c-4653-959e-9e6a2179b3c8.jpg?v=1679295147","options":["Title"],"media":[{"alt":"Cusco - 30mm Rear Anti Roll Bar - Nissan Skyline GT-R BNR32 - 231 311 B","id":33392601891091,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_rear_anti_roll_bar_671f1c6f-137c-4653-959e-9e6a2179b3c8.jpg?v=1679295147"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_rear_anti_roll_bar_671f1c6f-137c-4653-959e-9e6a2179b3c8.jpg?v=1679295147","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 311 B\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?30 162% Compare To Standard *Standard ?25.4mm. Bushings And Bracket Included!\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - 30mm Rear Anti Roll Bar - Nissan Skyline GT-R BNR32 - 231 311 B

Cusco - 30mm Rear Anti Roll Bar - Nissan Skyline GT-R BNR32

€487,70

Specifications:Manufacturer: Cusco JapanPart Number: 231 311 BBar Type: Anti Roll BarPosition: RearPoints: 2 PointsMaterial: SteelManufacturer Notes: ?30 162% Compare To Standard *Standard ?25.4mm. Bushings And Bracket Included!The Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.The ...


More Info
23% OFF
Cusco - Front BCS with Mounting Bracket for Type OS - Nissan Skyline GT-R BNR32 - 231 54B AL
{"id":8190360092947,"title":"Cusco - Front BCS with Mounting Bracket for Type OS - Nissan Skyline GT-R BNR32","handle":"cusco-front-bcs-with-mounting-bracket-for-type-os-nissan-skyline-gt-r-bnr32-231-54b-al","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 54B AL\u003cbr\u003eBar Type: BCS with Mounting Bracket for Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: \u003cbr\u003eMaterial: \u003cbr\u003e\u003cbr\u003eAll Brake Cylinder Stopper Bracket (BCS) are an add-on to Cusco strut bar. This bracket replaces one of the mount and includes a BCS. It help in stabilizing Brake pedal pressure and consistency during hard driving. This model fits Type OS Strut Bars and comes in the legendar Cusco Blue Colour for a perfect match with your existing bar look\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:21+08:00","created_at":"2023-03-20T14:46:22+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","cusco-japan","cusco-japan30","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-brake-cylinder-stopper","tva","ws125"],"price":7150,"price_min":7150,"price_max":7150,"available":true,"price_varies":false,"compare_at_price":9300,"compare_at_price_min":9300,"compare_at_price_max":9300,"compare_at_price_varies":false,"variants":[{"id":44654232699155,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 54B AL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front BCS with Mounting Bracket for Type OS - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":7150,"weight":1000,"compare_at_price":9300,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/BCS_Bracket_Type_OS_da9314d6-fd51-4ce4-8aa4-c603b9b48a46.jpg?v=1679294782"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/BCS_Bracket_Type_OS_da9314d6-fd51-4ce4-8aa4-c603b9b48a46.jpg?v=1679294782","options":["Title"],"media":[{"alt":"Cusco - Front BCS with Mounting Bracket for Type OS - Nissan Skyline GT-R BNR32 - 231 54B AL","id":33392542089491,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/BCS_Bracket_Type_OS_da9314d6-fd51-4ce4-8aa4-c603b9b48a46.jpg?v=1679294782"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/BCS_Bracket_Type_OS_da9314d6-fd51-4ce4-8aa4-c603b9b48a46.jpg?v=1679294782","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 54B AL\u003cbr\u003eBar Type: BCS with Mounting Bracket for Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: \u003cbr\u003eMaterial: \u003cbr\u003e\u003cbr\u003eAll Brake Cylinder Stopper Bracket (BCS) are an add-on to Cusco strut bar. This bracket replaces one of the mount and includes a BCS. It help in stabilizing Brake pedal pressure and consistency during hard driving. This model fits Type OS Strut Bars and comes in the legendar Cusco Blue Colour for a perfect match with your existing bar look\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Front BCS with Mounting Bracket for Type OS - Nissan Skyline GT-R BNR32 - 231 54B AL

Cusco - Front BCS with Mounting Bracket for Type OS - Nissan Skyline GT-R BNR32

€71,50

Specifications:Manufacturer: Cusco JapanPart Number: 231 54B ALBar Type: BCS with Mounting Bracket for Type OSPosition: FrontPoints: Material: All Brake Cylinder Stopper Bracket (BCS) are an add-on to Cusco strut bar. This bracket replaces one of the mount and includes a BCS. It help in stabilizing Brake pedal pressure and consistency during har...


More Info
12% OFF
Cusco - Front Strut brace Type 40D - Nissan Skyline GT-R BNR32 - 230 570 A
{"id":8190359863571,"title":"Cusco - Front Strut brace Type 40D - Nissan Skyline GT-R BNR32","handle":"cusco-front-strut-brace-type-40d-nissan-skyline-gt-r-bnr32-230-570-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 230 570 A\u003cbr\u003eBar Type: Strut brace Type 40D\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Type-40D Strut Bar is a 40mm D-Shaped lightweight aluminum bar designed to provide clearance inside the engine bay.\u003cbr\u003eThe 40mm non-circular diameter provides great rigidity, able to withstand the harshest of chassis flex.\n\u003cbr\u003e\nThe steel end plate brackets painted in titanium gray color provide flawless fitment per vehicle application.\u003cbr\u003eThree center bar types are available, specifically set per application.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:14+08:00","created_at":"2023-03-20T14:46:15+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","aluminium","cusco-japan","cusco-japan30","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-bars","tva","ws126"],"price":29960,"price_min":29960,"price_max":29960,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":44654232437011,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"230 570 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type 40D - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":29960,"weight":9000,"compare_at_price":34100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_type_40d_3_4f59a2fa-bfaf-4ada-aac7-425db619c6ed.jpg?v=1679294775"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_type_40d_3_4f59a2fa-bfaf-4ada-aac7-425db619c6ed.jpg?v=1679294775","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type 40D - Nissan Skyline GT-R BNR32 - 230 570 A","id":33392541466899,"position":1,"preview_image":{"aspect_ratio":4.993,"height":142,"width":709,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_type_40d_3_4f59a2fa-bfaf-4ada-aac7-425db619c6ed.jpg?v=1679294775"},"aspect_ratio":4.993,"height":142,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_type_40d_3_4f59a2fa-bfaf-4ada-aac7-425db619c6ed.jpg?v=1679294775","width":709}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 230 570 A\u003cbr\u003eBar Type: Strut brace Type 40D\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Type-40D Strut Bar is a 40mm D-Shaped lightweight aluminum bar designed to provide clearance inside the engine bay.\u003cbr\u003eThe 40mm non-circular diameter provides great rigidity, able to withstand the harshest of chassis flex.\n\u003cbr\u003e\nThe steel end plate brackets painted in titanium gray color provide flawless fitment per vehicle application.\u003cbr\u003eThree center bar types are available, specifically set per application.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Front Strut brace Type 40D - Nissan Skyline GT-R BNR32 - 230 570 A

Cusco - Front Strut brace Type 40D - Nissan Skyline GT-R BNR32

€299,60

Specifications:Manufacturer: Cusco JapanPart Number: 230 570 ABar Type: Strut brace Type 40DPosition: FrontPoints: 2 PointsMaterial: AluminiumThe Cusco Type-40D Strut Bar is a 40mm D-Shaped lightweight aluminum bar designed to provide clearance inside the engine bay.The 40mm non-circular diameter provides great rigidity, able to withstand the ha...


More Info
13% OFF
Cusco - Front Strut brace Type ALC OS - Nissan Skyline GT-R BNR32 - 231 535 A
{"id":8190359568659,"title":"Cusco - Front Strut brace Type ALC OS - Nissan Skyline GT-R BNR32","handle":"cusco-front-strut-brace-type-alc-os-nissan-skyline-gt-r-bnr32-231-535-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 535 A\u003cbr\u003eBar Type: Strut brace Type ALC OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type-OS Aluminum Carbon\u003cbr\u003e\u003cbr\u003eCenter Bar: Made from aluminum and real carbon fiber wrap. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The end plate brackets provide flawless fitment per vehicle application and is finished in titanium gray coloring.\u003cbr\u003ePlates: Titanium gray color. To highlight the carbon fiber, the plates are finished in titanium gray, giving you the sporty or race look in your engine bay or trunk.\u003cbr\u003eTypes: Two center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:05+08:00","created_at":"2023-03-20T14:46:06+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","aluminium","carbon","cusco-japan","cusco-japan30","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-bars","tva","ws126"],"price":32600,"price_min":32600,"price_max":32600,"available":true,"price_varies":false,"compare_at_price":37900,"compare_at_price_min":37900,"compare_at_price_max":37900,"compare_at_price_varies":false,"variants":[{"id":44654232142099,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 535 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type ALC OS - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":32600,"weight":9000,"compare_at_price":37900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Type_ALC_OS_c3d88641-9900-4ee6-90a5-5cd4b5cef745.jpg?v=1679294766"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Type_ALC_OS_c3d88641-9900-4ee6-90a5-5cd4b5cef745.jpg?v=1679294766","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type ALC OS - Nissan Skyline GT-R BNR32 - 231 535 A","id":33392540254483,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Type_ALC_OS_c3d88641-9900-4ee6-90a5-5cd4b5cef745.jpg?v=1679294766"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Type_ALC_OS_c3d88641-9900-4ee6-90a5-5cd4b5cef745.jpg?v=1679294766","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 535 A\u003cbr\u003eBar Type: Strut brace Type ALC OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type-OS Aluminum Carbon\u003cbr\u003e\u003cbr\u003eCenter Bar: Made from aluminum and real carbon fiber wrap. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The end plate brackets provide flawless fitment per vehicle application and is finished in titanium gray coloring.\u003cbr\u003ePlates: Titanium gray color. To highlight the carbon fiber, the plates are finished in titanium gray, giving you the sporty or race look in your engine bay or trunk.\u003cbr\u003eTypes: Two center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Front Strut brace Type ALC OS - Nissan Skyline GT-R BNR32 - 231 535 A

Cusco - Front Strut brace Type ALC OS - Nissan Skyline GT-R BNR32

€326,00

Specifications:Manufacturer: Cusco JapanPart Number: 231 535 ABar Type: Strut brace Type ALC OSPosition: FrontPoints: 2 PointsMaterial: Carbon,AluminiumCusco Strut Tower Bars Type-OS Aluminum CarbonCenter Bar: Made from aluminum and real carbon fiber wrap. The inside of the piping is designed for the perfect balance between light weight characte...


