CR-Z | ZF1 | 2010-2012 | H | LEA | I4

Sort by:
16% OFF
Cusco - 16mm Rear Anti Roll Bar - Honda CR-Z ZF1 - 386 311 B16
{"id":8190381293843,"title":"Cusco - 16mm Rear Anti Roll Bar - Honda CR-Z ZF1","handle":"cusco-16mm-rear-anti-roll-bar-honda-cr-z-zf1-386-311-b16","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 386 311 B16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:54:01+08:00","created_at":"2023-03-20T14:54:02+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2010","2011","2012","anti-roll-bars","cr-z-zf1-2010-2012-h-lea-i4","cusco-japan","cusco-japan30","honda","JP1","rear","steel","tva","ws126"],"price":48770,"price_min":48770,"price_max":48770,"available":true,"price_varies":false,"compare_at_price":58100,"compare_at_price_min":58100,"compare_at_price_max":58100,"compare_at_price_varies":false,"variants":[{"id":44654429503763,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"386 311 B16","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 16mm Rear Anti Roll Bar - Honda CR-Z ZF1","public_title":null,"options":["Default Title"],"price":48770,"weight":12000,"compare_at_price":58100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rear_Anti_roll_bar_with_bush_and_bracket_008c5d8e-d935-4bbe-befa-bf3dca684b8b.jpg?v=1679295288"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rear_Anti_roll_bar_with_bush_and_bracket_008c5d8e-d935-4bbe-befa-bf3dca684b8b.jpg?v=1679295288","options":["Title"],"media":[{"alt":"Cusco - 16mm Rear Anti Roll Bar - Honda CR-Z ZF1 - 386 311 B16","id":33392647242003,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rear_Anti_roll_bar_with_bush_and_bracket_008c5d8e-d935-4bbe-befa-bf3dca684b8b.jpg?v=1679295288"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rear_Anti_roll_bar_with_bush_and_bracket_008c5d8e-d935-4bbe-befa-bf3dca684b8b.jpg?v=1679295288","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 386 311 B16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e"}
Cusco - 16mm Rear Anti Roll Bar - Honda CR-Z ZF1 - 386 311 B16

Cusco - 16mm Rear Anti Roll Bar - Honda CR-Z ZF1

€487,70

Specifications:Manufacturer: Cusco JapanPart Number: 386 311 B16Bar Type: Anti Roll BarPosition: RearPoints: 2 PointsMaterial: SteelManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.The Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.The Cusco anti-sway bar will dramatically reduce...


More Info
13% OFF
Cusco - 20mm Front Anti Roll Bar - Honda CR-Z ZF1 - 309 311 A20
{"id":8190381228307,"title":"Cusco - 20mm Front Anti Roll Bar - Honda CR-Z ZF1","handle":"cusco-20mm-front-anti-roll-bar-honda-cr-z-zf1-309-311-a20","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 311 A20\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?20, 135% Compare To Standard *Standard ?18mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:54:00+08:00","created_at":"2023-03-20T14:54:01+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2010","2011","2012","anti-roll-bars","cr-z-zf1-2010-2012-h-lea-i4","cusco-japan","cusco-japan30","front","honda","JP1","steel","tva","ws126"],"price":41710,"price_min":41710,"price_max":41710,"available":true,"price_varies":false,"compare_at_price":48100,"compare_at_price_min":48100,"compare_at_price_max":48100,"compare_at_price_varies":false,"variants":[{"id":44654429339923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 311 A20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 20mm Front Anti Roll Bar - Honda CR-Z ZF1","public_title":null,"options":["Default Title"],"price":41710,"weight":12000,"compare_at_price":48100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_82e1e96c-7ffe-491b-ae86-1cd2185e0f27.jpg?v=1679295241"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_82e1e96c-7ffe-491b-ae86-1cd2185e0f27.jpg?v=1679295241","options":["Title"],"media":[{"alt":"Cusco - 20mm Front Anti Roll Bar - Honda CR-Z ZF1 - 309 311 A20","id":33392632955155,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_82e1e96c-7ffe-491b-ae86-1cd2185e0f27.jpg?v=1679295241"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_82e1e96c-7ffe-491b-ae86-1cd2185e0f27.jpg?v=1679295241","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 311 A20\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?20, 135% Compare To Standard *Standard ?18mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e"}
Cusco - 20mm Front Anti Roll Bar - Honda CR-Z ZF1 - 309 311 A20

Cusco - 20mm Front Anti Roll Bar - Honda CR-Z ZF1

€417,10

Specifications:Manufacturer: Cusco JapanPart Number: 309 311 A20Bar Type: Anti Roll BarPosition: FrontPoints: 2 PointsMaterial: SteelManufacturer Notes: ?20, 135% Compare To Standard *Standard ?18mm. Bushings Included.The Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.The Cusco anti...


