2004

Sort by:
Sold Out
DBW 72mm billet Throttle Body - K20 K24 F20C F22C (DBW) - G09-05-0001
{"id":1555155189871,"title":"Grams Performance - DBW 72mm billet Throttle Body - Honda - K20 K24 F20C F22C (DBW)","handle":"dbw-72mm-billet-throttle-body-k20-k24-f20c-f22c-dbw-g09-05-0001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eReference Number: G09-05-0001\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003eThe new Grams 72mm Drive-By-Wire Electronic Throttle Body is the perfect upgrade from the factory 64mm Honda\/Acura throttle body; delivering a 50% increase in airflow. Each throttle body includes all new components including a CNC machined billet 6061-T6 aluminum housing with a precision-honed oversized bore, a high-torque servo motor, and a proprietary Non-Contact Hall Effect TPS sensor. To ensure the best performance, throttle response, and driveability, each TPS sensor is calibrated to meet the specific requirements of the vehicles engine management system. The Grams electronic throttle body is an ideal solution for both modified and stock engines with increased airflow demands.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003e\n50% Increase in Airflow Over Stock 64mm Throttle Body.\n\u003cbr\u003ePrecision Honed Oversized 72mm Bore with Tapered 80mm Entry.\n\u003cbr\u003eCNC Machined Billet 6061-T6 Aluminum Housing.\n\u003cbr\u003eAluminum Throttle Plate.\n\u003cbr\u003eFactory Programmable Non-Contact Hall Effect TPS.\n\u003cbr\u003eOptimized TPS Response Curve.\n\u003cbr\u003eHigh-Precision Servo Motor.\n\u003cbr\u003eThermal Gasket, Plug \u0026amp; Play Adapter Harness, and Hardware Included.\n\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003cbr\u003eAccord Wagon | CM2 | 2002-2005 | NA | K24A3 | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003cbr\u003eCivic | FN2 | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2018-09-14T13:44:24+08:00","created_at":"2018-09-14T13:44:25+08:00","vendor":"Grams Performance","type":"Throttle Bodies","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","accord-cl9-2002-2008-na-k24a3-i4","accord-wagon-cm2-2002-2005-na-k24a3-i4","civic-fg2-2007-2009-na-k20z3-i4","civic-fn2-2009-2012-na-k20a-i4","civic-type-r-euro-fn2r-2009-2012-na-k20a-i4","civic-type-r-fd2r-2007-2010-na-k20a-i4","grams-performance","honda","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","throttle-bodies","US1","ws18"],"price":51910,"price_min":51910,"price_max":51910,"available":false,"price_varies":false,"compare_at_price":65300,"compare_at_price_min":65300,"compare_at_price_max":65300,"compare_at_price_varies":false,"variants":[{"id":13822403805295,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G09-05-0001","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Grams Performance - DBW 72mm billet Throttle Body - Honda - K20 K24 F20C F22C (DBW)","public_title":null,"options":["Default Title"],"price":51910,"weight":1100,"compare_at_price":65300,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G09-05-0001.png?v=1684736531"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G09-05-0001.png?v=1684736531","options":["Title"],"media":[{"alt":"DBW 72mm billet Throttle Body - K20 K24 F20C F22C (DBW) - G09-05-0001","id":34069886697747,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G09-05-0001.png?v=1684736531"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G09-05-0001.png?v=1684736531","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eReference Number: G09-05-0001\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003eThe new Grams 72mm Drive-By-Wire Electronic Throttle Body is the perfect upgrade from the factory 64mm Honda\/Acura throttle body; delivering a 50% increase in airflow. Each throttle body includes all new components including a CNC machined billet 6061-T6 aluminum housing with a precision-honed oversized bore, a high-torque servo motor, and a proprietary Non-Contact Hall Effect TPS sensor. To ensure the best performance, throttle response, and driveability, each TPS sensor is calibrated to meet the specific requirements of the vehicles engine management system. The Grams electronic throttle body is an ideal solution for both modified and stock engines with increased airflow demands.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003e\n50% Increase in Airflow Over Stock 64mm Throttle Body.\n\u003cbr\u003ePrecision Honed Oversized 72mm Bore with Tapered 80mm Entry.\n\u003cbr\u003eCNC Machined Billet 6061-T6 Aluminum Housing.\n\u003cbr\u003eAluminum Throttle Plate.\n\u003cbr\u003eFactory Programmable Non-Contact Hall Effect TPS.\n\u003cbr\u003eOptimized TPS Response Curve.\n\u003cbr\u003eHigh-Precision Servo Motor.\n\u003cbr\u003eThermal Gasket, Plug \u0026amp; Play Adapter Harness, and Hardware Included.\n\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003cbr\u003eAccord Wagon | CM2 | 2002-2005 | NA | K24A3 | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003cbr\u003eCivic | FN2 | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}
DBW 72mm billet Throttle Body - K20 K24 F20C F22C (DBW) - G09-05-0001

