{"id":7007614074991,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline GT-R BNR34 (1999-2002)","handle":"hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-gt-r-bnr34-1999-2002-80300-an007","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eBCNR33\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 88(9)\u003cbr\u003e- Rear: 78(8)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200\u003cbr\u003e- Rear: 250\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±10 ( 1 )\u003cbr\u003e- Rear: ±10 ( 1 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 927\/260\u003cbr\u003e- Rear: 564\/324\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -20 ～ -89\u003cbr\u003e-- Rear: ～ -62\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -20 ～ -89\u003cbr\u003e-- Rear: ～ -62\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline GT-R - BNR34 (1999-2000) RB26DETT\u003cbr\u003eNissan - Skyline GT-R - BNR34 (2000-2000) RB26DETT\u003cbr\u003eNissan - Skyline GT-R - BNR34 (2000-2002) RB26DETT\u003c!--split--\u003e","published_at":"2022-06-08T14:39:16+08:00","created_at":"2022-06-08T14:39:17+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1999","2000","2001","2002","coilovers-and-springs","dampening-and-height-adjustable","hks","nissan","skyline-gt-r-bnr34-kouki-2000-2002-tt-rb26dett-i6","skyline-gt-r-bnr34-zenki-1999-2000-tt-rb26dett-i6","tva"],"price":257640,"price_min":257640,"price_max":257640,"available":true,"price_varies":false,"compare_at_price":299520,"compare_at_price_min":299520,"compare_at_price_max":299520,"compare_at_price_varies":false,"variants":[{"id":40856875958383,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AN007","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline GT-R BNR34 (1999-2002)","public_title":null,"options":["Default Title"],"price":257640,"weight":30000,"compare_at_price":299520,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_a6c58035-0b90-4108-9b6b-332f67b7d095.jpg?v=1654670357"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_a6c58035-0b90-4108-9b6b-332f67b7d095.jpg?v=1654670357","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline GT-R BNR34 (1999-2002) - 80300-AN007 - Rzcrewgarage","id":23495755300975,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_a6c58035-0b90-4108-9b6b-332f67b7d095.jpg?v=1654670357"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_a6c58035-0b90-4108-9b6b-332f67b7d095.jpg?v=1654670357","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eBCNR33\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 88(9)\u003cbr\u003e- Rear: 78(8)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200\u003cbr\u003e- Rear: 250\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±10 ( 1 )\u003cbr\u003e- Rear: ±10 ( 1 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 927\/260\u003cbr\u003e- Rear: 564\/324\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -20 ～ -89\u003cbr\u003e-- Rear: ～ -62\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -20 ～ -89\u003cbr\u003e-- Rear: ～ -62\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline GT-R - BNR34 (1999-2000) RB26DETT\u003cbr\u003eNissan - Skyline GT-R - BNR34 (2000-2000) RB26DETT\u003cbr\u003eNissan - Skyline GT-R - BNR34 (2000-2002) RB26DETT\u003c!--split--\u003e"}

{"id":7007614140527,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline Sedan KV36\/PV36\/V36 (2006-2018)","handle":"hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-sedan-kv36-pv36-v36-2006-2018-80300-an004","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eV36\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 88(9)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear: Special\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: -10 ( 1 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1015\/427\u003cbr\u003e- Rear: 584\/319\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: -5 ～ -60\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: - -5 ～ -60\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline Sedan - KV36 (2008-2018) VQ37VHR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2006-2007) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2007-2008) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2008-2018) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2006-2007) VQ25HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2007-2008) VQ25HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2008-2018) VQ25HR\u003c!--split--\u003e","published_at":"2022-06-08T14:39:19+08:00","created_at":"2022-06-08T14:39:20+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilovers-and-springs","dampening-and-height-adjustable","hks","nissan","skyline-sedan-kv36-kouki-2008-2018-na-vq37vhr-v6","skyline-sedan-pv36-chuki-2007-2008-na-vq35hr-v6","skyline-sedan-pv36-kouki-2008-2018-na-vq35hr-v6","skyline-sedan-pv36-zenki-2006-2007-na-vq35hr-v6","skyline-sedan-v36-chuki-2007-2008-na-vq25hr-v6","skyline-sedan-v36-kouki-2008-2018-na-vq25hr-v6","skyline-sedan-v36-zenki-2006-2007-na-vq25hr-v6","tva"],"price":277560,"price_min":277560,"price_max":277560,"available":true,"price_varies":false,"compare_at_price":322680,"compare_at_price_min":322680,"compare_at_price_max":322680,"compare_at_price_varies":false,"variants":[{"id":40856876023919,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AN004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline Sedan KV36\/PV36\/V36 (2006-2018)","public_title":null,"options":["Default Title"],"price":277560,"weight":30000,"compare_at_price":322680,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_2336d8c0-e4ec-472f-b850-ee5fb1a533ce.jpg?v=1654670360"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_2336d8c0-e4ec-472f-b850-ee5fb1a533ce.jpg?v=1654670360","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline Sedan KV36\/PV36\/V36 (2006-2018) - 80300-AN004 - Rzcrewgarage","id":23495755595887,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_2336d8c0-e4ec-472f-b850-ee5fb1a533ce.jpg?v=1654670360"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_2336d8c0-e4ec-472f-b850-ee5fb1a533ce.jpg?v=1654670360","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eV36\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 88(9)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear: Special\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: -10 ( 1 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1015\/427\u003cbr\u003e- Rear: 584\/319\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: -5 ～ -60\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: - -5 ～ -60\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline Sedan - KV36 (2008-2018) VQ37VHR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2006-2007) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2007-2008) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2008-2018) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2006-2007) VQ25HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2007-2008) VQ25HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2008-2018) VQ25HR\u003c!--split--\u003e"}

{"id":2122694131823,"title":"HKS - Exhaust Cam Pulley - Nissan - RB26DETT ( Non NVCS)","handle":"hks-exhaust-cam-pulley-nissan-rb26dett-non-nvcs-22004-an002-22004-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 22004-AN002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs cam duration and other engine specifications changes, the ideal valve timing point will also change. As both intake and exhaust cam duration increase, the overlap amounts can be adjusted for optimum performance. All HKS Camshafts come with recommended valve timing which can be achieved by using these sprockets in conjunction with HKS camshafts. These sprockets are compatible with standard camshafts. Sold Singularly!\n\n(Note: Please ensure that when using these sprockets, timing chain cover must be installed.)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB26DETT | 2600cc | DOHC | 24v | TT | I6\u003c!--split--\u003e","published_at":"2019-02-06T09:23:27+08:00","created_at":"2019-02-06T09:23:28+08:00","vendor":"HKS","type":"Build Your Head","tags":["build-your-head","cam-gears","exhaust","hks","jp1","nissan","rb26dett-2600cc-dohc-24v-tt-i6","ws17"],"price":17190,"price_min":17190,"price_max":17190,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":20015276916847,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"22004-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Exhaust Cam Pulley - Nissan - RB26DETT ( Non NVCS)","public_title":null,"options":["Default Title"],"price":17190,"weight":2000,"compare_at_price":19600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_Puleey_4dd5307f-8cc9-4d39-8afc-ab4eb30166bf.jpg?v=1747650360"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_Puleey_4dd5307f-8cc9-4d39-8afc-ab4eb30166bf.jpg?v=1747650360","options":["Title"],"media":[{"alt":"HKS - Exhaust Cam Pulley - Nissan - RB26DETT ( Non NVCS) - 22004-AN002 - 22004-AN002","id":41455616524563,"position":1,"preview_image":{"aspect_ratio":1.569,"height":255,"width":400,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_Puleey_4dd5307f-8cc9-4d39-8afc-ab4eb30166bf.jpg?v=1747650360"},"aspect_ratio":1.569,"height":255,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_Puleey_4dd5307f-8cc9-4d39-8afc-ab4eb30166bf.jpg?v=1747650360","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 22004-AN002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs cam duration and other engine specifications changes, the ideal valve timing point will also change. As both intake and exhaust cam duration increase, the overlap amounts can be adjusted for optimum performance. All HKS Camshafts come with recommended valve timing which can be achieved by using these sprockets in conjunction with HKS camshafts. These sprockets are compatible with standard camshafts. Sold Singularly!\n\n(Note: Please ensure that when using these sprockets, timing chain cover must be installed.)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB26DETT | 2600cc | DOHC | 24v | TT | I6\u003c!--split--\u003e"}