More Info
10% OFF
Cusco - Front Strut brace Type AS - Nissan Skyline GT-R BNR32 - 230 510 A
{"id":8190359798035,"title":"Cusco - Front Strut brace Type AS - Nissan Skyline GT-R BNR32","handle":"cusco-front-strut-brace-type-as-nissan-skyline-gt-r-bnr32-230-510-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 230 510 A\u003cbr\u003eBar Type: Strut brace Type AS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity.\u003cbr\u003e\nThe steel end plate brakets are painted in the trademarked Cusco blue provide flawless fitment.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:11+08:00","created_at":"2023-03-20T14:46:12+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","aluminium","cusco-japan","cusco-japan30","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-bars","tva","ws126"],"price":27310,"price_min":27310,"price_max":27310,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":44654232371475,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"230 510 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type AS - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":27310,"weight":9000,"compare_at_price":30400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_72c0fc48-8492-41b9-84ac-c9b4dda9f344.jpg?v=1679294772"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_72c0fc48-8492-41b9-84ac-c9b4dda9f344.jpg?v=1679294772","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type AS - Nissan Skyline GT-R BNR32 - 230 510 A","id":33392541270291,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_72c0fc48-8492-41b9-84ac-c9b4dda9f344.jpg?v=1679294772"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_72c0fc48-8492-41b9-84ac-c9b4dda9f344.jpg?v=1679294772","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 230 510 A\u003cbr\u003eBar Type: Strut brace Type AS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity.\u003cbr\u003e\nThe steel end plate brakets are painted in the trademarked Cusco blue provide flawless fitment.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Front Strut brace Type AS - Nissan Skyline GT-R BNR32 - 230 510 A

Cusco - Front Strut brace Type AS - Nissan Skyline GT-R BNR32

€273,10

Specifications:Manufacturer: Cusco JapanPart Number: 230 510 ABar Type: Strut brace Type ASPosition: FrontPoints: 2 PointsMaterial: AluminiumThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity. The steel end plate brakets are painted in the trademarked Cusco b...


More Info
12% OFF
Cusco - Front Strut brace Type OS - Nissan Skyline GT-R BNR32 - 231 540 A
{"id":8190359601427,"title":"Cusco - Front Strut brace Type OS - Nissan Skyline GT-R BNR32","handle":"cusco-front-strut-brace-type-os-nissan-skyline-gt-r-bnr32-231-540-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 540 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:07+08:00","created_at":"2023-03-20T14:46:07+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","aluminium","cusco-japan","cusco-japan30","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-bars","tva","ws126"],"price":29960,"price_min":29960,"price_max":29960,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":44654232174867,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 540 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type OS - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":29960,"weight":9000,"compare_at_price":34100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_45b54bc3-54f9-49b3-9ce4-c1b3f18a988d.jpg?v=1679294768"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_45b54bc3-54f9-49b3-9ce4-c1b3f18a988d.jpg?v=1679294768","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type OS - Nissan Skyline GT-R BNR32 - 231 540 A","id":33392540287251,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_45b54bc3-54f9-49b3-9ce4-c1b3f18a988d.jpg?v=1679294768"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_45b54bc3-54f9-49b3-9ce4-c1b3f18a988d.jpg?v=1679294768","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 540 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Front Strut brace Type OS - Nissan Skyline GT-R BNR32 - 231 540 A

Cusco - Front Strut brace Type OS - Nissan Skyline GT-R BNR32

€299,60

Specifications:Manufacturer: Cusco JapanPart Number: 231 540 ABar Type: Strut brace Type OSPosition: FrontPoints: 2 PointsMaterial: AluminiumCusco Strut Tower Bars Type OS, Oval Shaft designCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect bala...


More Info
15% OFF
Cusco - Front Strut brace Type OS with BCS (RHD only) - Nissan Skyline GT-R BNR32 - 231 540 AM
{"id":8190359666963,"title":"Cusco - Front Strut brace Type OS with BCS (RHD only) - Nissan Skyline GT-R BNR32","handle":"cusco-front-strut-brace-type-os-with-bcs-rhd-only-nissan-skyline-gt-r-bnr32-231-540-am","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 540 AM\u003cbr\u003eBar Type: Strut brace Type OS with BCS (RHD only)\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application. This bar Includes a Brake Cylinder stopper helping in stabilizing braking power during spirited driving.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:08+08:00","created_at":"2023-03-20T14:46:09+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","aluminium","cusco-japan","cusco-japan30","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-bars","tva","ws126"],"price":34370,"price_min":34370,"price_max":34370,"available":true,"price_varies":false,"compare_at_price":40500,"compare_at_price_min":40500,"compare_at_price_max":40500,"compare_at_price_varies":false,"variants":[{"id":44654232240403,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 540 AM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type OS with BCS (RHD only) - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":34370,"weight":9000,"compare_at_price":40500,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_BCS_af7d91fb-702c-4d95-ace6-a8ad64bef378.jpg?v=1679294769"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_BCS_af7d91fb-702c-4d95-ace6-a8ad64bef378.jpg?v=1679294769","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type OS with BCS (RHD only) - Nissan Skyline GT-R BNR32 - 231 540 AM","id":33392540680467,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_BCS_af7d91fb-702c-4d95-ace6-a8ad64bef378.jpg?v=1679294769"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_BCS_af7d91fb-702c-4d95-ace6-a8ad64bef378.jpg?v=1679294769","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 540 AM\u003cbr\u003eBar Type: Strut brace Type OS with BCS (RHD only)\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application. This bar Includes a Brake Cylinder stopper helping in stabilizing braking power during spirited driving.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Front Strut brace Type OS with BCS (RHD only) - Nissan Skyline GT-R BNR32 - 231 540 AM

Cusco - Front Strut brace Type OS with BCS (RHD only) - Nissan Skyline GT-R BNR32

€343,70

Specifications:Manufacturer: Cusco JapanPart Number: 231 540 AMBar Type: Strut brace Type OS with BCS (RHD only)Position: FrontPoints: 2 PointsMaterial: AluminiumCusco Strut Tower Bars Type OS, Oval Shaft designCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed...


More Info
13% OFF
Cusco - Rear Strut brace Type 40 - Nissan Skyline GT-R BNR32 - 230 526 AN
{"id":8190360060179,"title":"Cusco - Rear Strut brace Type 40 - Nissan Skyline GT-R BNR32","handle":"cusco-rear-strut-brace-type-40-nissan-skyline-gt-r-bnr32-230-526-an","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 230 526 AN\u003cbr\u003eBar Type: Strut brace Type 40\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Brace Type-40 is a 40mm Aluminum strut bar made from lightweight aluminum. The piping diameter provides great rigidity, able to withstand the harshest of chassis flex.\u003cbr\u003e\nThe aluminum end plate brakets painted in titanium gray color provide flawless fitment per vehicle application.\u003cbr\u003e\nThree center bar types are available, specifically set per application.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:19+08:00","created_at":"2023-03-20T14:46:20+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","aluminium","cusco-japan","cusco-japan30","JP1","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-bars","tva","ws126"],"price":32600,"price_min":32600,"price_max":32600,"available":true,"price_varies":false,"compare_at_price":37900,"compare_at_price_min":37900,"compare_at_price_max":37900,"compare_at_price_varies":false,"variants":[{"id":44654232666387,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"230 526 AN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Rear Strut brace Type 40 - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":32600,"weight":9000,"compare_at_price":37900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_40_3_077d38ca-53d1-4c7b-ac3a-f3235ec53acd.jpg?v=1679294780"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_40_3_077d38ca-53d1-4c7b-ac3a-f3235ec53acd.jpg?v=1679294780","options":["Title"],"media":[{"alt":"Cusco - Rear Strut brace Type 40 - Nissan Skyline GT-R BNR32 - 230 526 AN","id":33392542056723,"position":1,"preview_image":{"aspect_ratio":4.993,"height":142,"width":709,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_40_3_077d38ca-53d1-4c7b-ac3a-f3235ec53acd.jpg?v=1679294780"},"aspect_ratio":4.993,"height":142,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_40_3_077d38ca-53d1-4c7b-ac3a-f3235ec53acd.jpg?v=1679294780","width":709}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 230 526 AN\u003cbr\u003eBar Type: Strut brace Type 40\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Brace Type-40 is a 40mm Aluminum strut bar made from lightweight aluminum. The piping diameter provides great rigidity, able to withstand the harshest of chassis flex.\u003cbr\u003e\nThe aluminum end plate brakets painted in titanium gray color provide flawless fitment per vehicle application.\u003cbr\u003e\nThree center bar types are available, specifically set per application.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Rear Strut brace Type 40 - Nissan Skyline GT-R BNR32 - 230 526 AN

Cusco - Rear Strut brace Type 40 - Nissan Skyline GT-R BNR32

€326,00

Specifications:Manufacturer: Cusco JapanPart Number: 230 526 ANBar Type: Strut brace Type 40Position: RearPoints: 2 PointsMaterial: AluminiumCusco Strut Brace Type-40 is a 40mm Aluminum strut bar made from lightweight aluminum. The piping diameter provides great rigidity, able to withstand the harshest of chassis flex. The aluminum end plate bra...