More Info
10% OFF
Cusco - Front Hybrid shaft - Honda CR-Z ZF1 - 309 542 S
{"id":8190365270291,"title":"Cusco - Front Hybrid shaft - Honda CR-Z ZF1","handle":"cusco-front-hybrid-shaft-honda-cr-z-zf1-309-542-s","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 542 S\u003cbr\u003eBar Type: Hybrid shaft\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:48:57+08:00","created_at":"2023-03-20T14:48:58+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2010","2011","2012","aluminium","cr-z-zf1-2010-2012-h-lea-i4","cusco-japan","cusco-japan30","front","honda","JP1","strut-bars","tva","ws126"],"price":27310,"price_min":27310,"price_max":27310,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":44654244725011,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 542 S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Hybrid shaft - Honda CR-Z ZF1","public_title":null,"options":["Default Title"],"price":27310,"weight":9000,"compare_at_price":30400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/hybrid-shaft2_d86937e2-0327-4261-ae0b-2de8850d734d.jpg?v=1679294938"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/hybrid-shaft2_d86937e2-0327-4261-ae0b-2de8850d734d.jpg?v=1679294938","options":["Title"],"media":[{"alt":"Cusco - Front Hybrid shaft - Honda CR-Z ZF1 - 309 542 S","id":33392561520915,"position":1,"preview_image":{"aspect_ratio":1.238,"height":484,"width":599,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/hybrid-shaft2_d86937e2-0327-4261-ae0b-2de8850d734d.jpg?v=1679294938"},"aspect_ratio":1.238,"height":484,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/hybrid-shaft2_d86937e2-0327-4261-ae0b-2de8850d734d.jpg?v=1679294938","width":599}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 542 S\u003cbr\u003eBar Type: Hybrid shaft\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e"}
Cusco - Front Hybrid shaft - Honda CR-Z ZF1 - 309 542 S

Cusco - Front Hybrid shaft - Honda CR-Z ZF1

€273,10

Specifications:Manufacturer: Cusco JapanPart Number: 309 542 SBar Type: Hybrid shaftPosition: FrontPoints: 2 PointsMaterial: AluminiumCusco Hybrid Strut BraceHybrid brace with damping material between the mounting plate and the shaftLightweight aluminum made of oval cross sectionTypes: Three center bar types are available, specifically set per a...


More Info
13% OFF
Cusco - Front Hybrid strut brace - Honda CR-Z ZF1 - 309 542 A
{"id":8190365171987,"title":"Cusco - Front Hybrid strut brace - Honda CR-Z ZF1","handle":"cusco-front-hybrid-strut-brace-honda-cr-z-zf1-309-542-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 542 A\u003cbr\u003eBar Type: Hybrid strut brace\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:48:55+08:00","created_at":"2023-03-20T14:48:56+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2010","2011","2012","aluminium","cr-z-zf1-2010-2012-h-lea-i4","cusco-japan","cusco-japan30","front","honda","JP1","strut-bars","tva","ws126"],"price":32600,"price_min":32600,"price_max":32600,"available":true,"price_varies":false,"compare_at_price":37900,"compare_at_price_min":37900,"compare_at_price_max":37900,"compare_at_price_varies":false,"variants":[{"id":44654244004115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 542 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Hybrid strut brace - Honda CR-Z ZF1","public_title":null,"options":["Default Title"],"price":32600,"weight":9000,"compare_at_price":37900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Hybrid_strut_brace_312a8428-19a7-4fdd-9fca-44e683b01941.jpg?v=1679294936"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Hybrid_strut_brace_312a8428-19a7-4fdd-9fca-44e683b01941.jpg?v=1679294936","options":["Title"],"media":[{"alt":"Cusco - Front Hybrid strut brace - Honda CR-Z ZF1 - 309 542 A","id":33392561455379,"position":1,"preview_image":{"aspect_ratio":1.499,"height":427,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Hybrid_strut_brace_312a8428-19a7-4fdd-9fca-44e683b01941.jpg?v=1679294936"},"aspect_ratio":1.499,"height":427,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Hybrid_strut_brace_312a8428-19a7-4fdd-9fca-44e683b01941.jpg?v=1679294936","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 542 A\u003cbr\u003eBar Type: Hybrid strut brace\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e"}
Cusco - Front Hybrid strut brace - Honda CR-Z ZF1 - 309 542 A

Cusco - Front Hybrid strut brace - Honda CR-Z ZF1

€326,00

Specifications:Manufacturer: Cusco JapanPart Number: 309 542 ABar Type: Hybrid strut bracePosition: FrontPoints: 2 PointsMaterial: AluminiumCusco Hybrid Strut BraceHybrid brace with damping material between the mounting plate and the shaftLightweight aluminum made of oval cross sectionTypes: Three center bar types are available, specifically set...


More Info
12% OFF
Cusco - Front Strut brace Type OS - Honda CR-Z ZF1 - 309 540 A
{"id":8190365040915,"title":"Cusco - Front Strut brace Type OS - Honda CR-Z ZF1","handle":"cusco-front-strut-brace-type-os-honda-cr-z-zf1-309-540-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 540 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:48:51+08:00","created_at":"2023-03-20T14:48:53+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2010","2011","2012","aluminium","cr-z-zf1-2010-2012-h-lea-i4","cusco-japan","cusco-japan30","front","honda","JP1","strut-bars","tva","ws126"],"price":29960,"price_min":29960,"price_max":29960,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":44654243643667,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 540 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type OS - Honda CR-Z ZF1","public_title":null,"options":["Default Title"],"price":29960,"weight":9000,"compare_at_price":34100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_f46bb07a-68f6-4578-ae21-04a9dfdd363b.jpg?v=1679294933"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_f46bb07a-68f6-4578-ae21-04a9dfdd363b.jpg?v=1679294933","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type OS - Honda CR-Z ZF1 - 309 540 A","id":33392560734483,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_f46bb07a-68f6-4578-ae21-04a9dfdd363b.jpg?v=1679294933"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_f46bb07a-68f6-4578-ae21-04a9dfdd363b.jpg?v=1679294933","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 540 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e"}
Cusco - Front Strut brace Type OS - Honda CR-Z ZF1 - 309 540 A

Cusco - Front Strut brace Type OS - Honda CR-Z ZF1

€299,60

Specifications:Manufacturer: Cusco JapanPart Number: 309 540 ABar Type: Strut brace Type OSPosition: FrontPoints: 2 PointsMaterial: AluminiumCusco Strut Tower Bars Type OS, Oval Shaft designCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect bala...