{"id":2122694033519,"title":"HKS - Exhaust Cam Pulley - Nissan - SR20DET ( RWD Only)","handle":"hks-exhaust-cam-pulley-nissan-sr20det-rwd-only-2203-rn010-2203-rn010","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 2203-RN010\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs cam duration and other engine specifications changes, the ideal valve timing point will also change. As both intake and exhaust cam duration increase, the overlap amounts can be adjusted for optimum performance. All HKS Camshafts come with recommended valve timing which can be achieved by using these sprockets in conjunction with HKS camshafts. These sprockets are compatible with standard camshafts. Sold Singularly!\n\n(Note: Please ensure that when using these sprockets, timing chain cover must be installed.)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSR20DET | 2000cc | DOHC | 16v | TC | I4\u003c!--split--\u003e","published_at":"2019-02-06T09:23:26+08:00","created_at":"2019-02-06T09:23:26+08:00","vendor":"HKS","type":"Build Your Head","tags":["build-your-head","cam-gears","exhaust","hks","jp1","nissan","sr20det-2000cc-dohc-16v-tc-i4","ws17"],"price":25640,"price_min":25640,"price_max":25640,"available":true,"price_varies":false,"compare_at_price":29800,"compare_at_price_min":29800,"compare_at_price_max":29800,"compare_at_price_varies":false,"variants":[{"id":20015276720239,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2203-RN010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Exhaust Cam Pulley - Nissan - SR20DET ( RWD Only)","public_title":null,"options":["Default Title"],"price":25640,"weight":2000,"compare_at_price":29800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_Puleey_3227ecc3-ee9c-4198-a2fa-f402b132f9b1.jpg?v=1747650356"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_Puleey_3227ecc3-ee9c-4198-a2fa-f402b132f9b1.jpg?v=1747650356","options":["Title"],"media":[{"alt":"HKS - Exhaust Cam Pulley - Nissan - SR20DET ( RWD Only) - 2203-RN010 - 2203-RN010","id":41455616065811,"position":1,"preview_image":{"aspect_ratio":1.569,"height":255,"width":400,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_Puleey_3227ecc3-ee9c-4198-a2fa-f402b132f9b1.jpg?v=1747650356"},"aspect_ratio":1.569,"height":255,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_Puleey_3227ecc3-ee9c-4198-a2fa-f402b132f9b1.jpg?v=1747650356","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 2203-RN010\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs cam duration and other engine specifications changes, the ideal valve timing point will also change. As both intake and exhaust cam duration increase, the overlap amounts can be adjusted for optimum performance. All HKS Camshafts come with recommended valve timing which can be achieved by using these sprockets in conjunction with HKS camshafts. These sprockets are compatible with standard camshafts. Sold Singularly!\n\n(Note: Please ensure that when using these sprockets, timing chain cover must be installed.)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSR20DET | 2000cc | DOHC | 16v | TC | I4\u003c!--split--\u003e"}

{"id":2122696032367,"title":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Cefiro A31 - 88\/09 - 94\/07 )","handle":"hks-fine-tune-timing-belt-nissan-rb20det-cefiro-a31-88-09-94-07-24999-an001-24999-an001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB20DET | 2000cc | DOHC | 24v | TC | I6\u003c!--split--\u003e","published_at":"2019-02-06T09:24:04+08:00","created_at":"2019-02-06T09:24:04+08:00","vendor":"HKS","type":"Build Your Head","tags":["build-your-head","hks","jp1","nissan","rb20det-2000cc-dohc-24v-tc-i6","timing-belts-and-chains","ws17"],"price":15020,"price_min":15020,"price_max":15020,"available":true,"price_varies":false,"compare_at_price":17400,"compare_at_price_min":17400,"compare_at_price_max":17400,"compare_at_price_varies":false,"variants":[{"id":20015281209455,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"24999-AN001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Cefiro A31 - 88\/09 - 94\/07 )","public_title":null,"options":["Default Title"],"price":15020,"weight":1200,"compare_at_price":17400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_e4f51866-6fd1-4a19-94b1-03d0e5f08f9f.jpg?v=1747650457"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_e4f51866-6fd1-4a19-94b1-03d0e5f08f9f.jpg?v=1747650457","options":["Title"],"media":[{"alt":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Cefiro A31 - 88\/09 - 94\/07 ) - 24999-AN001 - 24999-AN001","id":41455623242003,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_e4f51866-6fd1-4a19-94b1-03d0e5f08f9f.jpg?v=1747650457"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_e4f51866-6fd1-4a19-94b1-03d0e5f08f9f.jpg?v=1747650457","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB20DET | 2000cc | DOHC | 24v | TC | I6\u003c!--split--\u003e"}

{"id":2122696065135,"title":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Cefiro A31 - 88\/09 - 94\/07 For sports driving (reinforced type))","handle":"hks-fine-tune-timing-belt-nissan-rb20det-cefiro-a31-88-09-94-07-for-sports-driving-reinforced-type-24999-an002-24999-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB20DET | 2000cc | DOHC | 24v | TC | I6\u003c!--split--\u003e","published_at":"2019-02-06T09:24:05+08:00","created_at":"2019-02-06T09:24:05+08:00","vendor":"HKS","type":"Build Your Head","tags":["build-your-head","hks","jp1","nissan","rb20det-2000cc-dohc-24v-tc-i6","timing-belts-and-chains","ws17"],"price":16850,"price_min":16850,"price_max":16850,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":20015281242223,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"24999-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Cefiro A31 - 88\/09 - 94\/07 For sports driving (reinforced type))","public_title":null,"options":["Default Title"],"price":16850,"weight":1200,"compare_at_price":19600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_d60b0e31-c5f2-45c6-9560-1cfd2c9c0edf.jpg?v=1747650459"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_d60b0e31-c5f2-45c6-9560-1cfd2c9c0edf.jpg?v=1747650459","options":["Title"],"media":[{"alt":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Cefiro A31 - 88\/09 - 94\/07 For sports driving (reinforced type)) - 24999-AN002 - 24999-AN002","id":41455623405843,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_d60b0e31-c5f2-45c6-9560-1cfd2c9c0edf.jpg?v=1747650459"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_d60b0e31-c5f2-45c6-9560-1cfd2c9c0edf.jpg?v=1747650459","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB20DET | 2000cc | DOHC | 24v | TC | I6\u003c!--split--\u003e"}

{"id":2122696097903,"title":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Laurel C33 - 89 \/ 01-93 \/ 01 )","handle":"hks-fine-tune-timing-belt-nissan-rb20det-laurel-c33-89-01-93-01-24999-an001-24999-an001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB20DET | 2000cc | DOHC | 24v | TC | I6\u003c!--split--\u003e","published_at":"2019-02-06T09:24:05+08:00","created_at":"2019-02-06T09:24:06+08:00","vendor":"HKS","type":"Build Your Head","tags":["build-your-head","hks","jp1","nissan","rb20det-2000cc-dohc-24v-tc-i6","timing-belts-and-chains","ws17"],"price":15020,"price_min":15020,"price_max":15020,"available":true,"price_varies":false,"compare_at_price":17400,"compare_at_price_min":17400,"compare_at_price_max":17400,"compare_at_price_varies":false,"variants":[{"id":20015281274991,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"24999-AN001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Laurel C33 - 89 \/ 01-93 \/ 01 )","public_title":null,"options":["Default Title"],"price":15020,"weight":1200,"compare_at_price":17400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_19c5cf73-d794-49db-8ef4-ee23eed12793.jpg?v=1747650461"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_19c5cf73-d794-49db-8ef4-ee23eed12793.jpg?v=1747650461","options":["Title"],"media":[{"alt":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Laurel C33 - 89 \/ 01-93 \/ 01 ) - 24999-AN001 - 24999-AN001","id":41455623700755,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_19c5cf73-d794-49db-8ef4-ee23eed12793.jpg?v=1747650461"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_19c5cf73-d794-49db-8ef4-ee23eed12793.jpg?v=1747650461","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB20DET | 2000cc | DOHC | 24v | TC | I6\u003c!--split--\u003e"}

{"id":2122696130671,"title":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Laurel C33 - 89 \/ 01-93 \/ 01 For sports driving (reinforced type))","handle":"hks-fine-tune-timing-belt-nissan-rb20det-laurel-c33-89-01-93-01-for-sports-driving-reinforced-type-24999-an002-24999-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB20DET | 2000cc | DOHC | 24v | TC | I6\u003c!--split--\u003e","published_at":"2019-02-06T09:24:06+08:00","created_at":"2019-02-06T09:24:07+08:00","vendor":"HKS","type":"Build Your Head","tags":["build-your-head","hks","jp1","nissan","rb20det-2000cc-dohc-24v-tc-i6","timing-belts-and-chains","ws17"],"price":16850,"price_min":16850,"price_max":16850,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":20015281307759,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"24999-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Laurel C33 - 89 \/ 01-93 \/ 01 For sports driving (reinforced type))","public_title":null,"options":["Default Title"],"price":16850,"weight":1200,"compare_at_price":19600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_2f89a059-d0fe-415f-bed9-f5cded7b491f.jpg?v=1747650463"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_2f89a059-d0fe-415f-bed9-f5cded7b491f.jpg?v=1747650463","options":["Title"],"media":[{"alt":"HKS - Fine Tune Timing Belt - Nissan - RB20DET ( Laurel C33 - 89 \/ 01-93 \/ 01 For sports driving (reinforced type)) - 24999-AN002 - 24999-AN002","id":41455623930131,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_2f89a059-d0fe-415f-bed9-f5cded7b491f.jpg?v=1747650463"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_2f89a059-d0fe-415f-bed9-f5cded7b491f.jpg?v=1747650463","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB20DET | 2000cc | DOHC | 24v | TC | I6\u003c!--split--\u003e"}