More Info
10% OFF
Cusco - Rear Strut brace Type AS - Nissan Skyline GT-R BNR32 - 230 511 AN
{"id":8190359830803,"title":"Cusco - Rear Strut brace Type AS - Nissan Skyline GT-R BNR32","handle":"cusco-rear-strut-brace-type-as-nissan-skyline-gt-r-bnr32-230-511-an","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 230 511 AN\u003cbr\u003eBar Type: Strut brace Type AS\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity.\u003cbr\u003e\nThe steel end plate brakets are painted in the trademarked Cusco blue provide flawless fitment.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:13+08:00","created_at":"2023-03-20T14:46:14+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","aluminium","cusco-japan","cusco-japan30","JP1","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-bars","tva","ws126"],"price":27310,"price_min":27310,"price_max":27310,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":44654232404243,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"230 511 AN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Rear Strut brace Type AS - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":27310,"weight":9000,"compare_at_price":30400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_f5d6fc05-8777-428e-a81c-f2817bb37598.jpg?v=1679294774"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_f5d6fc05-8777-428e-a81c-f2817bb37598.jpg?v=1679294774","options":["Title"],"media":[{"alt":"Cusco - Rear Strut brace Type AS - Nissan Skyline GT-R BNR32 - 230 511 AN","id":33392541303059,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_f5d6fc05-8777-428e-a81c-f2817bb37598.jpg?v=1679294774"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_f5d6fc05-8777-428e-a81c-f2817bb37598.jpg?v=1679294774","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 230 511 AN\u003cbr\u003eBar Type: Strut brace Type AS\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity.\u003cbr\u003e\nThe steel end plate brakets are painted in the trademarked Cusco blue provide flawless fitment.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Rear Strut brace Type AS - Nissan Skyline GT-R BNR32 - 230 511 AN

Cusco - Rear Strut brace Type AS - Nissan Skyline GT-R BNR32

€273,10

Specifications:Manufacturer: Cusco JapanPart Number: 230 511 ANBar Type: Strut brace Type ASPosition: RearPoints: 2 PointsMaterial: AluminiumThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity. The steel end plate brakets are painted in the trademarked Cusco b...


More Info
15% OFF
Cusco - Rear Strut brace Type CB - Nissan Skyline GT-R BNR32 - 231 551 AN
{"id":8190360027411,"title":"Cusco - Rear Strut brace Type CB - Nissan Skyline GT-R BNR32","handle":"cusco-rear-strut-brace-type-cb-nissan-skyline-gt-r-bnr32-231-551-an","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 551 AN\u003cbr\u003eBar Type: Strut brace Type CB\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Strut Brace Type CB is a super strong and rigid strut brace comprising of a 40mm carbon fibre pipe. Brackets are made in titanium or aluminium and coated in titanium colour. High precision maching allows a precise fit for parts made in titanium and aluminium.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:17+08:00","created_at":"2023-03-20T14:46:18+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","aluminium","carbon","cusco-japan","cusco-japan30","JP1","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-bars","tva","ws126"],"price":36130,"price_min":36130,"price_max":36130,"available":true,"price_varies":false,"compare_at_price":43000,"compare_at_price_min":43000,"compare_at_price_max":43000,"compare_at_price_varies":false,"variants":[{"id":44654232633619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 551 AN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Rear Strut brace Type CB - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":36130,"weight":9000,"compare_at_price":43000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_CB_030b928b-af95-43f9-9955-cba6635a169d.jpg?v=1679294779"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_CB_030b928b-af95-43f9-9955-cba6635a169d.jpg?v=1679294779","options":["Title"],"media":[{"alt":"Cusco - Rear Strut brace Type CB - Nissan Skyline GT-R BNR32 - 231 551 AN","id":33392542023955,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_CB_030b928b-af95-43f9-9955-cba6635a169d.jpg?v=1679294779"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_CB_030b928b-af95-43f9-9955-cba6635a169d.jpg?v=1679294779","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 551 AN\u003cbr\u003eBar Type: Strut brace Type CB\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Strut Brace Type CB is a super strong and rigid strut brace comprising of a 40mm carbon fibre pipe. Brackets are made in titanium or aluminium and coated in titanium colour. High precision maching allows a precise fit for parts made in titanium and aluminium.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Rear Strut brace Type CB - Nissan Skyline GT-R BNR32 - 231 551 AN

Cusco - Rear Strut brace Type CB - Nissan Skyline GT-R BNR32

€361,30

Specifications:Manufacturer: Cusco JapanPart Number: 231 551 ANBar Type: Strut brace Type CBPosition: RearPoints: 2 PointsMaterial: Carbon,AluminiumThe Cusco Strut Brace Type CB is a super strong and rigid strut brace comprising of a 40mm carbon fibre pipe. Brackets are made in titanium or aluminium and coated in titanium colour. High precision ...


More Info
12% OFF
Cusco - Rear Strut brace Type OS - Nissan Skyline GT-R BNR32 - 231 541 AN
{"id":8190359732499,"title":"Cusco - Rear Strut brace Type OS - Nissan Skyline GT-R BNR32","handle":"cusco-rear-strut-brace-type-os-nissan-skyline-gt-r-bnr32-231-541-an","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 541 AN\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:10+08:00","created_at":"2023-03-20T14:46:11+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","2-points","aluminium","cusco-japan","cusco-japan30","JP1","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-bars","tva","ws126"],"price":29960,"price_min":29960,"price_max":29960,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":44654232305939,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 541 AN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Rear Strut brace Type OS - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":29960,"weight":9000,"compare_at_price":34100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_5c1ce69a-d711-4512-9447-f96e84c7b978.jpg?v=1679294771"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_5c1ce69a-d711-4512-9447-f96e84c7b978.jpg?v=1679294771","options":["Title"],"media":[{"alt":"Cusco - Rear Strut brace Type OS - Nissan Skyline GT-R BNR32 - 231 541 AN","id":33392541073683,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_5c1ce69a-d711-4512-9447-f96e84c7b978.jpg?v=1679294771"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_5c1ce69a-d711-4512-9447-f96e84c7b978.jpg?v=1679294771","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 541 AN\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Rear Strut brace Type OS - Nissan Skyline GT-R BNR32 - 231 541 AN

Cusco - Rear Strut brace Type OS - Nissan Skyline GT-R BNR32

€299,60

Specifications:Manufacturer: Cusco JapanPart Number: 231 541 ANBar Type: Strut brace Type OSPosition: RearPoints: 2 PointsMaterial: AluminiumCusco Strut Tower Bars Type OS, Oval Shaft designCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect bala...


More Info
20% OFF
Cusco - Rear Strut brace Type OS-T - Nissan Skyline GT-R BNR32 - 230 544 A
{"id":8190359929107,"title":"Cusco - Rear Strut brace Type OS-T - Nissan Skyline GT-R BNR32","handle":"cusco-rear-strut-brace-type-os-t-nissan-skyline-gt-r-bnr32-230-544-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 230 544 A\u003cbr\u003eBar Type: Strut brace Type OS-T\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 3 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Strut Brace Type OS-T is a Third Point Add-On Bar that bolts on a third point to pre-existing Cusco strut tower bar for added rigidity and straight contact with the chassis.\u003cbr\u003e\nThe stylish oval cross section is made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eApplies to Type 40, Type CB, Type OS, and Type AS Cusco strut tower bars\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-03-20T14:46:16+08:00","created_at":"2023-03-20T14:46:17+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1989","1990","1991","1992","1993","1994","3-points","aluminium","cusco-japan","cusco-japan30","JP1","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","strut-bars","tva","ws126"],"price":16160,"price_min":16160,"price_max":16160,"available":true,"price_varies":false,"compare_at_price":20200,"compare_at_price_min":20200,"compare_at_price_max":20200,"compare_at_price_varies":false,"variants":[{"id":44654232469779,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"230 544 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Rear Strut brace Type OS-T - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":16160,"weight":3000,"compare_at_price":20200,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS-T_e31724fd-9341-431b-81cf-2f74d563b63c.jpg?v=1679294777"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS-T_e31724fd-9341-431b-81cf-2f74d563b63c.jpg?v=1679294777","options":["Title"],"media":[{"alt":"Cusco - Rear Strut brace Type OS-T - Nissan Skyline GT-R BNR32 - 230 544 A","id":33392541729043,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS-T_e31724fd-9341-431b-81cf-2f74d563b63c.jpg?v=1679294777"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS-T_e31724fd-9341-431b-81cf-2f74d563b63c.jpg?v=1679294777","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 230 544 A\u003cbr\u003eBar Type: Strut brace Type OS-T\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 3 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Strut Brace Type OS-T is a Third Point Add-On Bar that bolts on a third point to pre-existing Cusco strut tower bar for added rigidity and straight contact with the chassis.\u003cbr\u003e\nThe stylish oval cross section is made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eApplies to Type 40, Type CB, Type OS, and Type AS Cusco strut tower bars\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco - Rear Strut brace Type OS-T - Nissan Skyline GT-R BNR32 - 230 544 A

Cusco - Rear Strut brace Type OS-T - Nissan Skyline GT-R BNR32

€161,60

Specifications:Manufacturer: Cusco JapanPart Number: 230 544 ABar Type: Strut brace Type OS-TPosition: RearPoints: 3 PointsMaterial: AluminiumThe Cusco Strut Brace Type OS-T is a Third Point Add-On Bar that bolts on a third point to pre-existing Cusco strut tower bar for added rigidity and straight contact with the chassis. The stylish oval cros...