Grams Performance - DBW 72mm billet Throttle Body - Honda - K20 K24 F20C F22C (DBW)

€519,10

Specifications:Manufacturer: Grams PerformanceReference Number: G09-05-0001Throttle Body Diameter: 72mmThe new Grams 72mm Drive-By-Wire Electronic Throttle Body is the perfect upgrade from the factory 64mm Honda/Acura throttle body; delivering a 50% increase in airflow. Each throttle body includes all new components including a CNC machined bill...


More Info
20% OFF
DBW Throttle Body To Ultra Race Series Intake Manifold - K20 K24 F20C F22C (DBW) - 309-05-0010
{"id":1555155976303,"title":"Skunk 2 - DBW Throttle Body To Ultra Race Series Intake Manifold - Honda - K20 K24 F20C F22C (DBW)","handle":"dbw-throttle-body-to-ultra-race-series-intake-manifold-k20-k24-f20c-f22c-dbw-309-05-0010","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 309-05-0010\u003cbr\u003eThrottle Body Diameter: \u003cbr\u003e\u003cbr\u003e\n\nSkunk2's all-new DBW throttle body adapter now offers '06-11 Honda Civic Type-R enthusiasts even more flexibility. Manufactured out of 6061-T6 billet aluminum '06-11 Honda Civic Type-R throttle body's can be bolted onto the new Ultra Race Series intake manifold.\n\nEnthusiasts now have a few options for throttle bodies. Each unique CNC-machined and hard-anodized throttle body adapter features 74mm opening recessed holes for easy adaptation and all necessary mounting hardware is included with each adapter making for an easy installation.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003cbr\u003eAccord Wagon | CM2 | 2002-2005 | NA | K24A3 | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003cbr\u003eCivic | FN2 | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2018-09-14T13:44:35+08:00","created_at":"2018-09-14T13:44:35+08:00","vendor":"Skunk 2","type":"Throttle Bodies","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","accord-cl9-2002-2008-na-k24a3-i4","accord-wagon-cm2-2002-2005-na-k24a3-i4","civic-fg2-2007-2009-na-k20z3-i4","civic-fn2-2009-2012-na-k20a-i4","civic-type-r-euro-fn2r-2009-2012-na-k20a-i4","civic-type-r-fd2r-2007-2010-na-k20a-i4","honda","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","skunk-2","throttle-bodies","throttle-body-adapter","US1","ws111"],"price":10510,"price_min":10510,"price_max":10510,"available":true,"price_varies":false,"compare_at_price":13300,"compare_at_price_min":13300,"compare_at_price_max":13300,"compare_at_price_varies":false,"variants":[{"id":13822408261743,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309-05-0010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk 2 - DBW Throttle Body To Ultra Race Series Intake Manifold - Honda - K20 K24 F20C F22C (DBW)","public_title":null,"options":["Default Title"],"price":10510,"weight":900,"compare_at_price":13300,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/309-05-0010.jpg?v=1684736547"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/309-05-0010.jpg?v=1684736547","options":["Title"],"media":[{"alt":"DBW Throttle Body To Ultra Race Series Intake Manifold - K20 K24 F20C F22C (DBW) - 309-05-0010","id":34069889089811,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/309-05-0010.jpg?v=1684736547"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/309-05-0010.jpg?v=1684736547","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 309-05-0010\u003cbr\u003eThrottle Body Diameter: \u003cbr\u003e\u003cbr\u003e\n\nSkunk2's all-new DBW throttle body adapter now offers '06-11 Honda Civic Type-R enthusiasts even more flexibility. Manufactured out of 6061-T6 billet aluminum '06-11 Honda Civic Type-R throttle body's can be bolted onto the new Ultra Race Series intake manifold.\n\nEnthusiasts now have a few options for throttle bodies. Each unique CNC-machined and hard-anodized throttle body adapter features 74mm opening recessed holes for easy adaptation and all necessary mounting hardware is included with each adapter making for an easy installation.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003cbr\u003eAccord Wagon | CM2 | 2002-2005 | NA | K24A3 | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003cbr\u003eCivic | FN2 | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}
DBW Throttle Body To Ultra Race Series Intake Manifold - K20 K24 F20C F22C (DBW) - 309-05-0010