{"id":2122695835759,"title":"HKS - Fine Tune Timing Belt - Nissan - RB25DET ( Skyline HCR 32 · ECR 33 · ER 34 - 89 \/ 05-01 \/ 05 )","handle":"hks-fine-tune-timing-belt-nissan-rb25det-skyline-hcr-32-ecr-33-er-34-89-05-01-05-24999-an001-24999-an001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB25DET | 2500cc | DOHC | 24v | TC | I6\u003c!--split--\u003e","published_at":"2019-02-06T09:24:00+08:00","created_at":"2019-02-06T09:24:00+08:00","vendor":"HKS","type":"Build Your Head","tags":["build-your-head","hks","jp1","nissan","rb25det-2500cc-dohc-24v-tc-i6","timing-belts-and-chains","ws17"],"price":15020,"price_min":15020,"price_max":15020,"available":true,"price_varies":false,"compare_at_price":17400,"compare_at_price_min":17400,"compare_at_price_max":17400,"compare_at_price_varies":false,"variants":[{"id":20015280685167,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"24999-AN001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Fine Tune Timing Belt - Nissan - RB25DET ( Skyline HCR 32 · ECR 33 · ER 34 - 89 \/ 05-01 \/ 05 )","public_title":null,"options":["Default Title"],"price":15020,"weight":1200,"compare_at_price":17400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_3e425e3a-c2f8-4aed-8c74-cb625cda571b.jpg?v=1747650447"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_3e425e3a-c2f8-4aed-8c74-cb625cda571b.jpg?v=1747650447","options":["Title"],"media":[{"alt":"HKS - Fine Tune Timing Belt - Nissan - RB25DET ( Skyline HCR 32 · ECR 33 · ER 34 - 89 \/ 05-01 \/ 05 ) - 24999-AN001 - 24999-AN001","id":41455622488339,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_3e425e3a-c2f8-4aed-8c74-cb625cda571b.jpg?v=1747650447"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_3e425e3a-c2f8-4aed-8c74-cb625cda571b.jpg?v=1747650447","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB25DET | 2500cc | DOHC | 24v | TC | I6\u003c!--split--\u003e"}

{"id":2122695868527,"title":"HKS - Fine Tune Timing Belt - Nissan - RB25DET ( Skyline HCR 32 · ECR 33 · ER 34 - 89 \/ 05-01 \/ 05 For sports driving (reinforced type))","handle":"hks-fine-tune-timing-belt-nissan-rb25det-skyline-hcr-32-ecr-33-er-34-89-05-01-05-for-sports-driving-reinforced-type-24999-an002-24999-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB25DET | 2500cc | DOHC | 24v | TC | I6\u003c!--split--\u003e","published_at":"2019-02-06T09:24:01+08:00","created_at":"2019-02-06T09:24:01+08:00","vendor":"HKS","type":"Build Your Head","tags":["build-your-head","hks","jp1","nissan","rb25det-2500cc-dohc-24v-tc-i6","timing-belts-and-chains","ws17"],"price":16850,"price_min":16850,"price_max":16850,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":20015280717935,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"24999-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Fine Tune Timing Belt - Nissan - RB25DET ( Skyline HCR 32 · ECR 33 · ER 34 - 89 \/ 05-01 \/ 05 For sports driving (reinforced type))","public_title":null,"options":["Default Title"],"price":16850,"weight":1200,"compare_at_price":19600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_14af6995-bf62-4d2e-a7af-871a0dd25a4a.jpg?v=1747650450"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_14af6995-bf62-4d2e-a7af-871a0dd25a4a.jpg?v=1747650450","options":["Title"],"media":[{"alt":"HKS - Fine Tune Timing Belt - Nissan - RB25DET ( Skyline HCR 32 · ECR 33 · ER 34 - 89 \/ 05-01 \/ 05 For sports driving (reinforced type)) - 24999-AN002 - 24999-AN002","id":41455622684947,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_14af6995-bf62-4d2e-a7af-871a0dd25a4a.jpg?v=1747650450"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_14af6995-bf62-4d2e-a7af-871a0dd25a4a.jpg?v=1747650450","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB25DET | 2500cc | DOHC | 24v | TC | I6\u003c!--split--\u003e"}

{"id":2122695966831,"title":"HKS - Fine Tune Timing Belt - Nissan - RB26DETT ( Skyline GT-R BNR 32, BCNR 33, BNR 34 - 89 \/ 08-02 \/ 08 )","handle":"hks-fine-tune-timing-belt-nissan-rb26dett-skyline-gt-r-bnr-32-bcnr-33-bnr-34-89-08-02-08-24999-an001-24999-an001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB26DETT | 2600cc | DOHC | 24v | TT | I6\u003c!--split--\u003e","published_at":"2019-02-06T09:24:02+08:00","created_at":"2019-02-06T09:24:02+08:00","vendor":"HKS","type":"Build Your Head","tags":["build-your-head","hks","jp1","nissan","rb26dett-2600cc-dohc-24v-tt-i6","timing-belts-and-chains","ws17"],"price":15020,"price_min":15020,"price_max":15020,"available":true,"price_varies":false,"compare_at_price":17400,"compare_at_price_min":17400,"compare_at_price_max":17400,"compare_at_price_varies":false,"variants":[{"id":20015281143919,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"24999-AN001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Fine Tune Timing Belt - Nissan - RB26DETT ( Skyline GT-R BNR 32, BCNR 33, BNR 34 - 89 \/ 08-02 \/ 08 )","public_title":null,"options":["Default Title"],"price":15020,"weight":1200,"compare_at_price":17400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_763c8202-222f-4d0b-af45-3760e41faeec.jpg?v=1747650452"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_763c8202-222f-4d0b-af45-3760e41faeec.jpg?v=1747650452","options":["Title"],"media":[{"alt":"HKS - Fine Tune Timing Belt - Nissan - RB26DETT ( Skyline GT-R BNR 32, BCNR 33, BNR 34 - 89 \/ 08-02 \/ 08 ) - 24999-AN001 - 24999-AN001","id":41455622848787,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_763c8202-222f-4d0b-af45-3760e41faeec.jpg?v=1747650452"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_763c8202-222f-4d0b-af45-3760e41faeec.jpg?v=1747650452","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB26DETT | 2600cc | DOHC | 24v | TT | I6\u003c!--split--\u003e"}

{"id":2122695999599,"title":"HKS - Fine Tune Timing Belt - Nissan - RB26DETT ( Skyline GT-R BNR 32, BCNR 33, BNR 34 - 89 \/ 08-02 \/ 08 For sports driving (reinforced type))","handle":"hks-fine-tune-timing-belt-nissan-rb26dett-skyline-gt-r-bnr-32-bcnr-33-bnr-34-89-08-02-08-for-sports-driving-reinforced-type-24999-an002-24999-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB26DETT | 2600cc | DOHC | 24v | TT | I6\u003c!--split--\u003e","published_at":"2019-02-06T09:24:03+08:00","created_at":"2019-02-06T09:24:03+08:00","vendor":"HKS","type":"Build Your Head","tags":["build-your-head","hks","jp1","nissan","rb26dett-2600cc-dohc-24v-tt-i6","timing-belts-and-chains","ws17"],"price":16850,"price_min":16850,"price_max":16850,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":20015281176687,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"24999-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Fine Tune Timing Belt - Nissan - RB26DETT ( Skyline GT-R BNR 32, BCNR 33, BNR 34 - 89 \/ 08-02 \/ 08 For sports driving (reinforced type))","public_title":null,"options":["Default Title"],"price":16850,"weight":1200,"compare_at_price":19600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_1684104a-2383-4f27-99f3-d4f55f7af67b.jpg?v=1747650454"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_1684104a-2383-4f27-99f3-d4f55f7af67b.jpg?v=1747650454","options":["Title"],"media":[{"alt":"HKS - Fine Tune Timing Belt - Nissan - RB26DETT ( Skyline GT-R BNR 32, BCNR 33, BNR 34 - 89 \/ 08-02 \/ 08 For sports driving (reinforced type)) - 24999-AN002 - 24999-AN002","id":41455623045395,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_1684104a-2383-4f27-99f3-d4f55f7af67b.jpg?v=1747650454"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Fine_Tuning_Timing_belt_1684104a-2383-4f27-99f3-d4f55f7af67b.jpg?v=1747650454","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 24999-AN002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBelt strength has been optimized for each engine application and designed to allow stable belt tension even when heat expansion occurs in the engine\nPrevious timing belt manufacturing techniques have involved with applying pressure from the outside to the teeth. This applies tension to teeth making them weaker. By forming a mould with the correct shape of teeth to begin with, it allows the teeth shape to be formed without compromising belt strength and can decrease the belt skipping at high torque engine.\nTeeth rubber is made from H-NBR grade rubber for additional strength.\u003cbr\u003eReplace OEM Parts reference: 13028-20P25\u003cbr\u003eSpecial Notes: 141 YS 25.4\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB26DETT | 2600cc | DOHC | 24v | TT | I6\u003c!--split--\u003e"}