More Info
25% OFF
Cusco Japan - Cusco Japan - Adjustable Pillow Tension Rods - Nissan - BNR32 - 231 473 ASN - Rzcrewgarage
{"id":8360292286739,"title":"Cusco Japan - Adjustable Pillow Tension Rods - Nissan - Skyline GT-R BNR32","handle":"cusco-japan-adjustable-pillow-tension-rods-nissan-bnr32-231-473-asn","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: +10mm - -10mm\u003cbr\u003e\u003cbr\u003eThese Cusco Adjustable Pillow Tension Rods are a direct replacement for the factory tension rods. Manufactured with superior bushings, and materials while also allowing for adjustable lengths. The durable construction and pillow ball bushing improve stability, steering response and predictability under hard braking, cornering and all handling situations by reducing movement and flexing. Adjustability allows the user to dial in and fine tune toe settings.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-05-23T11:01:51+08:00","created_at":"2023-05-23T11:01:53+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1989","1990","1991","1992","1993","1994","caster-kit","cusco-japan","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","toe-kit","ws125"],"price":36150,"price_min":36150,"price_max":36150,"available":true,"price_varies":false,"compare_at_price":48300,"compare_at_price_min":48300,"compare_at_price_max":48300,"compare_at_price_varies":false,"variants":[{"id":45211457749267,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 473 ASN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Adjustable Pillow Tension Rods - Nissan - Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":36150,"weight":5000,"compare_at_price":48300,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20473_20ASN.jpg?v=1684810913"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20473_20ASN.jpg?v=1684810913","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco Japan - Adjustable Pillow Tension Rods - Nissan - BNR32 - 231 473 ASN - Rzcrewgarage","id":34080877281555,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20473_20ASN.jpg?v=1684810913"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20473_20ASN.jpg?v=1684810913","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: +10mm - -10mm\u003cbr\u003e\u003cbr\u003eThese Cusco Adjustable Pillow Tension Rods are a direct replacement for the factory tension rods. Manufactured with superior bushings, and materials while also allowing for adjustable lengths. The durable construction and pillow ball bushing improve stability, steering response and predictability under hard braking, cornering and all handling situations by reducing movement and flexing. Adjustability allows the user to dial in and fine tune toe settings.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco Japan - Cusco Japan - Adjustable Pillow Tension Rods - Nissan - BNR32 - 231 473 ASN - Rzcrewgarage

Cusco Japan - Adjustable Pillow Tension Rods - Nissan - Skyline GT-R BNR32

€361,50

Specifications:Manufacturer: Cusco JapanPosition: FrontCamber Adjustment Range: +10mm - -10mmThese Cusco Adjustable Pillow Tension Rods are a direct replacement for the factory tension rods. Manufactured with superior bushings, and materials while also allowing for adjustable lengths. The durable construction and pillow ball bushing improve sta...


More Info
27% OFF
Cusco Japan - Cusco Japan - Adjustable Rear Upper Arms - Nissan - BNR32 - 220 474 G - Rzcrewgarage
{"id":8360252473619,"title":"Cusco Japan - Adjustable Rear Upper Arms - Nissan - Skyline GT-R BNR32","handle":"cusco-japan-adjustable-rear-upper-arms-nissan-bnr32-220-474-g","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Rear\u003cbr\u003eCamber Adjustment Range: +12 to -12mm\u003cbr\u003eBushing Type: Rubber\u003cbr\u003e\u003cbr\u003eThe Cusco rear adjustable upper arms enables camber angle adjustment for better alignment, traction and handling. All kit comes complete with hardware for a perfect and bolt on fitting (When available). Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-05-23T10:51:57+08:00","created_at":"2023-05-23T10:52:01+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1989","1990","1991","1992","1993","1994","camber-kit","cusco-japan","JP1","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws125"],"price":32080,"price_min":32080,"price_max":32080,"available":true,"price_varies":false,"compare_at_price":44100,"compare_at_price_min":44100,"compare_at_price_max":44100,"compare_at_price_varies":false,"variants":[{"id":45210999652627,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"220 474 G","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Adjustable Rear Upper Arms - Nissan - Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":32080,"weight":3200,"compare_at_price":44100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/220_20474_20G_0fbf0183-16be-428f-9468-f5fb4fd1dd23.jpg?v=1684810321"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/220_20474_20G_0fbf0183-16be-428f-9468-f5fb4fd1dd23.jpg?v=1684810321","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco Japan - Adjustable Rear Upper Arms - Nissan - BNR32 - 220 474 G - Rzcrewgarage","id":34080778486035,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/220_20474_20G_0fbf0183-16be-428f-9468-f5fb4fd1dd23.jpg?v=1684810321"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/220_20474_20G_0fbf0183-16be-428f-9468-f5fb4fd1dd23.jpg?v=1684810321","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Rear\u003cbr\u003eCamber Adjustment Range: +12 to -12mm\u003cbr\u003eBushing Type: Rubber\u003cbr\u003e\u003cbr\u003eThe Cusco rear adjustable upper arms enables camber angle adjustment for better alignment, traction and handling. All kit comes complete with hardware for a perfect and bolt on fitting (When available). Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco Japan - Cusco Japan - Adjustable Rear Upper Arms - Nissan - BNR32 - 220 474 G - Rzcrewgarage

Cusco Japan - Adjustable Rear Upper Arms - Nissan - Skyline GT-R BNR32

€320,80

Specifications:Manufacturer: Cusco JapanPosition: RearCamber Adjustment Range: +12 to -12mmBushing Type: RubberThe Cusco rear adjustable upper arms enables camber angle adjustment for better alignment, traction and handling. All kit comes complete with hardware for a perfect and bolt on fitting (When available). Why do you need this product:Pro...


More Info
29% OFF
Cusco Japan - Cusco Japan - Negative Upper Camber Arms (+5mm) - Nissan - BNR32 - 231 479 AA - Rzcrewgarage
{"id":8360272658707,"title":"Cusco Japan - Negative Upper Camber Arms (+5mm) - Nissan - Skyline GT-R BNR32","handle":"cusco-japan-negative-upper-camber-arms-5mm-nissan-bnr32-231-479-aa","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: 5mm longer than standard\u003cbr\u003e\u003cbr\u003eThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better handling and even tire wear. They are designed to work with stock suspension or nearly every aftermarket system available. Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-05-23T10:56:51+08:00","created_at":"2023-05-23T10:56:53+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1989","1990","1991","1992","1993","1994","camber-kit","cusco-japan","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws125"],"price":33200,"price_min":33200,"price_max":33200,"available":true,"price_varies":false,"compare_at_price":46900,"compare_at_price_min":46900,"compare_at_price_max":46900,"compare_at_price_varies":false,"variants":[{"id":45211222507795,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 479 AA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Negative Upper Camber Arms (+5mm) - Nissan - Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":33200,"weight":2000,"compare_at_price":46900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AA.jpg?v=1684810613"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AA.jpg?v=1684810613","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco Japan - Negative Upper Camber Arms (+5mm) - Nissan - BNR32 - 231 479 AA - Rzcrewgarage","id":34080829210899,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AA.jpg?v=1684810613"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AA.jpg?v=1684810613","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: 5mm longer than standard\u003cbr\u003e\u003cbr\u003eThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better handling and even tire wear. They are designed to work with stock suspension or nearly every aftermarket system available. Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco Japan - Cusco Japan - Negative Upper Camber Arms (+5mm) - Nissan - BNR32 - 231 479 AA - Rzcrewgarage

Cusco Japan - Negative Upper Camber Arms (+5mm) - Nissan - Skyline GT-R BNR32

€332,00

Specifications:Manufacturer: Cusco JapanPosition: FrontCamber Adjustment Range: 5mm longer than standardThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in ...


More Info
26% OFF
Cusco Japan - Cusco Japan - Negative Upper Camber Arms (-10mm) - Nissan - BNR32 - 231 479 AD - Rzcrewgarage
{"id":8360274297107,"title":"Cusco Japan - Negative Upper Camber Arms (-10mm) - Nissan - Skyline GT-R BNR32","handle":"cusco-japan-negative-upper-camber-arms-10mm-nissan-bnr32-231-479-ad","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: 10mm shorter than standard\u003cbr\u003e\u003cbr\u003eThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better handling and even tire wear. They are designed to work with stock suspension or nearly every aftermarket system available. Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-05-23T10:57:17+08:00","created_at":"2023-05-23T10:57:21+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1989","1990","1991","1992","1993","1994","camber-kit","cusco-japan","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws125"],"price":36810,"price_min":36810,"price_max":36810,"available":true,"price_varies":false,"compare_at_price":50300,"compare_at_price_min":50300,"compare_at_price_max":50300,"compare_at_price_varies":false,"variants":[{"id":45211242463507,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 479 AD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Negative Upper Camber Arms (-10mm) - Nissan - Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":36810,"weight":4000,"compare_at_price":50300,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AD.jpg?v=1684810641"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AD.jpg?v=1684810641","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco Japan - Negative Upper Camber Arms (-10mm) - Nissan - BNR32 - 231 479 AD - Rzcrewgarage","id":34080833208595,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AD.jpg?v=1684810641"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AD.jpg?v=1684810641","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: 10mm shorter than standard\u003cbr\u003e\u003cbr\u003eThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better handling and even tire wear. They are designed to work with stock suspension or nearly every aftermarket system available. Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco Japan - Cusco Japan - Negative Upper Camber Arms (-10mm) - Nissan - BNR32 - 231 479 AD - Rzcrewgarage

Cusco Japan - Negative Upper Camber Arms (-10mm) - Nissan - Skyline GT-R BNR32

€368,10

Specifications:Manufacturer: Cusco JapanPosition: FrontCamber Adjustment Range: 10mm shorter than standardThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results i...