Skunk 2 - DBW Throttle Body To Ultra Race Series Intake Manifold - Honda - K20 K24 F20C F22C (DBW)

€105,10

Specifications:Manufacturer: Skunk 2Reference Number: 309-05-0010Throttle Body Diameter: Skunk2's all-new DBW throttle body adapter now offers '06-11 Honda Civic Type-R enthusiasts even more flexibility. Manufactured out of 6061-T6 billet aluminum '06-11 Honda Civic Type-R throttle body's can be bolted onto the new Ultra Race Series intake man...


More Info
{"id":2206043373679,"title":"Spoon Rigid Collar Kit - Front - Honda Civic ES1\/ES3\/FG2","handle":"spoon-rigid-collar-kit-front-honda-civic-es1-es3-fg2-50261-fd2-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-FD2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | ES1 | 2000-2003 | NA | D15B | I4\u003cbr\u003eCivic Ferio | ES3 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:07:24+08:00","created_at":"2019-04-24T12:07:25+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","civic-ferio-es1-2000-2003-na-d15b-i4","civic-ferio-es3-2000-2003-na-d17a-i4","civic-fg2-2007-2009-na-k20z3-i4","collar-kits","ES1\/ES3\/FG2","front","honda","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638471913583,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-FD2-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Civic ES1\/ES3\/FG2","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f9b01b63-4fb9-43ad-a83a-3cc052e6bc14.jpg?v=1571709661"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f9b01b63-4fb9-43ad-a83a-3cc052e6bc14.jpg?v=1571709661","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Civic ES1\/ES3\/FG2 - 50261-FD2-000 - RZCrewEurope","id":1967726887023,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f9b01b63-4fb9-43ad-a83a-3cc052e6bc14.jpg?v=1571709661"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f9b01b63-4fb9-43ad-a83a-3cc052e6bc14.jpg?v=1571709661","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-FD2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | ES1 | 2000-2003 | NA | D15B | I4\u003cbr\u003eCivic Ferio | ES3 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e"}
Spoon Rigid Collar Kit - Front - Honda Civic ES1/ES3/FG2 - 50261-FD2-000 - RZCrewEurope

Spoon Rigid Collar Kit - Front - Honda Civic ES1/ES3/FG2

€266,40

Specifications:Manufacturer: SpoonPart Number: 50261-FD2-000Position: FrontNumber of Collars: RIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.The basic principle is one o...


More Info
{"id":2206043406447,"title":"Spoon Rigid Collar Kit - Rear - Honda Civic ES1\/ES3\/FG2","handle":"spoon-rigid-collar-kit-rear-honda-civic-es1-es3-fg2-50300-ep3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EP3-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | ES1 | 2000-2003 | NA | D15B | I4\u003cbr\u003eCivic Ferio | ES3 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:07:25+08:00","created_at":"2019-04-24T12:07:26+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","civic-ferio-es1-2000-2003-na-d15b-i4","civic-ferio-es3-2000-2003-na-d17a-i4","civic-fg2-2007-2009-na-k20z3-i4","collar-kits","ES1\/ES3\/FG2","honda","rear","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638472175727,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-EP3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Civic ES1\/ES3\/FG2","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c8562473-ed69-49a5-a028-e754f449c90d.jpg?v=1571709662"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c8562473-ed69-49a5-a028-e754f449c90d.jpg?v=1571709662","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Civic ES1\/ES3\/FG2 - 50300-EP3-000 - RZCrewEurope","id":1967726919791,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c8562473-ed69-49a5-a028-e754f449c90d.jpg?v=1571709662"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c8562473-ed69-49a5-a028-e754f449c90d.jpg?v=1571709662","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EP3-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | ES1 | 2000-2003 | NA | D15B | I4\u003cbr\u003eCivic Ferio | ES3 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e"}
Spoon Rigid Collar Kit - Rear - Honda Civic ES1/ES3/FG2 - 50300-EP3-000 - RZCrewEurope

Spoon Rigid Collar Kit - Rear - Honda Civic ES1/ES3/FG2

€266,40

Specifications:Manufacturer: SpoonPart Number: 50300-EP3-000Position: RearNumber of Collars: RIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.The basic principle is one of...


More Info