{"id":8648555888915,"title":"HKS - Floor Mat Front Set - Nissan - Skyline GT-R BCNR33","handle":"hks-floor-mat-front-set-nissan-skyline-gt-r-bcnr33-51007-ak373","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 51007-AK373\u003cbr\u003e\u003cbr\u003eFull set of 2 Front Mats for your Nissan Skyline GT-R BCNR33. ( Ony for RHD Vehicles)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BCNR33 Zenki | 1995-1996 | TT | RB26DETT | I6,Skyline GT-R | BCNR33 Chuki | 1996-1997 | TT | RB26DETT | I6,Skyline GT-R | BCNR33 Kouki | 1997-1998 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-08-22T17:44:41+08:00","created_at":"2023-08-22T17:44:42+08:00","vendor":"HKS","type":"Carpet","tags":["1995","1996","1997","1998","BCNR33","Carpet","hks","JP1","nissan","skyline-gt-r-bcnr33-chuki-1996-1997-tt-rb26dett-i6","skyline-gt-r-bcnr33-kouki-1997-1998-tt-rb26dett-i6","skyline-gt-r-bcnr33-zenki-1995-1996-tt-rb26dett-i6","ws11"],"price":20950,"price_min":20950,"price_max":20950,"available":true,"price_varies":false,"compare_at_price":23000,"compare_at_price_min":23000,"compare_at_price_max":23000,"compare_at_price_varies":false,"variants":[{"id":46650007355667,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"51007-AK373","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Floor Mat Front Set - Nissan - Skyline GT-R BCNR33","public_title":null,"options":["Default Title"],"price":20950,"weight":5200,"compare_at_price":23000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK373_f2df124b-28a5-47ea-a618-7e37bac13e57.jpg?v=1738746378"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK373_f2df124b-28a5-47ea-a618-7e37bac13e57.jpg?v=1738746378","options":["Title"],"media":[{"alt":"HKS - Floor Mat Front Set - Nissan - Skyline GT-R BCNR33 - 51007-AK373","id":40584128856339,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK373_f2df124b-28a5-47ea-a618-7e37bac13e57.jpg?v=1738746378"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK373_f2df124b-28a5-47ea-a618-7e37bac13e57.jpg?v=1738746378","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 51007-AK373\u003cbr\u003e\u003cbr\u003eFull set of 2 Front Mats for your Nissan Skyline GT-R BCNR33. ( Ony for RHD Vehicles)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BCNR33 Zenki | 1995-1996 | TT | RB26DETT | I6,Skyline GT-R | BCNR33 Chuki | 1996-1997 | TT | RB26DETT | I6,Skyline GT-R | BCNR33 Kouki | 1997-1998 | TT | RB26DETT | I6\u003c!--split--\u003e"}

{"id":8648555528467,"title":"HKS - Floor Mat Front Set - Nissan - Skyline GT-R BNR32","handle":"hks-floor-mat-front-set-nissan-skyline-gt-r-bnr32-51007-ak372","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 51007-AK372\u003cbr\u003e\u003cbr\u003eFull set of 2 Front Mats for your Nissan Skyline GT-R BNR32. ( Ony for RHD Vehicles)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6,Skyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6,Skyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-08-22T17:44:40+08:00","created_at":"2023-08-22T17:44:41+08:00","vendor":"HKS","type":"Carpet","tags":["1989","1990","1991","1992","1993","1994","BNR32","Carpet","hks","JP1","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws11"],"price":20950,"price_min":20950,"price_max":20950,"available":true,"price_varies":false,"compare_at_price":23000,"compare_at_price_min":23000,"compare_at_price_max":23000,"compare_at_price_varies":false,"variants":[{"id":46650005422355,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"51007-AK372","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Floor Mat Front Set - Nissan - Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":20950,"weight":5200,"compare_at_price":23000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK372_d798c26c-442d-4c3d-8b95-df09df6b29ea.jpg?v=1738746376"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK372_d798c26c-442d-4c3d-8b95-df09df6b29ea.jpg?v=1738746376","options":["Title"],"media":[{"alt":"HKS - Floor Mat Front Set - Nissan - Skyline GT-R BNR32 - 51007-AK372","id":40584128790803,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK372_d798c26c-442d-4c3d-8b95-df09df6b29ea.jpg?v=1738746376"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK372_d798c26c-442d-4c3d-8b95-df09df6b29ea.jpg?v=1738746376","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 51007-AK372\u003cbr\u003e\u003cbr\u003eFull set of 2 Front Mats for your Nissan Skyline GT-R BNR32. ( Ony for RHD Vehicles)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6,Skyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6,Skyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}

{"id":8648556314899,"title":"HKS - Floor Mat Front Set - Nissan - Skyline GT-R BNR34","handle":"hks-floor-mat-front-set-nissan-skyline-gt-r-bnr34-51007-ak374","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 51007-AK374\u003cbr\u003e\u003cbr\u003eFull set of 2 Front Mats for your Nissan Skyline GT-R BNR34. ( Ony for RHD Vehicles)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR34 Zenki | 1999-2000 | TT | RB26DETT | I6,Skyline GT-R | BNR34 Kouki | 2000-2002 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2023-08-22T17:44:43+08:00","created_at":"2023-08-22T17:44:45+08:00","vendor":"HKS","type":"Carpet","tags":["1999","2000","2001","2002","BNR34","Carpet","hks","JP1","nissan","skyline-gt-r-bnr34-kouki-2000-2002-tt-rb26dett-i6","skyline-gt-r-bnr34-zenki-1999-2000-tt-rb26dett-i6","ws11"],"price":20950,"price_min":20950,"price_max":20950,"available":true,"price_varies":false,"compare_at_price":23000,"compare_at_price_min":23000,"compare_at_price_max":23000,"compare_at_price_varies":false,"variants":[{"id":46650009288979,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"51007-AK374","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Floor Mat Front Set - Nissan - Skyline GT-R BNR34","public_title":null,"options":["Default Title"],"price":20950,"weight":5200,"compare_at_price":23000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK374_15661f76-d366-4232-9943-aa35324f7930.jpg?v=1738746380"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK374_15661f76-d366-4232-9943-aa35324f7930.jpg?v=1738746380","options":["Title"],"media":[{"alt":"HKS - Floor Mat Front Set - Nissan - Skyline GT-R BNR34 - 51007-AK374","id":40584128921875,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK374_15661f76-d366-4232-9943-aa35324f7930.jpg?v=1738746380"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_MAT_51007-AK374_15661f76-d366-4232-9943-aa35324f7930.jpg?v=1738746380","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 51007-AK374\u003cbr\u003e\u003cbr\u003eFull set of 2 Front Mats for your Nissan Skyline GT-R BNR34. ( Ony for RHD Vehicles)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR34 Zenki | 1999-2000 | TT | RB26DETT | I6,Skyline GT-R | BNR34 Kouki | 2000-2002 | TT | RB26DETT | I6\u003c!--split--\u003e"}