More Info
29% OFF
Cusco Japan - Cusco Japan - Negative Upper Camber Arms (-5mm) - Nissan - BNR32 - 231 479 AC - Rzcrewgarage
{"id":8360273379603,"title":"Cusco Japan - Negative Upper Camber Arms (-5mm) - Nissan - Skyline GT-R BNR32","handle":"cusco-japan-negative-upper-camber-arms-5mm-nissan-bnr32-231-479-ac","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: 5mm shorter than standard\u003cbr\u003e\u003cbr\u003eThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better handling and even tire wear. They are designed to work with stock suspension or nearly every aftermarket system available. Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-05-23T10:57:02+08:00","created_at":"2023-05-23T10:57:06+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1989","1990","1991","1992","1993","1994","camber-kit","cusco-japan","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws125"],"price":33200,"price_min":33200,"price_max":33200,"available":true,"price_varies":false,"compare_at_price":46900,"compare_at_price_min":46900,"compare_at_price_max":46900,"compare_at_price_varies":false,"variants":[{"id":45211231518995,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 479 AC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Negative Upper Camber Arms (-5mm) - Nissan - Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":33200,"weight":2000,"compare_at_price":46900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AC.jpg?v=1684810626"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AC.jpg?v=1684810626","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco Japan - Negative Upper Camber Arms (-5mm) - Nissan - BNR32 - 231 479 AC - Rzcrewgarage","id":34080830914835,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AC.jpg?v=1684810626"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AC.jpg?v=1684810626","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: 5mm shorter than standard\u003cbr\u003e\u003cbr\u003eThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better handling and even tire wear. They are designed to work with stock suspension or nearly every aftermarket system available. Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco Japan - Cusco Japan - Negative Upper Camber Arms (-5mm) - Nissan - BNR32 - 231 479 AC - Rzcrewgarage

Cusco Japan - Negative Upper Camber Arms (-5mm) - Nissan - Skyline GT-R BNR32

€332,00

Specifications:Manufacturer: Cusco JapanPosition: FrontCamber Adjustment Range: 5mm shorter than standardThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in...


More Info
26% OFF
Cusco Japan - Cusco Japan - Negative Upper Camber Arms (Std Size) - Nissan - BNR32 - 231 479 AB - Rzcrewgarage
{"id":8360275280147,"title":"Cusco Japan - Negative Upper Camber Arms (Std Size) - Nissan - Skyline GT-R BNR32","handle":"cusco-japan-negative-upper-camber-arms-std-size-nissan-bnr32-231-479-ab","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: Standard size\u003cbr\u003e\u003cbr\u003eThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better handling and even tire wear. They are designed to work with stock suspension or nearly every aftermarket system available. Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-05-23T10:57:32+08:00","created_at":"2023-05-23T10:57:36+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1989","1990","1991","1992","1993","1994","camber-kit","cusco-japan","front","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws125"],"price":36810,"price_min":36810,"price_max":36810,"available":true,"price_varies":false,"compare_at_price":50300,"compare_at_price_min":50300,"compare_at_price_max":50300,"compare_at_price_varies":false,"variants":[{"id":45211254685971,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 479 AB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Negative Upper Camber Arms (Std Size) - Nissan - Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":36810,"weight":4000,"compare_at_price":50300,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AB.jpg?v=1684810656"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AB.jpg?v=1684810656","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco Japan - Negative Upper Camber Arms (Std Size) - Nissan - BNR32 - 231 479 AB - Rzcrewgarage","id":34080835600659,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AB.jpg?v=1684810656"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20479_20AB.jpg?v=1684810656","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: Standard size\u003cbr\u003e\u003cbr\u003eThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better handling and even tire wear. They are designed to work with stock suspension or nearly every aftermarket system available. Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco Japan - Cusco Japan - Negative Upper Camber Arms (Std Size) - Nissan - BNR32 - 231 479 AB - Rzcrewgarage

Cusco Japan - Negative Upper Camber Arms (Std Size) - Nissan - Skyline GT-R BNR32

€368,10

Specifications:Manufacturer: Cusco JapanPosition: FrontCamber Adjustment Range: Standard sizeThe Cusco Negative Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better hand...


More Info
28% OFF
Cusco Japan - Cusco Japan - Adjustable Rear Upper Arms - Nissan - BNR32 - 231 474 L - Rzcrewgarage
{"id":8360257847571,"title":"Cusco Japan - Pillowball Adjustable Rear Upper Arms - Nissan - Skyline GT-R BNR32","handle":"cusco-japan-adjustable-rear-upper-arms-nissan-bnr32-231-474-l","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Rear\u003cbr\u003eCamber Adjustment Range: +10 to -6mm\u003cbr\u003e\u003cbr\u003eThe Cusco rear adjustable upper arms enables camber angle adjustment for better alignment, traction and handling. All kit comes complete with hardware for a perfect and bolt on fitting (When available). Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-05-23T10:53:03+08:00","created_at":"2023-05-23T10:53:06+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1989","1990","1991","1992","1993","1994","camber-kit","cusco-japan","JP1","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws125"],"price":37840,"price_min":37840,"price_max":37840,"available":true,"price_varies":false,"compare_at_price":52600,"compare_at_price_min":52600,"compare_at_price_max":52600,"compare_at_price_varies":false,"variants":[{"id":45211054309651,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 474 L","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Pillowball Adjustable Rear Upper Arms - Nissan - Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":37840,"weight":3200,"compare_at_price":52600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20474_20L.jpg?v=1684810386"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20474_20L.jpg?v=1684810386","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco Japan - Adjustable Rear Upper Arms - Nissan - BNR32 - 231 474 L - Rzcrewgarage","id":34080792346899,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20474_20L.jpg?v=1684810386"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/231_20474_20L.jpg?v=1684810386","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Rear\u003cbr\u003eCamber Adjustment Range: +10 to -6mm\u003cbr\u003e\u003cbr\u003eThe Cusco rear adjustable upper arms enables camber angle adjustment for better alignment, traction and handling. All kit comes complete with hardware for a perfect and bolt on fitting (When available). Why do you need this product:\u003cbr\u003e\u003cbr\u003eProvides proper camber angle and improves car handling.\u003cbr\u003ePrevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction.\u003cbr\u003e Perfect alignement results in better handling.\u003cbr\u003eAn improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods.\u003cbr\u003ePerfectly crafted Japanese made product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}
Cusco Japan - Cusco Japan - Adjustable Rear Upper Arms - Nissan - BNR32 - 231 474 L - Rzcrewgarage

Cusco Japan - Pillowball Adjustable Rear Upper Arms - Nissan - Skyline GT-R BNR32

€378,40

Specifications:Manufacturer: Cusco JapanPosition: RearCamber Adjustment Range: +10 to -6mmThe Cusco rear adjustable upper arms enables camber angle adjustment for better alignment, traction and handling. All kit comes complete with hardware for a perfect and bolt on fitting (When available). Why do you need this product:Provides proper camber a...


More Info
19% OFF
Cusco Japan - Street Zero A Coilover Kit - Nissan Skyline GT-R BNR32 - 231 61N CN - Rzcrewgarage
{"id":1778139791471,"title":"Cusco Japan - Street Zero A Coilover Kit - Nissan Skyline GT-R BNR32","handle":"cusco-japan-street-zero-a-coilover-kit-nissan-skyline-gt-r-bnr32-231-61n-cn","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 61N CN\u003cbr\u003eType: Cusco Street Zero A Ref 231 61N CN\u003cbr\u003eFront Specs: 40 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -45 to -10 ? -45 to 0\u003cbr\u003eMaximum adjustment F\/R: -50 to 0 ? --85 to 0\u003cbr\u003eSpring Rates (Kg): 10 or (9\/11\/12)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 8 or (7\/9\/10)\u003cbr\u003eAdditional Infos: E-con2 compatible, 4996338028327\u003cbr\u003e\u003cbr\u003e The Street ZERO-A features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.\u003cbr\u003eFactory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.\u003cbr\u003e\u003cbr\u003eEach coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient \"comfort\" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button. (via Econ2). \u003cbr\u003e\u003cbr\u003eCPRV Internal Pressure Valve Technology\u003cbr\u003eA pressure dependant bypass is designed at the base of the damper rod where the amount of hydraulic fluid passes through is automatically compensated for the perfect dampening rate. This feature serves vital when the dampening approaches a dangerously low level typically experienced at the low and mid shock dampening rate. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e\u003cbr\u003e40 way adjustable needle valve shock absorber w\/ CPRV base valve\u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eFull height adjustable structure, for full shock stroke capabilities\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with different metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:27:31+08:00","created_at":"2018-10-25T23:27:33+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["1989","1990","1991","1992","1993","1994","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","dampening-and-height-adjustable","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6"],"price":183000,"price_min":183000,"price_max":183000,"available":true,"price_varies":false,"compare_at_price":228720,"compare_at_price_min":228720,"compare_at_price_max":228720,"compare_at_price_varies":false,"variants":[{"id":16766305370223,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 61N CN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Zero A Coilover Kit - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":183000,"weight":26500,"compare_at_price":228720,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_785bfbf0-06b0-4231-8d38-ced013d4faf5.jpg?v=1571709563"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_785bfbf0-06b0-4231-8d38-ced013d4faf5.jpg?v=1571709563","options":["Title"],"media":[{"alt":"Cusco Japan - Street Zero A Coilover Kit - Nissan Skyline GT-R BNR32 - 231 61N CN - Rzcrewgarage","id":1287577239663,"position":1,"preview_image":{"aspect_ratio":1.645,"height":1084,"width":1783,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_785bfbf0-06b0-4231-8d38-ced013d4faf5.jpg?v=1571709563"},"aspect_ratio":1.645,"height":1084,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_785bfbf0-06b0-4231-8d38-ced013d4faf5.jpg?v=1571709563","width":1783}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 61N CN\u003cbr\u003eType: Cusco Street Zero A Ref 231 61N CN\u003cbr\u003eFront Specs: 40 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -45 to -10 ? -45 to 0\u003cbr\u003eMaximum adjustment F\/R: -50 to 0 ? --85 to 0\u003cbr\u003eSpring Rates (Kg): 10 or (9\/11\/12)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 8 or (7\/9\/10)\u003cbr\u003eAdditional Infos: E-con2 compatible, 4996338028327\u003cbr\u003e\u003cbr\u003e The Street ZERO-A features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.\u003cbr\u003eFactory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.\u003cbr\u003e\u003cbr\u003eEach coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient \"comfort\" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button. (via Econ2). \u003cbr\u003e\u003cbr\u003eCPRV Internal Pressure Valve Technology\u003cbr\u003eA pressure dependant bypass is designed at the base of the damper rod where the amount of hydraulic fluid passes through is automatically compensated for the perfect dampening rate. This feature serves vital when the dampening approaches a dangerously low level typically experienced at the low and mid shock dampening rate. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e\u003cbr\u003e40 way adjustable needle valve shock absorber w\/ CPRV base valve\u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eFull height adjustable structure, for full shock stroke capabilities\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with different metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Street Zero A Coilover Kit - Nissan Skyline GT-R BNR32 - 231 61N CN - Rzcrewgarage