More Info
12% OFF
Cusco - Rear Strut brace Type OS - Honda CR-Z ZF1 - 309 541 A
{"id":8190365106451,"title":"Cusco - Rear Strut brace Type OS - Honda CR-Z ZF1","handle":"cusco-rear-strut-brace-type-os-honda-cr-z-zf1-309-541-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 541 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:48:53+08:00","created_at":"2023-03-20T14:48:54+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2010","2011","2012","aluminium","cr-z-zf1-2010-2012-h-lea-i4","cusco-japan","cusco-japan30","honda","JP1","rear","strut-bars","tva","ws126"],"price":29960,"price_min":29960,"price_max":29960,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":44654243840275,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 541 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Rear Strut brace Type OS - Honda CR-Z ZF1","public_title":null,"options":["Default Title"],"price":29960,"weight":9000,"compare_at_price":34100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_66e2e4e7-7361-460c-a736-6d232333f38d.jpg?v=1679294934"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_66e2e4e7-7361-460c-a736-6d232333f38d.jpg?v=1679294934","options":["Title"],"media":[{"alt":"Cusco - Rear Strut brace Type OS - Honda CR-Z ZF1 - 309 541 A","id":33392561062163,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_66e2e4e7-7361-460c-a736-6d232333f38d.jpg?v=1679294934"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_66e2e4e7-7361-460c-a736-6d232333f38d.jpg?v=1679294934","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 541 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003c!--split--\u003e"}
Cusco - Rear Strut brace Type OS - Honda CR-Z ZF1 - 309 541 A

Cusco - Rear Strut brace Type OS - Honda CR-Z ZF1

€299,60

Specifications:Manufacturer: Cusco JapanPart Number: 309 541 ABar Type: Strut brace Type OSPosition: RearPoints: 2 PointsMaterial: AluminiumCusco Strut Tower Bars Type OS, Oval Shaft designCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balan...


More Info
19% OFF
Cusco Japan - Sport R Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 64R CB - Rzcrewgarage
{"id":1778150932591,"title":"Cusco Japan - Sport R Coilover Kit - Honda CR-Z ZF1\/ZF2","handle":"cusco-japan-sport-r-coilover-kit-honda-cr-z-zf1-zf2-309-64r-cb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 64R CB\u003cbr\u003eType: Sport R Ref 309 64R CB\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -55 to 0 ? -60 to -35\u003cbr\u003eMaximum adjustment F\/R: - ? -\u003cbr\u003eSpring Rates (Kg): 10 or (7\/8\/9\/11\/12\/14)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Aluminum spacer\u003cbr\u003eSpring Rates (Kg): 9 or (6\/7\/8\/10\/11\/12)\u003cbr\u003eOptions: front camber is adjustable \u003cbr\u003eAdditional Infos: Auto Levelizer Adjust Rod?-\u003cbr\u003e\u003cbr\u003e The SPORT R was developed for all-out track cars participating in full-scale racing, time attack competitions. \u003cbr\u003eThese coilovers are optimised for track compound tyres.\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003e24-Step Adjustment Range:\u003cbr\u003ePatented Cusco needle-valves are precision fitted for precise adjustments .\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:25+08:00","created_at":"2018-10-25T23:31:26+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","cusco-japan25","dampening-and-height-adjustable","honda"],"price":259920,"price_min":259920,"price_max":259920,"available":true,"price_varies":false,"compare_at_price":324840,"compare_at_price_min":324840,"compare_at_price_max":324840,"compare_at_price_varies":false,"variants":[{"id":16766375034991,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 64R CB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Sport R Coilover Kit - Honda CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":259920,"weight":26500,"compare_at_price":324840,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-R_da7f768b-fb9b-4d20-841e-fd1c02f2b71a.jpg?v=1571709566"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-R_da7f768b-fb9b-4d20-841e-fd1c02f2b71a.jpg?v=1571709566","options":["Title"],"media":[{"alt":"Cusco Japan - Sport R Coilover Kit - Honda CR-Z ZF1\/ZF2 - 309 64R CB - Rzcrewgarage","id":1287588085871,"position":1,"preview_image":{"aspect_ratio":1.667,"height":300,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-R_da7f768b-fb9b-4d20-841e-fd1c02f2b71a.jpg?v=1571709566"},"aspect_ratio":1.667,"height":300,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-R_da7f768b-fb9b-4d20-841e-fd1c02f2b71a.jpg?v=1571709566","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 64R CB\u003cbr\u003eType: Sport R Ref 309 64R CB\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -55 to 0 ? -60 to -35\u003cbr\u003eMaximum adjustment F\/R: - ? -\u003cbr\u003eSpring Rates (Kg): 10 or (7\/8\/9\/11\/12\/14)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Aluminum spacer\u003cbr\u003eSpring Rates (Kg): 9 or (6\/7\/8\/10\/11\/12)\u003cbr\u003eOptions: front camber is adjustable \u003cbr\u003eAdditional Infos: Auto Levelizer Adjust Rod?-\u003cbr\u003e\u003cbr\u003e The SPORT R was developed for all-out track cars participating in full-scale racing, time attack competitions. \u003cbr\u003eThese coilovers are optimised for track compound tyres.\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003e24-Step Adjustment Range:\u003cbr\u003ePatented Cusco needle-valves are precision fitted for precise adjustments .\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Sport R Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 64R CB - Rzcrewgarage

Cusco Japan - Sport R Coilover Kit - Honda CR-Z ZF1/ZF2

€2.599,20

Specifications:Manufacturer: Cusco JapanPart Number: 309 64R CBType: Sport R Ref 309 64R CBFront Specs: 24 steps Full-length AdjustableRecommended Height F/R: -55 to 0 ? -60 to -35Maximum adjustment F/R: - ? -Spring Rates (Kg): 10 or (7/8/9/11/12/14)Rear Specs: 24 steps Aluminum spacerSpring Rates (Kg): 9 or (6/7/8/10/11/12)Options: front camber...