{"id":8162832318739,"title":"HKS - Fuel Delivery Kit - Nissan RB26DETT","handle":"hks-fuel-delivery-kit-nissan-rb26dett-1407-rt004","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 1407-RT004\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003e\nHole Diameter (mm): 11.0\u003cbr\u003e\u003cbr\u003e\n\nCOMPATIBILITY NOTES:\u003cbr\u003e\n- Only for Turbo Vehicles\u003cbr\u003e\n- Not compatible with VVT-i vehicles\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB26DETT | 2600cc | DOHC | 24v | TT | I6\u003c!--split--\u003e","published_at":"2023-03-07T16:59:53+08:00","created_at":"2023-03-07T16:59:54+08:00","vendor":"HKS","type":"Fuel Rail","tags":["fuel-rail","hks","jp1","nissan","RB26DETT","rb26dett-2600cc-dohc-24v-tt-i6","ws16"],"price":29310,"price_min":29310,"price_max":29310,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":44566140682515,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1407-RT004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Fuel Delivery Kit - Nissan RB26DETT","public_title":null,"options":["Default Title"],"price":29310,"weight":2000,"compare_at_price":34100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/1407-RT004_97fc8c52-12b9-43c0-a5d7-304879c2b2d5.jpg?v=1747650551"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/1407-RT004_97fc8c52-12b9-43c0-a5d7-304879c2b2d5.jpg?v=1747650551","options":["Title"],"media":[{"alt":"HKS - Fuel Delivery Kit - Nissan RB26DETT - 1407-RT004","id":41455629861139,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/1407-RT004_97fc8c52-12b9-43c0-a5d7-304879c2b2d5.jpg?v=1747650551"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/1407-RT004_97fc8c52-12b9-43c0-a5d7-304879c2b2d5.jpg?v=1747650551","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 1407-RT004\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003e\nHole Diameter (mm): 11.0\u003cbr\u003e\u003cbr\u003e\n\nCOMPATIBILITY NOTES:\u003cbr\u003e\n- Only for Turbo Vehicles\u003cbr\u003e\n- Not compatible with VVT-i vehicles\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB26DETT | 2600cc | DOHC | 24v | TT | I6\u003c!--split--\u003e"}

{"id":8816160473363,"title":"HKS - Fuel delivery kit - Nissan RB26DETT","handle":"hks-fuel-delivery-kit-nissan-rb26dett-1407-rn003","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 1407-RN003\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\nHole Diameter (mm): 11.0\u003cbr\u003e\u003cbr\u003e\n\nPRODUCT NOTES:\n- Additional Fuel Regulator (Part Num. 1407-RA015) is required, sold separately\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB26DETT | 2600cc | DOHC | 24v | TT | I6\u003c!--split--\u003e","published_at":"2023-09-29T13:19:22+08:00","created_at":"2023-09-29T13:19:23+08:00","vendor":"HKS","type":"Fuel Rail","tags":["fuel-pressure-regulator","fuel-rail","hks","jp1","nissan","rb26dett-2600cc-dohc-24v-tt-i6","ws16"],"price":32950,"price_min":32950,"price_max":32950,"available":true,"price_varies":false,"compare_at_price":38000,"compare_at_price_min":38000,"compare_at_price_max":38000,"compare_at_price_varies":false,"variants":[{"id":47114123936019,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1407-RN003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Fuel delivery kit - Nissan RB26DETT","public_title":null,"options":["Default Title"],"price":32950,"weight":3000,"compare_at_price":38000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/1407-RN003_836664c4-c910-46b8-b7bd-5c4b5ca529eb.jpg?v=1747650547"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/1407-RN003_836664c4-c910-46b8-b7bd-5c4b5ca529eb.jpg?v=1747650547","options":["Title"],"media":[{"alt":"HKS - Fuel delivery kit - Nissan RB26DETT - 1407-RN003","id":41455629730067,"position":1,"preview_image":{"aspect_ratio":1.171,"height":392,"width":459,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/1407-RN003_836664c4-c910-46b8-b7bd-5c4b5ca529eb.jpg?v=1747650547"},"aspect_ratio":1.171,"height":392,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/1407-RN003_836664c4-c910-46b8-b7bd-5c4b5ca529eb.jpg?v=1747650547","width":459}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 1407-RN003\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\nHole Diameter (mm): 11.0\u003cbr\u003e\u003cbr\u003e\n\nPRODUCT NOTES:\n- Additional Fuel Regulator (Part Num. 1407-RA015) is required, sold separately\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRB26DETT | 2600cc | DOHC | 24v | TT | I6\u003c!--split--\u003e"}

{"id":1483843436655,"title":"HKS - High Flow Surge Tank Manifold - Nissan - GT-R R35","handle":"hks-high-flow-surge-tank-manifold-nissan-gt-r-r35-13008-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 13008-AN002\u003cbr\u003eIntake Type: Intake Manifolds\u003cbr\u003e\u003cbr\u003eAlso known as an 'intake plenum', the HKS High flow Surge Tank comes with increased the volume capacity and design to have better distribution of airflow through the ports. With a larger runners and a significant increase on the collector tanks along with refined internals for better airflow, the item is an excellent upgrade for tuned VR38 engines. This Intake is a bolt on replacement to the Oem part. It will fit with the stock Thottle bodies!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e","published_at":"2018-09-02T20:39:38+08:00","created_at":"2018-09-02T20:39:40+08:00","vendor":"HKS","type":"Intake Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","hks","intake-manifolds","JP1","nissan","ws120"],"price":286350,"price_min":286350,"price_max":286350,"available":true,"price_varies":false,"compare_at_price":364900,"compare_at_price_min":364900,"compare_at_price_max":364900,"compare_at_price_varies":false,"variants":[{"id":13229003210863,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"13008-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - High Flow Surge Tank Manifold - Nissan - GT-R R35","public_title":null,"options":["Default Title"],"price":286350,"weight":12000,"compare_at_price":364900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/13008-AN002_d95f435e-bf80-47a0-b08d-0d22daeb4214.jpg?v=1684739213"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/13008-AN002_d95f435e-bf80-47a0-b08d-0d22daeb4214.jpg?v=1684739213","options":["Title"],"media":[{"alt":"HKS - High Flow Surge Tank Manifold - Nissan - GT-R R35 - 13008-AN002","id":34070309110035,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1275,"width":1700,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/13008-AN002_d95f435e-bf80-47a0-b08d-0d22daeb4214.jpg?v=1684739213"},"aspect_ratio":1.333,"height":1275,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/13008-AN002_d95f435e-bf80-47a0-b08d-0d22daeb4214.jpg?v=1684739213","width":1700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 13008-AN002\u003cbr\u003eIntake Type: Intake Manifolds\u003cbr\u003e\u003cbr\u003eAlso known as an 'intake plenum', the HKS High flow Surge Tank comes with increased the volume capacity and design to have better distribution of airflow through the ports. With a larger runners and a significant increase on the collector tanks along with refined internals for better airflow, the item is an excellent upgrade for tuned VR38 engines. This Intake is a bolt on replacement to the Oem part. It will fit with the stock Thottle bodies!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e"}