Cusco Japan - Street Zero A Coilover Kit - Nissan Skyline GT-R BNR32

€1.830,00

Specifications:Manufacturer: Cusco JapanPart Number: 231 61N CNType: Cusco Street Zero A Ref 231 61N CNFront Specs: 40 steps Full-length AdjustableRecommended Height F/R: -45 to -10 ? -45 to 0Maximum adjustment F/R: -50 to 0 ? --85 to 0Spring Rates (Kg): 10 or (9/11/12)Rear Specs: 40 steps Full-length AdjustableSpring Rates (Kg): 8 or (7/9/10)Ad...


More Info
20% OFF
Cusco Japan - Street Zero Coilover Kit - Nissan Skyline GT-R BNR32 - 231 61P CN - Rzcrewgarage
{"id":1778139660399,"title":"Cusco Japan - Street Zero Coilover Kit - Nissan Skyline GT-R BNR32","handle":"cusco-japan-street-zero-coilover-kit-nissan-skyline-gt-r-bnr32-231-61p-cn","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 61P CN\u003cbr\u003eType: Street Zero Ref 231 61P CN\u003cbr\u003eFront Specs: - Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -60 to -0 ? -45 to -0\u003cbr\u003eMaximum adjustment F\/R: -60 to -0 ? -83 to -0\u003cbr\u003eSpring Rates (Kg): 11 or (9\/10\/12\/14)\u003cbr\u003e\u003cbr\u003eRear Specs: - Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 9 or (7\/8\/10\/11)\u003cbr\u003eOptions: 231 61P CN\u003cbr\u003eAdditional Infos: 4996338091376\u003cbr\u003e\u003cbr\u003e The STREET ZERO series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is designed as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at a competitive price point.\u003cbr\u003e\u003cbr\u003eThe newly developed twin tube shock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models. This suspension coilover basically is a full ride height adjustable system where the shock absorber stroke and spring pre-load rate is retained no matter what the vehicle ride height is set at.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eLow compression twin-tube shock absorber with redesigned base valve\u003cbr\u003eFull height adjustable structure \u0026amp; fixed damper set at most ideal rate\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:27:28+08:00","created_at":"2018-10-25T23:27:30+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["1989","1990","1991","1992","1993","1994","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","height-adjustable","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6"],"price":161280,"price_min":161280,"price_max":161280,"available":true,"price_varies":false,"compare_at_price":201600,"compare_at_price_min":201600,"compare_at_price_max":201600,"compare_at_price_varies":false,"variants":[{"id":16766304813167,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"231 61P CN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Zero Coilover Kit - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":161280,"weight":26500,"compare_at_price":201600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_6874b42c-4ca5-4d23-95ab-899028ee4215.jpg?v=1571709563"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_6874b42c-4ca5-4d23-95ab-899028ee4215.jpg?v=1571709563","options":["Title"],"media":[{"alt":"Cusco Japan - Street Zero Coilover Kit - Nissan Skyline GT-R BNR32 - 231 61P CN - Rzcrewgarage","id":1287577174127,"position":1,"preview_image":{"aspect_ratio":1.644,"height":1084,"width":1782,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_6874b42c-4ca5-4d23-95ab-899028ee4215.jpg?v=1571709563"},"aspect_ratio":1.644,"height":1084,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_6874b42c-4ca5-4d23-95ab-899028ee4215.jpg?v=1571709563","width":1782}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 231 61P CN\u003cbr\u003eType: Street Zero Ref 231 61P CN\u003cbr\u003eFront Specs: - Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -60 to -0 ? -45 to -0\u003cbr\u003eMaximum adjustment F\/R: -60 to -0 ? -83 to -0\u003cbr\u003eSpring Rates (Kg): 11 or (9\/10\/12\/14)\u003cbr\u003e\u003cbr\u003eRear Specs: - Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 9 or (7\/8\/10\/11)\u003cbr\u003eOptions: 231 61P CN\u003cbr\u003eAdditional Infos: 4996338091376\u003cbr\u003e\u003cbr\u003e The STREET ZERO series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is designed as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at a competitive price point.\u003cbr\u003e\u003cbr\u003eThe newly developed twin tube shock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models. This suspension coilover basically is a full ride height adjustable system where the shock absorber stroke and spring pre-load rate is retained no matter what the vehicle ride height is set at.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eLow compression twin-tube shock absorber with redesigned base valve\u003cbr\u003eFull height adjustable structure \u0026amp; fixed damper set at most ideal rate\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Street Zero Coilover Kit - Nissan Skyline GT-R BNR32 - 231 61P CN - Rzcrewgarage

Cusco Japan - Street Zero Coilover Kit - Nissan Skyline GT-R BNR32

€1.612,80

Specifications:Manufacturer: Cusco JapanPart Number: 231 61P CNType: Street Zero Ref 231 61P CNFront Specs: - Full-length AdjustableRecommended Height F/R: -60 to -0 ? -45 to -0Maximum adjustment F/R: -60 to -0 ? -83 to -0Spring Rates (Kg): 11 or (9/10/12/14)Rear Specs: - Full-length AdjustableSpring Rates (Kg): 9 or (7/8/10/11)Options: 231 61P...


More Info
Sold Out
Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available)   Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 S
{"id":6950680920175,"title":"Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Front LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-pro-adjust-type-mz-1-way-initial-setup-1-5way-2way-available-front-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-137-s","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 137 S\u003cbr\u003eLSD Model: Pro Adjust Type Mz\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits open differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:40:04+08:00","created_at":"2022-02-15T18:40:05+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1-way","1989","1990","1991","1992","1993","1994","2-way","cusco-japan","front","limited-slip-diffs","mt","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":148000,"price_min":148000,"price_max":148000,"available":false,"price_varies":false,"compare_at_price":160900,"compare_at_price_min":160900,"compare_at_price_max":160900,"compare_at_price_varies":false,"variants":[{"id":40746310107247,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 137 S","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Front LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":148000,"weight":11000,"compare_at_price":160900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_3b775e7e-bf09-4cc7-b07c-9b1ccfa856b3.jpg?v=1660710147"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_3b775e7e-bf09-4cc7-b07c-9b1ccfa856b3.jpg?v=1660710147","options":["Title"],"media":[{"alt":"Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 S","id":23781638307951,"position":1,"preview_image":{"aspect_ratio":0.928,"height":485,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_3b775e7e-bf09-4cc7-b07c-9b1ccfa856b3.jpg?v=1660710147"},"aspect_ratio":0.928,"height":485,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_3b775e7e-bf09-4cc7-b07c-9b1ccfa856b3.jpg?v=1660710147","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 137 S\u003cbr\u003eLSD Model: Pro Adjust Type Mz\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits open differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available)   Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 S

Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Front LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.480,00

Specifications:Manufacturer: Cusco JapanPart Number: LSD 137 SLSD Model: Pro Adjust Type MzLSD Type: 1 way initial setup (1.5way 2way available) Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The pro Adjust LSD as his name states is for driver who needs different type of LSD response. T...


More Info
Sold Out
Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 SB
{"id":6950680952943,"title":"Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-pro-adjust-type-mz-1-way-initial-setup-1-5way-2way-available-rear-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-271-sb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 271 SB\u003cbr\u003eLSD Model: Pro Adjust Type Mz\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:40:06+08:00","created_at":"2022-02-15T18:40:07+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1-way","1989","1990","1991","1992","1993","1994","2-way","cusco-japan","limited-slip-diffs","mt","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":157200,"price_min":157200,"price_max":157200,"available":false,"price_varies":false,"compare_at_price":170900,"compare_at_price_min":170900,"compare_at_price_max":170900,"compare_at_price_varies":false,"variants":[{"id":40746310140015,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 271 SB","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":157200,"weight":11000,"compare_at_price":170900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_cac4acd3-2374-4373-b36b-540637f7b415.jpg?v=1660710148"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_cac4acd3-2374-4373-b36b-540637f7b415.jpg?v=1660710148","options":["Title"],"media":[{"alt":"Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 SB","id":23781638340719,"position":1,"preview_image":{"aspect_ratio":0.928,"height":485,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_cac4acd3-2374-4373-b36b-540637f7b415.jpg?v=1660710148"},"aspect_ratio":0.928,"height":485,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_cac4acd3-2374-4373-b36b-540637f7b415.jpg?v=1660710148","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 271 SB\u003cbr\u003eLSD Model: Pro Adjust Type Mz\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 SB

Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.572,00

Specifications:Manufacturer: Cusco JapanPart Number: LSD 271 SBLSD Model: Pro Adjust Type MzLSD Type: 1 way initial setup (1.5way 2way available) Transmission Type: MTPosition: RearIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The pro Adjust LSD as his name states is for driver who needs different type of LSD response. T...