More Info
20% OFF
Cusco Japan - Sport S Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 64S CB - Rzcrewgarage
{"id":1778150834287,"title":"Cusco Japan - Sport S Coilover Kit - Honda CR-Z ZF1\/ZF2","handle":"cusco-japan-sport-s-coilover-kit-honda-cr-z-zf1-zf2-309-64s-cb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 64S CB\u003cbr\u003eType: Sport S Ref 309 64S CB\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -55 to 0 ? -55 to -25\u003cbr\u003eMaximum adjustment F\/R: - ? -\u003cbr\u003eSpring Rates (Kg): 6 or (7\/8\/9)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 4 or (3.5\/5\/6)\u003cbr\u003eOptions: front camber is adjustable \u003cbr\u003eAdditional Infos: Auto Levelizer Adjust Rod?-\u003cbr\u003e\u003cbr\u003e The SPORT S was developed following the SPORT R specifications, but with damping force, sprint rates and stroke geared toward the streets, making them the ultimate weapon for users who like to track their daily car, without sacrificing too much on the comfort side.\u003cbr\u003eTo make the coilovers more street friendly, the rear upper mounts are made from reinforced rubber, increasing the ride comfort while reducing the noise.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003e24-Step Adjustment Range:\u003cbr\u003ePatented Cusco needle-valves are precision fitted for precise adjustments .\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:23+08:00","created_at":"2018-10-25T23:31:24+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","cusco-japan25","dampening-and-height-adjustable","honda"],"price":249960,"price_min":249960,"price_max":249960,"available":true,"price_varies":false,"compare_at_price":312480,"compare_at_price_min":312480,"compare_at_price_max":312480,"compare_at_price_varies":false,"variants":[{"id":16766374969455,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 64S CB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Sport S Coilover Kit - Honda CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":249960,"weight":26500,"compare_at_price":312480,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-S_866d4031-e285-4290-890d-2fe28eb4d234.jpg?v=1571709566"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-S_866d4031-e285-4290-890d-2fe28eb4d234.jpg?v=1571709566","options":["Title"],"media":[{"alt":"Cusco Japan - Sport S Coilover Kit - Honda CR-Z ZF1\/ZF2 - 309 64S CB - Rzcrewgarage","id":1287587987567,"position":1,"preview_image":{"aspect_ratio":1.344,"height":372,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-S_866d4031-e285-4290-890d-2fe28eb4d234.jpg?v=1571709566"},"aspect_ratio":1.344,"height":372,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-S_866d4031-e285-4290-890d-2fe28eb4d234.jpg?v=1571709566","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 64S CB\u003cbr\u003eType: Sport S Ref 309 64S CB\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -55 to 0 ? -55 to -25\u003cbr\u003eMaximum adjustment F\/R: - ? -\u003cbr\u003eSpring Rates (Kg): 6 or (7\/8\/9)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 4 or (3.5\/5\/6)\u003cbr\u003eOptions: front camber is adjustable \u003cbr\u003eAdditional Infos: Auto Levelizer Adjust Rod?-\u003cbr\u003e\u003cbr\u003e The SPORT S was developed following the SPORT R specifications, but with damping force, sprint rates and stroke geared toward the streets, making them the ultimate weapon for users who like to track their daily car, without sacrificing too much on the comfort side.\u003cbr\u003eTo make the coilovers more street friendly, the rear upper mounts are made from reinforced rubber, increasing the ride comfort while reducing the noise.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003e24-Step Adjustment Range:\u003cbr\u003ePatented Cusco needle-valves are precision fitted for precise adjustments .\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Sport S Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 64S CB - Rzcrewgarage

Cusco Japan - Sport S Coilover Kit - Honda CR-Z ZF1/ZF2

€2.499,60

Specifications:Manufacturer: Cusco JapanPart Number: 309 64S CBType: Sport S Ref 309 64S CBFront Specs: 24 steps Full-length AdjustableRecommended Height F/R: -55 to 0 ? -55 to -25Maximum adjustment F/R: - ? -Spring Rates (Kg): 6 or (7/8/9)Rear Specs: 24 steps Threaded spacerSpring Rates (Kg): 4 or (3.5/5/6)Options: front camber is adjustable Ad...