{"id":2125313212527,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Fairlady Z HZ33","handle":"hks-hipermax-iv-gt-coilovers-nissan-fairlady-z-hz33-80230-an010","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN010\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear different type. * Vehicle height data of Z33.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003chr\u003eRear different type. * Vehicle height data of Z33.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:55+08:00","created_at":"2019-02-08T13:06:55+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","fairlady-z-roadster-hz33-chuki-aft-fl-2005-2007-na-vq35hr-v6","fairlady-z-roadster-hz33-chuki-pre-fl-2004-2005-na-vq35hr-v6","fairlady-z-roadster-hz33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-roadster-hz33-zenki-2003-2004-na-vq35hr-v6","hks","hks30","nissan"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025496141935,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Fairlady Z HZ33","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8bee909a-9d46-4675-8a27-1cfb740c90a7.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8bee909a-9d46-4675-8a27-1cfb740c90a7.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Fairlady Z HZ33 - 80230-AN010 - RZCrewGarage","id":1850809286767,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8bee909a-9d46-4675-8a27-1cfb740c90a7.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8bee909a-9d46-4675-8a27-1cfb740c90a7.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN010\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear different type. * Vehicle height data of Z33.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003chr\u003eRear different type. * Vehicle height data of Z33.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125313310831,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Fairlady Z Z33","handle":"hks-hipermax-iv-gt-coilovers-nissan-fairlady-z-z33-80230-an010","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN010\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear different type.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003chr\u003eRear different type.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:56+08:00","created_at":"2019-02-08T13:06:57+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2002","2003","2004","2005","2006","2007","2008","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","fairlady-z-z33-chuki-2004-2005-na-vq35de-v6","fairlady-z-z33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-z33-zenki-2002-2004-na-vq35de-v6","hks","hks30","nissan"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025496830063,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Fairlady Z Z33","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2e3083fa-3ec1-4a48-91f2-cccaa0f2d7a0.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2e3083fa-3ec1-4a48-91f2-cccaa0f2d7a0.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Fairlady Z Z33 - 80230-AN010 - RZCrewGarage","id":1850809385071,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2e3083fa-3ec1-4a48-91f2-cccaa0f2d7a0.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2e3083fa-3ec1-4a48-91f2-cccaa0f2d7a0.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN010\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear different type.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003chr\u003eRear different type.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125313245295,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Fairlady Z Z34","handle":"hks-hipermax-iv-gt-coilovers-nissan-fairlady-z-z34-80230-an009","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -21mm (Max Adjustment: 0 ~ -34\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 106.9Nm\u003cbr\u003eCompression Setting: 26.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -62\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 4.51Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Version NISMO Compatibility not confirmed. Rear:Separate type.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -21mm (Max Adjustment: 0 ~ -34\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 106.9Nm\u003cbr\u003eCompression Setting: 26.5Nm\u003chr\u003eVersion NISMO Compatibility not confirmed. Rear:Separate type.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -62\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 4.51Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:55+08:00","created_at":"2019-02-08T13:06:56+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","hks","hks30","nissan"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025496567919,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Fairlady Z Z34","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_fae0f657-33f2-41e3-b50e-2504fb38bc49.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_fae0f657-33f2-41e3-b50e-2504fb38bc49.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Fairlady Z Z34 - 80230-AN009 - RZCrewGarage","id":1850809319535,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_fae0f657-33f2-41e3-b50e-2504fb38bc49.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_fae0f657-33f2-41e3-b50e-2504fb38bc49.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -21mm (Max Adjustment: 0 ~ -34\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 106.9Nm\u003cbr\u003eCompression Setting: 26.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -62\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 4.51Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Version NISMO Compatibility not confirmed. Rear:Separate type.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -21mm (Max Adjustment: 0 ~ -34\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 106.9Nm\u003cbr\u003eCompression Setting: 26.5Nm\u003chr\u003eVersion NISMO Compatibility not confirmed. Rear:Separate type.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -62\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 4.51Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312819311,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Silvia S14","handle":"hks-hipermax-iv-gt-coilovers-nissan-silvia-s14-80230-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on S15(SR20DET).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003chr\u003eHeight data is based on S15(SR20DET).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:44+08:00","created_at":"2019-02-08T13:06:45+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4"],"price":161500,"price_min":161500,"price_max":161500,"available":false,"price_varies":false,"compare_at_price":201900,"compare_at_price_min":201900,"compare_at_price_max":201900,"compare_at_price_varies":false,"variants":[{"id":20025495781487,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":161500,"weight":26000,"compare_at_price":201900,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5057bb59-2cc2-4240-99b5-64ad0f861d0f.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5057bb59-2cc2-4240-99b5-64ad0f861d0f.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Silvia S14 - 80230-AN002 - RZCrewGarage","id":1850808926319,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5057bb59-2cc2-4240-99b5-64ad0f861d0f.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5057bb59-2cc2-4240-99b5-64ad0f861d0f.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on S15(SR20DET).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003chr\u003eHeight data is based on S15(SR20DET).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312786543,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Silvia S15","handle":"hks-hipermax-iv-gt-coilovers-nissan-silvia-s15-80230-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:44+08:00","created_at":"2019-02-08T13:06:44+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1999","2000","2001","2002","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","silvia-s15-1999-2002-na-sr20de-i4","silvia-s15-1999-2002-tc-sr20det-i4"],"price":161500,"price_min":161500,"price_max":161500,"available":false,"price_varies":false,"compare_at_price":201900,"compare_at_price_min":201900,"compare_at_price_max":201900,"compare_at_price_varies":false,"variants":[{"id":20025495748719,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Silvia S15","public_title":null,"options":["Default Title"],"price":161500,"weight":26000,"compare_at_price":201900,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_3a21937b-1c8e-4e3b-97e0-dc24a3de6538.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_3a21937b-1c8e-4e3b-97e0-dc24a3de6538.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Silvia S15 - 80230-AN002 - RZCrewGarage","id":1850808893551,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_3a21937b-1c8e-4e3b-97e0-dc24a3de6538.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_3a21937b-1c8e-4e3b-97e0-dc24a3de6538.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312983151,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline ER34 Turbo","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-er34-turbo-80230-an005","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN005\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -41mm (Max Adjustment: 0 ~ -67\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 84.3Nm\u003cbr\u003eCompression Setting: 16.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -118\u003cbr\u003eSpring Rate: F=69(7)\/R=49(5)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Can't install to NAThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -41mm (Max Adjustment: 0 ~ -67\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 84.3Nm\u003cbr\u003eCompression Setting: 16.7Nm\u003chr\u003eCan't install to NA\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -118\u003cbr\u003eSpring Rate: F=69(7)\/R=49(5)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:49+08:00","created_at":"2019-02-08T13:06:49+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1998","1999","2000","2001","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-er34-kouki-2000-2001-tc-rb25det-i6","skyline-er34-zenki-1998-2000-tc-rb25det-i6"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495945327,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline ER34 Turbo","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2616ae4c-082e-4067-acac-d36f2eed02bc.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2616ae4c-082e-4067-acac-d36f2eed02bc.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline ER34 Turbo - 80230-AN005 - RZCrewGarage","id":1850809090159,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2616ae4c-082e-4067-acac-d36f2eed02bc.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2616ae4c-082e-4067-acac-d36f2eed02bc.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN005\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -41mm (Max Adjustment: 0 ~ -67\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 84.3Nm\u003cbr\u003eCompression Setting: 16.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -118\u003cbr\u003eSpring Rate: F=69(7)\/R=49(5)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Can't install to NAThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -41mm (Max Adjustment: 0 ~ -67\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 84.3Nm\u003cbr\u003eCompression Setting: 16.7Nm\u003chr\u003eCan't install to NA\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -118\u003cbr\u003eSpring Rate: F=69(7)\/R=49(5)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125313048687,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan BCNR33","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-sedan-bcnr33-80230-an007","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN007\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN007\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -36mm (Max Adjustment: 0 ~ -85\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 96.1Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -27mm (Max Adjustment: 0 ~ -111\u003cbr\u003eSpring Rate: F=78(8)\/R=69(7)kg\u003cbr\u003eRebound Setting: 6.57Nm\u003cbr\u003eCompression Setting: 1.96Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN007\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -36mm (Max Adjustment: 0 ~ -85\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 96.1Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -27mm (Max Adjustment: 0 ~ -111\u003cbr\u003eSpring Rate: F=78(8)\/R=69(7)kg\u003cbr\u003eRebound Setting: 6.57Nm\u003cbr\u003eCompression Setting: 1.96Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:51+08:00","created_at":"2019-02-08T13:06:51+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1995","1996","1997","1998","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-gt-r-bcnr33-chuki-1996-1997-tt-rb26dett-i6","skyline-gt-r-bcnr33-kouki-1997-1998-tt-rb26dett-i6","skyline-gt-r-bcnr33-zenki-1995-1996-tt-rb26dett-i6"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025496010863,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN007","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan BCNR33","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_a1bea545-8a01-40b9-b71f-7eff592abd52.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_a1bea545-8a01-40b9-b71f-7eff592abd52.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline Sedan BCNR33 - 80230-AN007 - RZCrewGarage","id":1850809155695,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_a1bea545-8a01-40b9-b71f-7eff592abd52.