More Info
Sold Out
Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 S
{"id":6950680985711,"title":"Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-pro-adjust-type-mz-1-way-initial-setup-1-5way-2way-available-rear-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-169-s","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 169 S\u003cbr\u003eLSD Model: Pro Adjust Type Mz\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:40:08+08:00","created_at":"2022-02-15T18:40:08+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1-way","1989","1990","1991","1992","1993","1994","2-way","cusco-japan","limited-slip-diffs","mt","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":157200,"price_min":157200,"price_max":157200,"available":false,"price_varies":false,"compare_at_price":170900,"compare_at_price_min":170900,"compare_at_price_max":170900,"compare_at_price_varies":false,"variants":[{"id":40746310172783,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 169 S","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":157200,"weight":11000,"compare_at_price":170900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_ce527564-61bc-45a8-96a4-0ef6129127ba.jpg?v=1660710150"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_ce527564-61bc-45a8-96a4-0ef6129127ba.jpg?v=1660710150","options":["Title"],"media":[{"alt":"Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 S","id":23781638373487,"position":1,"preview_image":{"aspect_ratio":0.928,"height":485,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_ce527564-61bc-45a8-96a4-0ef6129127ba.jpg?v=1660710150"},"aspect_ratio":0.928,"height":485,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_lsd_type_MZ_pro_adjust_ce527564-61bc-45a8-96a4-0ef6129127ba.jpg?v=1660710150","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 169 S\u003cbr\u003eLSD Model: Pro Adjust Type Mz\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 S

Cusco Japan Pro Adjust Type Mz - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.572,00

Specifications:Manufacturer: Cusco JapanPart Number: LSD 169 SLSD Model: Pro Adjust Type MzLSD Type: 1 way initial setup (1.5way 2way available) Transmission Type: MTPosition: RearIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The pro Adjust LSD as his name states is for driver who needs different type of LSD response. Th...


More Info
Sold Out
Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available)   Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 R
{"id":6950680821871,"title":"Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Front LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-pro-adjust-type-rs-1-way-initial-setup-1-5way-2way-available-front-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-137-r","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 137 R\u003cbr\u003eLSD Model: Pro Adjust Type Rs\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup. \u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits open differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:39:59+08:00","created_at":"2022-02-15T18:40:00+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1-way","1989","1990","1991","1992","1993","1994","2-way","cusco-japan","front","limited-slip-diffs","mt","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":146400,"price_min":146400,"price_max":146400,"available":false,"price_varies":false,"compare_at_price":159100,"compare_at_price_min":159100,"compare_at_price_max":159100,"compare_at_price_varies":false,"variants":[{"id":40746309976175,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 137 R","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Front LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":146400,"weight":10000,"compare_at_price":159100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_cf23449b-8276-4e48-a034-24259527d241.jpg?v=1660710141"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_cf23449b-8276-4e48-a034-24259527d241.jpg?v=1660710141","options":["Title"],"media":[{"alt":"Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 R","id":23781638144111,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_cf23449b-8276-4e48-a034-24259527d241.jpg?v=1660710141"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_cf23449b-8276-4e48-a034-24259527d241.jpg?v=1660710141","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 137 R\u003cbr\u003eLSD Model: Pro Adjust Type Rs\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup. \u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits open differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available)   Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 R

Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Front LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.464,00

Specifications:Manufacturer: Cusco JapanPart Number: LSD 137 RLSD Model: Pro Adjust Type RsLSD Type: 1 way initial setup (1.5way 2way available) Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The pro Adjust LSD as his name states is for driver who needs different type of LSD response. T...


More Info
Sold Out
Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 R
{"id":6950680887407,"title":"Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-pro-adjust-type-rs-1-way-initial-setup-1-5way-2way-available-rear-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-169-r","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 169 R\u003cbr\u003eLSD Model: Pro Adjust Type Rs\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup. \u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:40:02+08:00","created_at":"2022-02-15T18:40:03+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1-way","1989","1990","1991","1992","1993","1994","2-way","cusco-japan","limited-slip-diffs","mt","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":155600,"price_min":155600,"price_max":155600,"available":false,"price_varies":false,"compare_at_price":169100,"compare_at_price_min":169100,"compare_at_price_max":169100,"compare_at_price_varies":false,"variants":[{"id":40746310041711,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 169 R","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":155600,"weight":10000,"compare_at_price":169100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_d738fdfa-6c2b-4d22-8783-e4d7aa822dae.jpg?v=1660710145"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_d738fdfa-6c2b-4d22-8783-e4d7aa822dae.jpg?v=1660710145","options":["Title"],"media":[{"alt":"Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 R","id":23781638242415,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_d738fdfa-6c2b-4d22-8783-e4d7aa822dae.jpg?v=1660710145"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_d738fdfa-6c2b-4d22-8783-e4d7aa822dae.jpg?v=1660710145","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 169 R\u003cbr\u003eLSD Model: Pro Adjust Type Rs\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup. \u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 R

Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.556,00

Specifications:Manufacturer: Cusco JapanPart Number: LSD 169 RLSD Model: Pro Adjust Type RsLSD Type: 1 way initial setup (1.5way 2way available) Transmission Type: MTPosition: RearIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The pro Adjust LSD as his name states is for driver who needs different type of LSD response. Th...


More Info
Sold Out
Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 RB
{"id":6950680854639,"title":"Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-pro-adjust-type-rs-1-way-initial-setup-1-5way-2way-available-rear-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-271-rb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 271 RB\u003cbr\u003eLSD Model: Pro Adjust Type Rs\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup. \u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:40:01+08:00","created_at":"2022-02-15T18:40:02+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1-way","1989","1990","1991","1992","1993","1994","2-way","cusco-japan","limited-slip-diffs","mt","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":155600,"price_min":155600,"price_max":155600,"available":false,"price_varies":false,"compare_at_price":169100,"compare_at_price_min":169100,"compare_at_price_max":169100,"compare_at_price_varies":false,"variants":[{"id":40746310008943,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 271 RB","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":155600,"weight":10000,"compare_at_price":169100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_08de0974-3ee2-47d3-bd85-14c90123a8ef.jpg?v=1660710143"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_08de0974-3ee2-47d3-bd85-14c90123a8ef.jpg?v=1660710143","options":["Title"],"media":[{"alt":"Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 RB","id":23781638176879,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_08de0974-3ee2-47d3-bd85-14c90123a8ef.jpg?v=1660710143"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Pro_adjust_type_RS_cusco_lsd_08de0974-3ee2-47d3-bd85-14c90123a8ef.jpg?v=1660710143","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 271 RB\u003cbr\u003eLSD Model: Pro Adjust Type Rs\u003cbr\u003eLSD Type: 1 way initial setup (1.5way 2way available) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe pro Adjust LSD as his name states is for driver who needs different type of LSD response. The different angle cams available are perfect to switch from 1 to 2 ways in the blink of an eye. Cams are sold separetly yet this set comes with the 1 way setup. \u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 RB

Cusco Japan Pro Adjust Type Rs - 1 way initial setup (1.5way 2way available) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.556,00

Specifications:Manufacturer: Cusco JapanPart Number: LSD 271 RBLSD Model: Pro Adjust Type RsLSD Type: 1 way initial setup (1.5way 2way available) Transmission Type: MTPosition: RearIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The pro Adjust LSD as his name states is for driver who needs different type of LSD response. T...


More Info
8% OFF
Cusco Japan Type Mz - 1 way (1&2way)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 EB
{"id":6950679707759,"title":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-type-mz-1-way-1-2way-rear-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-271-eb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 271 EB\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:38:55+08:00","created_at":"2022-02-15T18:38:56+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","1989","1990","1991","1992","1993","1994","cusco-japan","limited-slip-diffs","mt","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":140520,"price_min":140520,"price_max":140520,"available":true,"price_varies":false,"compare_at_price":152760,"compare_at_price_min":152760,"compare_at_price_max":152760,"compare_at_price_varies":false,"variants":[{"id":40746308468847,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 271 EB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":140520,"weight":11000,"compare_at_price":152760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_72680467-99c7-458d-9a71-016a74dfaa28.jpg?v=1660710080"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_72680467-99c7-458d-9a71-016a74dfaa28.jpg?v=1660710080","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 EB","id":23781636243567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_72680467-99c7-458d-9a71-016a74dfaa28.jpg?v=1660710080"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_72680467-99c7-458d-9a71-016a74dfaa28.jpg?v=1660710080","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 271 EB\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Mz - 1 way (1&2way)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 EB

Cusco Japan Type Mz - 1 way (1&2way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.405,20

Specifications:Manufacturer: Cusco JapanPart Number: LSD 271 EBLSD Model: Type MzLSD Type: 1 way (1&2way) Transmission Type: MTPosition: RearIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque a...


More Info
8% OFF
Cusco Japan Type Mz - 1 way (1&2way)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 E
{"id":6950679838831,"title":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-type-mz-1-way-1-2way-rear-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-169-e","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 169 E\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:39:08+08:00","created_at":"2022-02-15T18:39:08+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","1989","1990","1991","1992","1993","1994","cusco-japan","limited-slip-diffs","mt","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":140520,"price_min":140520,"price_max":140520,"available":true,"price_varies":false,"compare_at_price":152760,"compare_at_price_min":152760,"compare_at_price_max":152760,"compare_at_price_varies":false,"variants":[{"id":40746308665455,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 169 E","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":140520,"weight":11000,"compare_at_price":152760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_157cedf8-ed15-4827-9eec-c715d1111bec.jpg?v=1660710090"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_157cedf8-ed15-4827-9eec-c715d1111bec.jpg?v=1660710090","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 E","id":23781636440175,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_157cedf8-ed15-4827-9eec-c715d1111bec.jpg?v=1660710090"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_157cedf8-ed15-4827-9eec-c715d1111bec.jpg?v=1660710090","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 169 E\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Mz - 1 way (1&2way)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 E

Cusco Japan Type Mz - 1 way (1&2way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.405,20

Specifications:Manufacturer: Cusco JapanPart Number: LSD 169 ELSD Model: Type MzLSD Type: 1 way (1&2way) Transmission Type: MTPosition: RearIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque an...