More Info
19% OFF
Cusco Japan - Sport X Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 64X CB - Rzcrewgarage
{"id":1778150965359,"title":"Cusco Japan - Sport X Coilover Kit - Honda CR-Z ZF1\/ZF2","handle":"cusco-japan-sport-x-coilover-kit-honda-cr-z-zf1-zf2-309-64x-cb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 64X CB\u003cbr\u003eType: Sport X Ref 309 64X CB\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -55 to 0 ? -60 to -35\u003cbr\u003eMaximum adjustment F\/R: - ? -\u003cbr\u003eSpring Rates (Kg): 10 or (7\/8\/9\/11\/12\/14)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Aluminum spacer\u003cbr\u003eSpring Rates (Kg): 9 or (6\/7\/8\/10\/11\/12)\u003cbr\u003eOptions: front camber is adjustable \u003cbr\u003eAdditional Infos: Auto Levelizer Adjust Rod?-\u003cbr\u003e\u003cbr\u003e The SPORT X are racing coilovers by excellence. With 3 way dampening adjustment, these coilovers will allow you to shave fractions of seconds off your best times, putting you ahead of the competition.\u003cbr\u003eThese coilovers are developped to be used with track compound tyres.\u003cbr\u003eExternal Reservoir Tank System:\u003cbr\u003eAllows for higher fluid capacity, allows for increased damper stability while offering a longer piston stroke.\u003cbr\u003e\u003cbr\u003eTriple dampening adjustment:\u003cbr\u003eAllows for professional-grade suspension tuning - 24 steps for high speed compression, 24 steps for low speed compression and 24 steps rebound adjustment.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:27+08:00","created_at":"2018-10-25T23:31:28+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","cusco-japan25","dampening-and-height-adjustable","honda"],"price":417720,"price_min":417720,"price_max":417720,"available":true,"price_varies":false,"compare_at_price":522120,"compare_at_price_min":522120,"compare_at_price_max":522120,"compare_at_price_varies":false,"variants":[{"id":16766375788655,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 64X CB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Sport X Coilover Kit - Honda CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":417720,"weight":26500,"compare_at_price":522120,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-X_bbe26ee9-9c5e-4003-b46b-7a9ff4b2aee9.jpg?v=1571709566"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-X_bbe26ee9-9c5e-4003-b46b-7a9ff4b2aee9.jpg?v=1571709566","options":["Title"],"media":[{"alt":"Cusco Japan - Sport X Coilover Kit - Honda CR-Z ZF1\/ZF2 - 309 64X CB - Rzcrewgarage","id":1287588118639,"position":1,"preview_image":{"aspect_ratio":1.667,"height":300,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-X_bbe26ee9-9c5e-4003-b46b-7a9ff4b2aee9.jpg?v=1571709566"},"aspect_ratio":1.667,"height":300,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-X_bbe26ee9-9c5e-4003-b46b-7a9ff4b2aee9.jpg?v=1571709566","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 64X CB\u003cbr\u003eType: Sport X Ref 309 64X CB\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -55 to 0 ? -60 to -35\u003cbr\u003eMaximum adjustment F\/R: - ? -\u003cbr\u003eSpring Rates (Kg): 10 or (7\/8\/9\/11\/12\/14)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Aluminum spacer\u003cbr\u003eSpring Rates (Kg): 9 or (6\/7\/8\/10\/11\/12)\u003cbr\u003eOptions: front camber is adjustable \u003cbr\u003eAdditional Infos: Auto Levelizer Adjust Rod?-\u003cbr\u003e\u003cbr\u003e The SPORT X are racing coilovers by excellence. With 3 way dampening adjustment, these coilovers will allow you to shave fractions of seconds off your best times, putting you ahead of the competition.\u003cbr\u003eThese coilovers are developped to be used with track compound tyres.\u003cbr\u003eExternal Reservoir Tank System:\u003cbr\u003eAllows for higher fluid capacity, allows for increased damper stability while offering a longer piston stroke.\u003cbr\u003e\u003cbr\u003eTriple dampening adjustment:\u003cbr\u003eAllows for professional-grade suspension tuning - 24 steps for high speed compression, 24 steps for low speed compression and 24 steps rebound adjustment.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Sport X Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 64X CB - Rzcrewgarage

Cusco Japan - Sport X Coilover Kit - Honda CR-Z ZF1/ZF2

€4.177,20

Specifications:Manufacturer: Cusco JapanPart Number: 309 64X CBType: Sport X Ref 309 64X CBFront Specs: 24 steps Full-length AdjustableRecommended Height F/R: -55 to 0 ? -60 to -35Maximum adjustment F/R: - ? -Spring Rates (Kg): 10 or (7/8/9/11/12/14)Rear Specs: 24 steps Aluminum spacerSpring Rates (Kg): 9 or (6/7/8/10/11/12)Options: front camber...