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_a1bea545-8a01-40b9-b71f-7eff592abd52.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN007\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN007\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -36mm (Max Adjustment: 0 ~ -85\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 96.1Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -27mm (Max Adjustment: 0 ~ -111\u003cbr\u003eSpring Rate: F=78(8)\/R=69(7)kg\u003cbr\u003eRebound Setting: 6.57Nm\u003cbr\u003eCompression Setting: 1.96Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN007\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -36mm (Max Adjustment: 0 ~ -85\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 96.1Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -27mm (Max Adjustment: 0 ~ -111\u003cbr\u003eSpring Rate: F=78(8)\/R=69(7)kg\u003cbr\u003eRebound Setting: 6.57Nm\u003cbr\u003eCompression Setting: 1.96Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125313081455,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan BNR32","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-sedan-bnr32-80230-an008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN008\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN008\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -38mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 86.3Nm\u003cbr\u003eCompression Setting: 18.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -89\u003cbr\u003eSpring Rate: F=69(7)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 2.16Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN008\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -38mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 86.3Nm\u003cbr\u003eCompression Setting: 18.6Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -89\u003cbr\u003eSpring Rate: F=69(7)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 2.16Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:52+08:00","created_at":"2019-02-08T13:06:52+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1989","1990","1991","1992","1993","1994","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025496043631,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan BNR32","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_ee576ddd-5973-4b11-bcc3-b3abdc3f53da.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_ee576ddd-5973-4b11-bcc3-b3abdc3f53da.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline Sedan BNR32 - 80230-AN008 - RZCrewGarage","id":1850809188463,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_ee576ddd-5973-4b11-bcc3-b3abdc3f53da.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_ee576ddd-5973-4b11-bcc3-b3abdc3f53da.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN008\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN008\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -38mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 86.3Nm\u003cbr\u003eCompression Setting: 18.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -89\u003cbr\u003eSpring Rate: F=69(7)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 2.16Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN008\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -38mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 86.3Nm\u003cbr\u003eCompression Setting: 18.6Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -89\u003cbr\u003eSpring Rate: F=69(7)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 2.16Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125313015919,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan BNR34","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-sedan-bnr34-80230-an007","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN007\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN007\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -41mm (Max Adjustment: 0 ~ -91\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 96.1Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -107\u003cbr\u003eSpring Rate: F=78(8)\/R=69(7)kg\u003cbr\u003eRebound Setting: 6.57Nm\u003cbr\u003eCompression Setting: 1.96Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN007\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -41mm (Max Adjustment: 0 ~ -91\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 96.1Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -107\u003cbr\u003eSpring Rate: F=78(8)\/R=69(7)kg\u003cbr\u003eRebound Setting: 6.57Nm\u003cbr\u003eCompression Setting: 1.96Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:50+08:00","created_at":"2019-02-08T13:06:50+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1999","2000","2001","2002","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-gt-r-bnr34-kouki-2000-2002-tt-rb26dett-i6","skyline-gt-r-bnr34-zenki-1999-2000-tt-rb26dett-i6"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495978095,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN007","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan BNR34","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_efb5ab88-c3bb-460c-9043-965cc9a0ef67.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_efb5ab88-c3bb-460c-9043-965cc9a0ef67.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline Sedan BNR34 - 80230-AN007 - RZCrewGarage","id":1850809122927,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_efb5ab88-c3bb-460c-9043-965cc9a0ef67.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_efb5ab88-c3bb-460c-9043-965cc9a0ef67.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN007\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN007\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -41mm (Max Adjustment: 0 ~ -91\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 96.1Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -107\u003cbr\u003eSpring Rate: F=78(8)\/R=69(7)kg\u003cbr\u003eRebound Setting: 6.57Nm\u003cbr\u003eCompression Setting: 1.96Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN007\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -41mm (Max Adjustment: 0 ~ -91\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 96.1Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -107\u003cbr\u003eSpring Rate: F=78(8)\/R=69(7)kg\u003cbr\u003eRebound Setting: 6.57Nm\u003cbr\u003eCompression Setting: 1.96Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125313114223,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan CKV36","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-sedan-ckv36-80230-an004","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -102\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -23mm (Max Adjustment: -7 ~ -66\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -102\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -23mm (Max Adjustment: -7 ~ -66\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:53+08:00","created_at":"2019-02-08T13:06:53+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-coupe-ckv36-kouki-2008-2018-na-vq37vhr-v6","skyline-coupe-ckv36-zenki-2007-2008-na-vq37vhr-v6"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025496076399,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan CKV36","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_a4651fb9-5670-4014-bf08-4986c61f833c.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_a4651fb9-5670-4014-bf08-4986c61f833c.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline Sedan CKV36 - 80230-AN004 - RZCrewGarage","id":1850809221231,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_a4651fb9-5670-4014-bf08-4986c61f833c.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_a4651fb9-5670-4014-bf08-4986c61f833c.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -102\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -23mm (Max Adjustment: -7 ~ -66\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -102\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -23mm (Max Adjustment: -7 ~ -66\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125313146991,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan CPV35","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-sedan-cpv35-80230-an010","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN010\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear different type. * Vehicle height data of Z33.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003chr\u003eRear different type. * Vehicle height data of Z33.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:54+08:00","created_at":"2019-02-08T13:06:54+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-coupe-cpv35-kouki-2004-2007-na-vq35de-v6","skyline-coupe-cpv35-zenki-2003-2004-na-vq35de-v6"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025496109167,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan CPV35","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_bb71dabf-0241-4220-901e-c274097c7a89.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_bb71dabf-0241-4220-901e-c274097c7a89.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline Sedan CPV35 - 80230-AN010 - RZCrewGarage","id":1850809253999,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_bb71dabf-0241-4220-901e-c274097c7a89.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_bb71dabf-0241-4220-901e-c274097c7a89.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN010\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear different type. * Vehicle height data of Z33.The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN010\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: 0 ~ -38\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 128.5Nm\u003cbr\u003eCompression Setting: 27.5Nm\u003chr\u003eRear different type. * Vehicle height data of Z33.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -15mm (Max Adjustment: 0 ~ -50\u003cbr\u003eSpring Rate: F=88(9)\/R=88(9)kg\u003cbr\u003eRebound Setting: 6.37Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312852079,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan Hybrid HV37","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-sedan-hybrid-hv37-80230-an011","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN011\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN011\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0 ~ -66\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 100Nm\u003cbr\u003eCompression Setting: 50Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -26mm (Max Adjustment: 0 ~ -61\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5Nm\u003cbr\u003eCompression Setting: 4Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Application is not confirmed: Hybrid 4WD(HNV37) and 200GT-t(ZV37)The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN011\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0 ~ -66\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 100Nm\u003cbr\u003eCompression Setting: 50Nm\u003chr\u003eApplication is not confirmed: Hybrid 4WD(HNV37) and 200GT-t(ZV37)\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -26mm (Max Adjustment: 0 ~ -61\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5Nm\u003cbr\u003eCompression Setting: 4Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:45+08:00","created_at":"2019-02-08T13:06:46+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-sedan-hybrid-hv37-2014-2018-na-vq35hr-v6"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025495814255,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan Hybrid HV37","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_43af7d49-7b52-42c6-9e98-662687940cbb.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_43af7d49-7b52-42c6-9e98-662687940cbb.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline Sedan Hybrid HV37 - 80230-AN011 - RZCrewGarage","id":1850808959087,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_43af7d49-7b52-42c6-9e98-662687940cbb.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_43af7d49-7b52-42c6-9e98-662687940cbb.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN011\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN011\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0 ~ -66\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 100Nm\u003cbr\u003eCompression Setting: 50Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -26mm (Max Adjustment: 0 ~ -61\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5Nm\u003cbr\u003eCompression Setting: 4Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Application is not confirmed: Hybrid 4WD(HNV37) and 200GT-t(ZV37)The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN011\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0 ~ -66\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 100Nm\u003cbr\u003eCompression Setting: 50Nm\u003chr\u003eApplication is not confirmed: Hybrid 4WD(HNV37) and 200GT-t(ZV37)\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -26mm (Max Adjustment: 0 ~ -61\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5Nm\u003cbr\u003eCompression Setting: 4Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312884847,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan KV36","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-sedan-kv36-80230-an004","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:46+08:00","created_at":"2019-02-08T13:06:47+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-sedan-kv36-kouki-2008-2018-na-vq37vhr-v6","skyline-sedan-kv36-zenki-2007-2008-na-vq37vhr-v6"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025495847023,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan KV36","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_d6a01214-f248-41ce-8b40-28955f512a39.