{"id":2125312557167,"title":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Mark II SX90Mark II","handle":"hks-hipermax-iv-gt-coilovers-toyota-mark-ii-sx90mark-ii-80230-at009","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:38+08:00","created_at":"2019-02-08T13:06:38+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","mark-ii-sx90-1992-1996-na-4s-fe-i4","toyota"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495519343,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Mark II SX90Mark II","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_53d1297f-dd3a-4136-bb52-7b21a3e10296.jpg?v=1571709619"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_53d1297f-dd3a-4136-bb52-7b21a3e10296.jpg?v=1571709619","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Toyota Mark II SX90Mark II - 80230-AT009 - RZCrewGarage","id":1850808696943,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_53d1297f-dd3a-4136-bb52-7b21a3e10296.jpg?v=1571709619"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_53d1297f-dd3a-4136-bb52-7b21a3e10296.jpg?v=1571709619","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e"}
HKS - HIPERMAX IV GT Coilover Kit - Toyota Mark II SX90Mark II
Specifications:
Manufacturer: HKS
Part Number: 80230-AT009
Type: MAX IV GT
Ref: 80230-AT009
Front:
Dampening Adjustment: 30 Steps
Lowering: -33mm (Max Adjustment: 0 ~ -99
Spring Rate: 10kg
Rebound Setting: 150Nm
Compression Setting: 37Nm
Rear:
Dampening Adjustment: 30 Steps
Lowering: -31mm (Max Adjustment: 0 ~ -119
Spring Rate: F=98(10)/R=78(8)kg
Rebound Setting: 10Nm
Compression Setting: 2.3Nm
Remarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.
Single Tube Damper Design
Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.
Dust Boot
Protect the shaft from the flying stones.
PNE Coating
Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.
M Shaft (?46 normal type)
With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.
Adopted Pillow Ball Upper Mount
For more accurate and sharp steering.
New Design Needle
Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.
Reduction of Unsprung Weight
In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)
30 Step Damping Force Adjustment
30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.
Manufacturer: HKS
Part Number: 80230-AT009
Type: MAX IV GT
Ref: 80230-AT009
Front:
Dampening Adjustment: 30 Steps
Lowering: -33mm (Max Adjustment: 0 ~ -99
Spring Rate: 10kg
Rebound Setting: 150Nm
Compression Setting: 37Nm
Rear:
Dampening Adjustment: 30 Steps
Lowering: -31mm (Max Adjustment: 0 ~ -119
Spring Rate: F=98(10)/R=78(8)kg
Rebound Setting: 10Nm
Compression Setting: 2.3Nm
Remarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.
Single Tube Damper Design
Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.
Dust Boot
Protect the shaft from the flying stones.
PNE Coating
Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.
M Shaft (?46 normal type)
With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.
Adopted Pillow Ball Upper Mount
For more accurate and sharp steering.
New Design Needle
Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.
Reduction of Unsprung Weight
In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)
30 Step Damping Force Adjustment
30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.
Taxes:
TVA / IVA / VAT: All import taxes (TVA / IVA / VAT) are included in our pricing. No other taxes will be charged to you during delivery!
TVA / IVA / VAT: All import taxes (TVA / IVA / VAT) are included in our pricing. No other taxes will be charged to you during delivery!
Related Products
5zigen Miracle Fireball Muffler - Exhaust System - Toyota - Levin Trueno AE86
€2.042,40 €1.964,52
5zigen Pro Racer Headers - Toyota - 86 ZN6
€1.603,20 €1.425,12
ACL - Race Main Bearing Set For Toyota 3SGTE
€168,00 €159,60
ACL - Race Main Bearing Set For Toyota 4AGE/4AGZE
€150,00 €142,80
ACL - Race Rod Bearing Set For Toyota / Lexus 1/2/3UZ-FE
€262,80 €249,60
ACL - Race Rod Bearing Set For Toyota 3SGTE
€168,00 €159,60
ACL - Race Rod Bearing Set For Toyota 4AGE/4AGZE 16v/20v
€145,20 €138,00
ACL - Race Rod Bearings For Toyota 4U-GSE (86) 1998cc
€124,80 €118,80
ACL - Toyota 1JZ, 2JZ Standard Size Thrust Washers
€78,00 €74,40