More Info
20% OFF
Cusco Japan - Street A Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 62J CB - Rzcrewgarage
{"id":1778150506607,"title":"Cusco Japan - Street A Coilover Kit - Honda CR-Z ZF1\/ZF2","handle":"cusco-japan-street-a-coilover-kit-honda-cr-z-zf1-zf2-309-62j-cb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 62J CB\u003cbr\u003eType: Street A Ref 309 62J CB\u003cbr\u003eFront Specs: 40 steps Concentric\u003cbr\u003eRecommended Height F\/R: -50 to -30 ? -55 to -25\u003cbr\u003eMaximum adjustment F\/R: -70 to -30 ? -56 to -25\u003cbr\u003eSpring Rates (Kg): 6 or (7\/8)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 4 or (3.5\/5\/6)\u003cbr\u003eOptions: e-con2Product Code?00B 60J 1212 \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The STREET-A series suspension coilover system is designed to provide a lowered vehicle ride height while enabling damper adjustability. The newly developed 40 way damper adjustable shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition. *8 way rear dampers on selected models. \u003cbr\u003e\u003cbr\u003eThis suspension coilover is perfect for those who want a wide range of shock dampening adjustment but do not often take their vehicles to the race track. The standard coilover design enables this kit to be priced significantly lower than our full height adjustable systems.\u003cbr\u003e \u003cbr\u003eConbined with the ECON2 unit (sold separately), the damper rate can be adjusted from the drivers seat with a single touch of a button. Factory upper mounts are re-used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e40 way adjustable needle valve shock absorber with redesigned base valve \u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eStandard coilover structure\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:14+08:00","created_at":"2018-10-25T23:31:16+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","cusco-japan25","dampening-and-height-adjustable","honda"],"price":156240,"price_min":156240,"price_max":156240,"available":true,"price_varies":false,"compare_at_price":195360,"compare_at_price_min":195360,"compare_at_price_max":195360,"compare_at_price_varies":false,"variants":[{"id":16766372741231,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 62J CB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street A Coilover Kit - Honda CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":156240,"weight":26500,"compare_at_price":195360,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-A_3a630e1c-f91c-446a-acaf-d93fdab0a54b.jpg?v=1571709566"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-A_3a630e1c-f91c-446a-acaf-d93fdab0a54b.jpg?v=1571709566","options":["Title"],"media":[{"alt":"Cusco Japan - Street A Coilover Kit - Honda CR-Z ZF1\/ZF2 - 309 62J CB - Rzcrewgarage","id":1287587823727,"position":1,"preview_image":{"aspect_ratio":1.638,"height":552,"width":904,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-A_3a630e1c-f91c-446a-acaf-d93fdab0a54b.jpg?v=1571709566"},"aspect_ratio":1.638,"height":552,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-A_3a630e1c-f91c-446a-acaf-d93fdab0a54b.jpg?v=1571709566","width":904}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 62J CB\u003cbr\u003eType: Street A Ref 309 62J CB\u003cbr\u003eFront Specs: 40 steps Concentric\u003cbr\u003eRecommended Height F\/R: -50 to -30 ? -55 to -25\u003cbr\u003eMaximum adjustment F\/R: -70 to -30 ? -56 to -25\u003cbr\u003eSpring Rates (Kg): 6 or (7\/8)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 4 or (3.5\/5\/6)\u003cbr\u003eOptions: e-con2Product Code?00B 60J 1212 \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The STREET-A series suspension coilover system is designed to provide a lowered vehicle ride height while enabling damper adjustability. The newly developed 40 way damper adjustable shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition. *8 way rear dampers on selected models. \u003cbr\u003e\u003cbr\u003eThis suspension coilover is perfect for those who want a wide range of shock dampening adjustment but do not often take their vehicles to the race track. The standard coilover design enables this kit to be priced significantly lower than our full height adjustable systems.\u003cbr\u003e \u003cbr\u003eConbined with the ECON2 unit (sold separately), the damper rate can be adjusted from the drivers seat with a single touch of a button. Factory upper mounts are re-used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e40 way adjustable needle valve shock absorber with redesigned base valve \u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eStandard coilover structure\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Street A Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 62J CB - Rzcrewgarage

Cusco Japan - Street A Coilover Kit - Honda CR-Z ZF1/ZF2

€1.562,40

Specifications:Manufacturer: Cusco JapanPart Number: 309 62J CBType: Street A Ref 309 62J CBFront Specs: 40 steps ConcentricRecommended Height F/R: -50 to -30 ? -55 to -25Maximum adjustment F/R: -70 to -30 ? -56 to -25Spring Rates (Kg): 6 or (7/8)Rear Specs: 40 steps Threaded spacerSpring Rates (Kg): 4 or (3.5/5/6)Options: e-con2Product Code?00B...


More Info
19% OFF
Cusco Japan - Street Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 62K CBF - Rzcrewgarage
{"id":1778150375535,"title":"Cusco Japan - Street Coilover Kit - Honda CR-Z ZF1\/ZF2","handle":"cusco-japan-street-coilover-kit-honda-cr-z-zf1-zf2-309-62k-cbf","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 62K CBF\u003cbr\u003eType: Street Ref 309 62K CBF\u003cbr\u003eFront Specs: - Concentric\u003cbr\u003eRecommended Height F\/R: -45 to -25 ? -40 to -20\u003cbr\u003eMaximum adjustment F\/R: -45 to 0 ? -53 to -19\u003cbr\u003eSpring Rates (Kg): 6 or (7\/8)\u003cbr\u003e\u003cbr\u003eRear Specs: 14 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 4 or (3.5\/5\/6)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The Cusco STREET series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is made as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at the lowest price.\u003cbr\u003e\n\u003cbr\u003e\nThe newly developed twin tubeshock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models.\n\u003cbr\u003e\nFactory upper mounts are re-used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback. Each coilover suspension is specially valved and dimensionally designed per vehicle application.\u003cbr\u003e\u003cbr\u003e\nLow compression twin-tube shock absorber w\/ redesigned base valve\u003cbr\u003e\nComfortable damper rate at any given vehicle height\u003cbr\u003e\nPrecision cut shock case thread with special coating\u003cbr\u003e\nQuiet operation\u003cbr\u003e\nRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003e\nEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e\n8 way rear adjustable shocks included with some models\u003cbr\u003e\nCUSCO’s most a ffordable street suspension system\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:12+08:00","created_at":"2018-10-25T23:31:13+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","cusco-japan25","height-adjustable","honda"],"price":133680,"price_min":133680,"price_max":133680,"available":true,"price_varies":false,"compare_at_price":167040,"compare_at_price_min":167040,"compare_at_price_max":167040,"compare_at_price_varies":false,"variants":[{"id":16766372610159,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 62K CBF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Coilover Kit - Honda CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":133680,"weight":26500,"compare_at_price":167040,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street_2db763b6-9fb4-437f-bf52-e1d8752159fa.jpg?v=1571709566"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street_2db763b6-9fb4-437f-bf52-e1d8752159fa.jpg?v=1571709566","options":["Title"],"media":[{"alt":"Cusco Japan - Street Coilover Kit - Honda CR-Z ZF1\/ZF2 - 309 62K CBF - Rzcrewgarage","id":1287587725423,"position":1,"preview_image":{"aspect_ratio":1.635,"height":540,"width":883,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street_2db763b6-9fb4-437f-bf52-e1d8752159fa.jpg?v=1571709566"},"aspect_ratio":1.635,"height":540,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street_2db763b6-9fb4-437f-bf52-e1d8752159fa.jpg?v=1571709566","width":883}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 62K CBF\u003cbr\u003eType: Street Ref 309 62K CBF\u003cbr\u003eFront Specs: - Concentric\u003cbr\u003eRecommended Height F\/R: -45 to -25 ? -40 to -20\u003cbr\u003eMaximum adjustment F\/R: -45 to 0 ? -53 to -19\u003cbr\u003eSpring Rates (Kg): 6 or (7\/8)\u003cbr\u003e\u003cbr\u003eRear Specs: 14 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 4 or (3.5\/5\/6)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The Cusco STREET series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is made as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at the lowest price.\u003cbr\u003e\n\u003cbr\u003e\nThe newly developed twin tubeshock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models.\n\u003cbr\u003e\nFactory upper mounts are re-used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback. Each coilover suspension is specially valved and dimensionally designed per vehicle application.\u003cbr\u003e\u003cbr\u003e\nLow compression twin-tube shock absorber w\/ redesigned base valve\u003cbr\u003e\nComfortable damper rate at any given vehicle height\u003cbr\u003e\nPrecision cut shock case thread with special coating\u003cbr\u003e\nQuiet operation\u003cbr\u003e\nRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003e\nEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e\n8 way rear adjustable shocks included with some models\u003cbr\u003e\nCUSCO’s most a ffordable street suspension system\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Street Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 62K CBF - Rzcrewgarage