More Info
7% OFF
Cusco Japan Type Mz - 1 way(1 & 1.5way)   Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 B
{"id":6950679642223,"title":"Cusco Japan Type Mz - 1 way(1 \u0026 1.5way) Front LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-type-mz-1-way1-1-5way-front-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-137-b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 137 B\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1 way(1 \u0026amp; 1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits open differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:38:50+08:00","created_at":"2022-02-15T18:38:51+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","1989","1990","1991","1992","1993","1994","cusco-japan","front","limited-slip-diffs","mt","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":131520,"price_min":131520,"price_max":131520,"available":true,"price_varies":false,"compare_at_price":142920,"compare_at_price_min":142920,"compare_at_price_max":142920,"compare_at_price_varies":false,"variants":[{"id":40746308403311,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 137 B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1 way(1 \u0026 1.5way) Front LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":131520,"weight":11000,"compare_at_price":142920,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_90f2714a-296a-4fb3-9d2a-0cd33625ac74.jpg?v=1660710077"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_90f2714a-296a-4fb3-9d2a-0cd33625ac74.jpg?v=1660710077","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1 way(1 \u0026 1.5way) Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 B","id":23781636145263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_90f2714a-296a-4fb3-9d2a-0cd33625ac74.jpg?v=1660710077"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_90f2714a-296a-4fb3-9d2a-0cd33625ac74.jpg?v=1660710077","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 137 B\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1 way(1 \u0026amp; 1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits open differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Mz - 1 way(1 & 1.5way)   Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 B

Cusco Japan Type Mz - 1 way(1 & 1.5way) Front LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.315,20

Specifications:Manufacturer: Cusco JapanPart Number: LSD 137 BLSD Model: Type MzLSD Type: 1 way(1 & 1.5way) Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torqu...


More Info
8% OFF
Cusco Japan Type Mz - 1.5 way (1.5&2way)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 K15B
{"id":6950679773295,"title":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-type-mz-1-5-way-1-5-2way-rear-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-271-k15b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 271 K15B\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:39:03+08:00","created_at":"2022-02-15T18:39:04+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1989","1990","1991","1992","1993","1994","cusco-japan","limited-slip-diffs","mt","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":140520,"price_min":140520,"price_max":140520,"available":true,"price_varies":false,"compare_at_price":152760,"compare_at_price_min":152760,"compare_at_price_max":152760,"compare_at_price_varies":false,"variants":[{"id":40746308567151,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 271 K15B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":140520,"weight":11000,"compare_at_price":152760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_6692e383-86f6-44b6-9724-274a93474126.jpg?v=1660710087"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_6692e383-86f6-44b6-9724-274a93474126.jpg?v=1660710087","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 K15B","id":23781636374639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_6692e383-86f6-44b6-9724-274a93474126.jpg?v=1660710087"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_6692e383-86f6-44b6-9724-274a93474126.jpg?v=1660710087","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 271 K15B\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Mz - 1.5 way (1.5&2way)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 K15B

Cusco Japan Type Mz - 1.5 way (1.5&2way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.405,20

Specifications:Manufacturer: Cusco JapanPart Number: LSD 271 K15BLSD Model: Type MzLSD Type: 1.5 way (1.5&2way) Transmission Type: MTPosition: RearIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better to...


More Info
8% OFF
Cusco Japan Type Mz - 1.5 way (1.5&2way)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 K15
{"id":6950679904367,"title":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-type-mz-1-5-way-1-5-2way-rear-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-169-k15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 169 K15\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:39:12+08:00","created_at":"2022-02-15T18:39:12+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1989","1990","1991","1992","1993","1994","cusco-japan","limited-slip-diffs","mt","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":140520,"price_min":140520,"price_max":140520,"available":true,"price_varies":false,"compare_at_price":152760,"compare_at_price_min":152760,"compare_at_price_max":152760,"compare_at_price_varies":false,"variants":[{"id":40746308730991,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 169 K15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":140520,"weight":11000,"compare_at_price":152760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_821f5ea5-81f2-403b-ab06-4e1ef12ed164.jpg?v=1660710093"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_821f5ea5-81f2-403b-ab06-4e1ef12ed164.jpg?v=1660710093","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 K15","id":23781636505711,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_821f5ea5-81f2-403b-ab06-4e1ef12ed164.jpg?v=1660710093"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_821f5ea5-81f2-403b-ab06-4e1ef12ed164.jpg?v=1660710093","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 169 K15\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Mz - 1.5 way (1.5&2way)   Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 169 K15

Cusco Japan Type Mz - 1.5 way (1.5&2way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.405,20

Specifications:Manufacturer: Cusco JapanPart Number: LSD 169 K15LSD Model: Type MzLSD Type: 1.5 way (1.5&2way) Transmission Type: MTPosition: RearIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better tor...


More Info
7% OFF
Cusco Japan Type Mz - 1.5way(1&1.5way)   Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 B15
{"id":6950679674991,"title":"Cusco Japan Type Mz - 1.5way(1\u00261.5way) Front LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-type-mz-1-5way1-1-5way-front-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-137-b15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 137 B15\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5way(1\u0026amp;1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits open differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:38:52+08:00","created_at":"2022-02-15T18:38:53+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1989","1990","1991","1992","1993","1994","cusco-japan","front","limited-slip-diffs","mt","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":131520,"price_min":131520,"price_max":131520,"available":true,"price_varies":false,"compare_at_price":142920,"compare_at_price_min":142920,"compare_at_price_max":142920,"compare_at_price_varies":false,"variants":[{"id":40746308436079,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 137 B15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1.5way(1\u00261.5way) Front LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":131520,"weight":11000,"compare_at_price":142920,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_98895403-e847-4d13-b027-8330f2fce9bc.jpg?v=1660710078"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_98895403-e847-4d13-b027-8330f2fce9bc.jpg?v=1660710078","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1.5way(1\u00261.5way) Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 B15","id":23781636178031,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_98895403-e847-4d13-b027-8330f2fce9bc.jpg?v=1660710078"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_98895403-e847-4d13-b027-8330f2fce9bc.jpg?v=1660710078","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 137 B15\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5way(1\u0026amp;1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits open differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Mz - 1.5way(1&1.5way)   Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 B15

Cusco Japan Type Mz - 1.5way(1&1.5way) Front LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.315,20

Specifications:Manufacturer: Cusco JapanPart Number: LSD 137 B15LSD Model: Type MzLSD Type: 1.5way(1&1.5way) Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torq...


More Info
7% OFF
Cusco Japan Type Mz - 1way   Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 A
{"id":6950679609455,"title":"Cusco Japan Type Mz - 1way Front LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-type-mz-1way-front-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-137-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 137 A\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1way \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits open differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:38:48+08:00","created_at":"2022-02-15T18:38:49+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","1989","1990","1991","1992","1993","1994","cusco-japan","front","limited-slip-diffs","mt","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":131520,"price_min":131520,"price_max":131520,"available":true,"price_varies":false,"compare_at_price":142920,"compare_at_price_min":142920,"compare_at_price_max":142920,"compare_at_price_varies":false,"variants":[{"id":40746308337775,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 137 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1way Front LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":131520,"weight":11000,"compare_at_price":142920,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_da19478b-3bf6-4b76-bc9c-2b9fc1b12d5e.jpg?v=1660710075"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_da19478b-3bf6-4b76-bc9c-2b9fc1b12d5e.jpg?v=1660710075","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1way Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 A","id":23781636112495,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_da19478b-3bf6-4b76-bc9c-2b9fc1b12d5e.jpg?v=1660710075"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_da19478b-3bf6-4b76-bc9c-2b9fc1b12d5e.jpg?v=1660710075","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 137 A\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1way \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits open differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Mz - 1way   Front LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 137 A

Cusco Japan Type Mz - 1way Front LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.315,20

Specifications:Manufacturer: Cusco JapanPart Number: LSD 137 ALSD Model: Type MzLSD Type: 1way Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distr...


More Info
8% OFF
Cusco Japan Type Mz - 2 way (1&2way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 E2B
{"id":6950679740527,"title":"Cusco Japan Type Mz - 2 way (1\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","handle":"cusco-japan-type-mz-2-way-1-2way-rear-lsd-nissan-skyline-gt-r-bnr32-mt-bnr32-lsd-271-e2b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 271 E2B\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:38:59+08:00","created_at":"2022-02-15T18:39:01+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1989","1990","1991","1992","1993","1994","2-way","cusco-japan","limited-slip-diffs","mt","nissan","rear","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva","ws123"],"price":140520,"price_min":140520,"price_max":140520,"available":true,"price_varies":false,"compare_at_price":152760,"compare_at_price_min":152760,"compare_at_price_max":152760,"compare_at_price_varies":false,"variants":[{"id":40746308534383,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 271 E2B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 2 way (1\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)","public_title":null,"options":["Default Title"],"price":140520,"weight":11000,"compare_at_price":152760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_c0eebcb6-e493-4188-b034-18564a9cb38a.jpg?v=1660710081"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_c0eebcb6-e493-4188-b034-18564a9cb38a.jpg?v=1660710081","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 2 way (1\u00262way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 E2B","id":23781636276335,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_c0eebcb6-e493-4188-b034-18564a9cb38a.jpg?v=1660710081"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_c0eebcb6-e493-4188-b034-18564a9cb38a.jpg?v=1660710081","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 271 E2B\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003e\u003cstrong\u003eFits mechanical differential oem gearbox.\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Mz - 2 way (1&2way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT) - BNR32 - LSD 271 E2B

Cusco Japan Type Mz - 2 way (1&2way) Rear LSD - Nissan Skyline GT-R - BNR32 (MT)

€1.405,20

Specifications:Manufacturer: Cusco JapanPart Number: LSD 271 E2BLSD Model: Type MzLSD Type: 2 way (1&2way)Transmission Type: MTPosition: RearIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque an...


More Info