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_d6a01214-f248-41ce-8b40-28955f512a39.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline Sedan KV36 - 80230-AN004 - RZCrewGarage","id":1850808991855,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_d6a01214-f248-41ce-8b40-28955f512a39.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_d6a01214-f248-41ce-8b40-28955f512a39.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312917615,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan PV36","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-sedan-pv36-80230-an004","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:47+08:00","created_at":"2019-02-08T13:06:47+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-sedan-pv36-chuki-2007-2008-na-vq35hr-v6","skyline-sedan-pv36-kouki-2008-2018-na-vq35hr-v6","skyline-sedan-pv36-zenki-2006-2007-na-vq35hr-v6"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025495879791,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan PV36","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_84340278-37c6-4dd4-a6a6-298441fe6163.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_84340278-37c6-4dd4-a6a6-298441fe6163.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline Sedan PV36 - 80230-AN004 - RZCrewGarage","id":1850809024623,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_84340278-37c6-4dd4-a6a6-298441fe6163.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_84340278-37c6-4dd4-a6a6-298441fe6163.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312950383,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan V36","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-sedan-v36-80230-an004","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:48+08:00","created_at":"2019-02-08T13:06:49+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-sedan-v36-chuki-2007-2008-na-vq25hr-v6","skyline-sedan-v36-kouki-2008-2018-na-vq25hr-v6","skyline-sedan-v36-zenki-2006-2007-na-vq25hr-v6"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025495912559,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan V36","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_61475e1d-84a5-423f-bf9b-22c26f43d60e.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_61475e1d-84a5-423f-bf9b-22c26f43d60e.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline Sedan V36 - 80230-AN004 - RZCrewGarage","id":1850809057391,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_61475e1d-84a5-423f-bf9b-22c26f43d60e.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_61475e1d-84a5-423f-bf9b-22c26f43d60e.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0 ~ -103\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 35Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: -28 ~ -82\u003cbr\u003eSpring Rate: F=98(10)\/R=88(9)kg\u003cbr\u003eRebound Setting: 5.5Nm\u003cbr\u003eCompression Setting: 2.5Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125310525551,"title":"HKS - HIPERMAX IV SP Coilover Kit - Nissan Fairlady Z Z33","handle":"hks-hipermax-iv-sp-coilovers-nissan-fairlady-z-z33-80250-an005","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AN005\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -10mm (Max Adjustment: 0mm ~ -39mm\u003cbr\u003eSpring Rate: 14kg\u003cbr\u003eRebound Setting: 280Nm\u003cbr\u003eCompression Setting: 60Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -22mm (Max Adjustment: 0mm ~ -54mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 12Nm\u003cbr\u003eCompression Setting: 3.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -10mm (Max Adjustment: 0mm ~ -39mm\u003cbr\u003eSpring Rate: 14kg\u003cbr\u003eRebound Setting: 280Nm\u003cbr\u003eCompression Setting: 60Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -22mm (Max Adjustment: 0mm ~ -54mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 12Nm\u003cbr\u003eCompression Setting: 3.5Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:05:39+08:00","created_at":"2019-02-08T13:05:40+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2002","2003","2004","2005","2006","2007","2008","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","fairlady-z-z33-chuki-2004-2005-na-vq35de-v6","fairlady-z-z33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-z33-zenki-2002-2004-na-vq35de-v6","hks","hks22","nissan"],"price":227160,"price_min":227160,"price_max":227160,"available":true,"price_varies":false,"compare_at_price":277080,"compare_at_price_min":277080,"compare_at_price_max":277080,"compare_at_price_varies":false,"variants":[{"id":20025493389423,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80250-AN005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV SP Coilover Kit - Nissan Fairlady Z Z33","public_title":null,"options":["Default Title"],"price":227160,"weight":26000,"compare_at_price":277080,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_2ccdac17-f01b-46f9-870e-13bc0b53d4bf.jpg?v=1571709618"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_2ccdac17-f01b-46f9-870e-13bc0b53d4bf.jpg?v=1571709618","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV SP Coilovers - Nissan Fairlady Z Z33 - 80250-AN005 - RZCrewGarage","id":1850806665327,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_2ccdac17-f01b-46f9-870e-13bc0b53d4bf.jpg?v=1571709618"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_2ccdac17-f01b-46f9-870e-13bc0b53d4bf.jpg?v=1571709618","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AN005\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -10mm (Max Adjustment: 0mm ~ -39mm\u003cbr\u003eSpring Rate: 14kg\u003cbr\u003eRebound Setting: 280Nm\u003cbr\u003eCompression Setting: 60Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -22mm (Max Adjustment: 0mm ~ -54mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 12Nm\u003cbr\u003eCompression Setting: 3.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -10mm (Max Adjustment: 0mm ~ -39mm\u003cbr\u003eSpring Rate: 14kg\u003cbr\u003eRebound Setting: 280Nm\u003cbr\u003eCompression Setting: 60Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -22mm (Max Adjustment: 0mm ~ -54mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 12Nm\u003cbr\u003eCompression Setting: 3.5Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125310492783,"title":"HKS - HIPERMAX IV SP Coilover Kit - Nissan Fairlady Z Z34","handle":"hks-hipermax-iv-sp-coilovers-nissan-fairlady-z-z34-80250-an006","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AN006\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN006\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -14mm (Max Adjustment: 0mm ~ -33mm\u003cbr\u003eSpring Rate: 14kg\u003cbr\u003eRebound Setting: 278.5Nm\u003cbr\u003eCompression Setting: 56.9Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -18mm (Max Adjustment: 0mm ~ -51mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 7.26Nm\u003cbr\u003eCompression Setting: 3.33Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Version NISMO Compatibility not confirmed. Rear:Separate type.The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN006\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -14mm (Max Adjustment: 0mm ~ -33mm\u003cbr\u003eSpring Rate: 14kg\u003cbr\u003eRebound Setting: 278.5Nm\u003cbr\u003eCompression Setting: 56.9Nm\u003chr\u003eVersion NISMO Compatibility not confirmed. Rear:Separate type.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -18mm (Max Adjustment: 0mm ~ -51mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 7.26Nm\u003cbr\u003eCompression Setting: 3.33Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:05:38+08:00","created_at":"2019-02-08T13:05:39+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","hks","hks22","nissan"],"price":236640,"price_min":236640,"price_max":236640,"available":true,"price_varies":false,"compare_at_price":288600,"compare_at_price_min":288600,"compare_at_price_max":288600,"compare_at_price_varies":false,"variants":[{"id":20025493356655,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80250-AN006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV SP Coilover Kit - Nissan Fairlady Z Z34","public_title":null,"options":["Default Title"],"price":236640,"weight":26000,"compare_at_price":288600,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_f437e7d4-4522-4aa6-b140-d9830ddc4328.jpg?v=1571709618"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_f437e7d4-4522-4aa6-b140-d9830ddc4328.jpg?v=1571709618","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV SP Coilovers - Nissan Fairlady Z Z34 - 80250-AN006 - RZCrewGarage","id":1850806632559,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_f437e7d4-4522-4aa6-b140-d9830ddc4328.jpg?v=1571709618"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_f437e7d4-4522-4aa6-b140-d9830ddc4328.jpg?v=1571709618","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AN006\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN006\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -14mm (Max Adjustment: 0mm ~ -33mm\u003cbr\u003eSpring Rate: 14kg\u003cbr\u003eRebound Setting: 278.5Nm\u003cbr\u003eCompression Setting: 56.9Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -18mm (Max Adjustment: 0mm ~ -51mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 7.26Nm\u003cbr\u003eCompression Setting: 3.33Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Version NISMO Compatibility not confirmed. Rear:Separate type.The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN006\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -14mm (Max Adjustment: 0mm ~ -33mm\u003cbr\u003eSpring Rate: 14kg\u003cbr\u003eRebound Setting: 278.5Nm\u003cbr\u003eCompression Setting: 56.9Nm\u003chr\u003eVersion NISMO Compatibility not confirmed. Rear:Separate type.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -18mm (Max Adjustment: 0mm ~ -51mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 7.26Nm\u003cbr\u003eCompression Setting: 3.33Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125310230639,"title":"HKS - HIPERMAX IV SP Coilover Kit - Nissan GT-R R35","handle":"hks-hipermax-iv-sp-coilovers-nissan-gt-r-r35-80250-an001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AN001\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -19mm (Max Adjustment: 0mm ~ -91mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 300Nm\u003cbr\u003eCompression Setting: 41Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -17mm (Max Adjustment: 0mm ~ -68mm\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eRebound Setting: 9Nm\u003cbr\u003eCompression Setting: 3.6Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on MY07.The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -19mm (Max Adjustment: 0mm ~ -91mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 300Nm\u003cbr\u003eCompression Setting: 41Nm\u003chr\u003eHeight data is based on MY07.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -17mm (Max Adjustment: 0mm ~ -68mm\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eRebound Setting: 9Nm\u003cbr\u003eCompression Setting: 3.6Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:05:33+08:00","created_at":"2019-02-08T13:05:33+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","hks","hks22","nissan"],"price":379680,"price_min":379680,"price_max":379680,"available":true,"price_varies":false,"compare_at_price":462960,"compare_at_price_min":462960,"compare_at_price_max":462960,"compare_at_price_varies":false,"variants":[{"id":20025493127279,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80250-AN001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV SP Coilover Kit - Nissan GT-R R35","public_title":null,"options":["Default Title"],"price":379680,"weight":26000,"compare_at_price":462960,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_ca17da31-b3b8-4ab5-9ca0-506b78663946.jpg?v=1571709617"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_ca17da31-b3b8-4ab5-9ca0-506b78663946.jpg?v=1571709617","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV SP Coilovers - Nissan GT-R R35 - 80250-AN001 - RZCrewGarage","id":1850806370415,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_ca17da31-b3b8-4ab5-9ca0-506b78663946.jpg?v=1571709617"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_ca17da31-b3b8-4ab5-9ca0-506b78663946.jpg?v=1571709617","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AN001\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -19mm (Max Adjustment: 0mm ~ -91mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 300Nm\u003cbr\u003eCompression Setting: 41Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -17mm (Max Adjustment: 0mm ~ -68mm\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eRebound Setting: 9Nm\u003cbr\u003eCompression Setting: 3.6Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on MY07.The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -19mm (Max Adjustment: 0mm ~ -91mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 300Nm\u003cbr\u003eCompression Setting: 41Nm\u003chr\u003eHeight data is based on MY07.\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -17mm (Max Adjustment: 0mm ~ -68mm\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eRebound Setting: 9Nm\u003cbr\u003eCompression Setting: 3.6Nm\u003c!--split--\u003e\u003c!--split--\u003e"}