Cusco Japan - Street Coilover Kit - Honda CR-Z ZF1/ZF2

€1.336,80

Specifications:Manufacturer: Cusco JapanPart Number: 309 62K CBFType: Street Ref 309 62K CBFFront Specs: - ConcentricRecommended Height F/R: -45 to -25 ? -40 to -20Maximum adjustment F/R: -45 to 0 ? -53 to -19Spring Rates (Kg): 6 or (7/8)Rear Specs: 14 steps Threaded spacerSpring Rates (Kg): 4 or (3.5/5/6)Options: Additional Infos: The Cusco ST...


More Info
20% OFF
Cusco Japan - Street Zero A Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 62N CB - Rzcrewgarage
{"id":1778150735983,"title":"Cusco Japan - Street Zero A Coilover Kit - Honda CR-Z ZF1\/ZF2","handle":"cusco-japan-street-zero-a-coilover-kit-honda-cr-z-zf1-zf2-309-62n-cb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 62N CB\u003cbr\u003eType: Cusco Street Zero A Ref 309 62N CB\u003cbr\u003eFront Specs: 40 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -45 to -10 ? -40 to -19\u003cbr\u003eMaximum adjustment F\/R: -45 to 0 ? -53 to -19\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 4 or (3.5\/5\/6)\u003cbr\u003eOptions: Adjustable front camber available, Used optional bracket : Request at order \u003cbr\u003eAdditional Infos: e-con2Product Code?00B 60J 1212\u003cbr\u003e\u003cbr\u003e The Street ZERO-A features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.\u003cbr\u003eFactory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.\u003cbr\u003e\u003cbr\u003eEach coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient \"comfort\" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button. (via Econ2). \u003cbr\u003e\u003cbr\u003eCPRV Internal Pressure Valve Technology\u003cbr\u003eA pressure dependant bypass is designed at the base of the damper rod where the amount of hydraulic fluid passes through is automatically compensated for the perfect dampening rate. This feature serves vital when the dampening approaches a dangerously low level typically experienced at the low and mid shock dampening rate. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e\u003cbr\u003e40 way adjustable needle valve shock absorber w\/ CPRV base valve\u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eFull height adjustable structure, for full shock stroke capabilities\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with different metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:21+08:00","created_at":"2018-10-25T23:31:22+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","cusco-japan25","dampening-and-height-adjustable","honda"],"price":173040,"price_min":173040,"price_max":173040,"available":true,"price_varies":false,"compare_at_price":216360,"compare_at_price_min":216360,"compare_at_price_max":216360,"compare_at_price_varies":false,"variants":[{"id":16766373986415,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 62N CB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Zero A Coilover Kit - Honda CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":173040,"weight":26500,"compare_at_price":216360,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_4d54a511-2036-42d8-82a8-98303e213ea5.jpg?v=1571709566"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_4d54a511-2036-42d8-82a8-98303e213ea5.jpg?v=1571709566","options":["Title"],"media":[{"alt":"Cusco Japan - Street Zero A Coilover Kit - Honda CR-Z ZF1\/ZF2 - 309 62N CB - Rzcrewgarage","id":1287587954799,"position":1,"preview_image":{"aspect_ratio":1.645,"height":1084,"width":1783,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_4d54a511-2036-42d8-82a8-98303e213ea5.jpg?v=1571709566"},"aspect_ratio":1.645,"height":1084,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_4d54a511-2036-42d8-82a8-98303e213ea5.jpg?v=1571709566","width":1783}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 62N CB\u003cbr\u003eType: Cusco Street Zero A Ref 309 62N CB\u003cbr\u003eFront Specs: 40 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -45 to -10 ? -40 to -19\u003cbr\u003eMaximum adjustment F\/R: -45 to 0 ? -53 to -19\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 4 or (3.5\/5\/6)\u003cbr\u003eOptions: Adjustable front camber available, Used optional bracket : Request at order \u003cbr\u003eAdditional Infos: e-con2Product Code?00B 60J 1212\u003cbr\u003e\u003cbr\u003e The Street ZERO-A features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.\u003cbr\u003eFactory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.\u003cbr\u003e\u003cbr\u003eEach coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient \"comfort\" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button. (via Econ2). \u003cbr\u003e\u003cbr\u003eCPRV Internal Pressure Valve Technology\u003cbr\u003eA pressure dependant bypass is designed at the base of the damper rod where the amount of hydraulic fluid passes through is automatically compensated for the perfect dampening rate. This feature serves vital when the dampening approaches a dangerously low level typically experienced at the low and mid shock dampening rate. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e\u003cbr\u003e40 way adjustable needle valve shock absorber w\/ CPRV base valve\u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eFull height adjustable structure, for full shock stroke capabilities\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with different metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Street Zero A Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 62N CB - Rzcrewgarage

Cusco Japan - Street Zero A Coilover Kit - Honda CR-Z ZF1/ZF2

€1.730,40

Specifications:Manufacturer: Cusco JapanPart Number: 309 62N CBType: Cusco Street Zero A Ref 309 62N CBFront Specs: 40 steps Full-length AdjustableRecommended Height F/R: -45 to -10 ? -40 to -19Maximum adjustment F/R: -45 to 0 ? -53 to -19Spring Rates (Kg): 6 or (5/7/8/9)Rear Specs: 40 steps Threaded spacerSpring Rates (Kg): 4 or (3.5/5/6)Option...


More Info
20% OFF
Cusco Japan - Street Zero Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 62P CBF - Rzcrewgarage
{"id":1778150604911,"title":"Cusco Japan - Street Zero Coilover Kit - Honda CR-Z ZF1\/ZF2","handle":"cusco-japan-street-zero-coilover-kit-honda-cr-z-zf1-zf2-309-62p-cbf","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 62P CBF\u003cbr\u003eType: Street Zero Ref 309 62P CBF\u003cbr\u003eFront Specs: - Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -45 to -10 ? -40 to -19\u003cbr\u003eMaximum adjustment F\/R: -45 to -0 ? -53 to -19\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9)\u003cbr\u003e\u003cbr\u003eRear Specs: - Threaded spacer\u003cbr\u003eSpring Rates (Kg): 4 or (3.5\/5\/6)\u003cbr\u003eOptions: Adjustable front camber available, Used optional bracket : Request at order \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The STREET ZERO series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is designed as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at a competitive price point.\u003cbr\u003e\u003cbr\u003eThe newly developed twin tube shock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models. This suspension coilover basically is a full ride height adjustable system where the shock absorber stroke and spring pre-load rate is retained no matter what the vehicle ride height is set at.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eLow compression twin-tube shock absorber with redesigned base valve\u003cbr\u003eFull height adjustable structure \u0026amp; fixed damper set at most ideal rate\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:17+08:00","created_at":"2018-10-25T23:31:19+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","cusco-japan25","height-adjustable","honda"],"price":155280,"price_min":155280,"price_max":155280,"available":true,"price_varies":false,"compare_at_price":194160,"compare_at_price_min":194160,"compare_at_price_max":194160,"compare_at_price_varies":false,"variants":[{"id":16766373560431,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309 62P CBF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Zero Coilover Kit - Honda CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":155280,"weight":26500,"compare_at_price":194160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_fb27d637-99c9-4bd7-885a-08b88394ef5b.jpg?v=1571709566"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_fb27d637-99c9-4bd7-885a-08b88394ef5b.jpg?v=1571709566","options":["Title"],"media":[{"alt":"Cusco Japan - Street Zero Coilover Kit - Honda CR-Z ZF1\/ZF2 - 309 62P CBF - Rzcrewgarage","id":1287587889263,"position":1,"preview_image":{"aspect_ratio":1.644,"height":1084,"width":1782,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_fb27d637-99c9-4bd7-885a-08b88394ef5b.jpg?v=1571709566"},"aspect_ratio":1.644,"height":1084,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_fb27d637-99c9-4bd7-885a-08b88394ef5b.jpg?v=1571709566","width":1782}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 309 62P CBF\u003cbr\u003eType: Street Zero Ref 309 62P CBF\u003cbr\u003eFront Specs: - Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -45 to -10 ? -40 to -19\u003cbr\u003eMaximum adjustment F\/R: -45 to -0 ? -53 to -19\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9)\u003cbr\u003e\u003cbr\u003eRear Specs: - Threaded spacer\u003cbr\u003eSpring Rates (Kg): 4 or (3.5\/5\/6)\u003cbr\u003eOptions: Adjustable front camber available, Used optional bracket : Request at order \u003cbr\u003eAdditional Infos: \u003cbr\u003e\u003cbr\u003e The STREET ZERO series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is designed as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at a competitive price point.\u003cbr\u003e\u003cbr\u003eThe newly developed twin tube shock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models. This suspension coilover basically is a full ride height adjustable system where the shock absorber stroke and spring pre-load rate is retained no matter what the vehicle ride height is set at.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eLow compression twin-tube shock absorber with redesigned base valve\u003cbr\u003eFull height adjustable structure \u0026amp; fixed damper set at most ideal rate\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Street Zero Coilover Kit - Honda CR-Z ZF1/ZF2 - 309 62P CBF - Rzcrewgarage

Cusco Japan - Street Zero Coilover Kit - Honda CR-Z ZF1/ZF2

€1.552,80

Specifications:Manufacturer: Cusco JapanPart Number: 309 62P CBFType: Street Zero Ref 309 62P CBFFront Specs: - Full-length AdjustableRecommended Height F/R: -45 to -10 ? -40 to -19Maximum adjustment F/R: -45 to -0 ? -53 to -19Spring Rates (Kg): 6 or (5/7/8/9)Rear Specs: - Threaded spacerSpring Rates (Kg): 4 or (3.5/5/6)Options: Adjustable front...


More Info
7% OFF
Cusco Japan Type Rs - 1 way(1 & 1.5way)   Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 C
{"id":6951996063855,"title":"Cusco Japan Type Rs - 1 way(1 \u0026 1.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","handle":"cusco-japan-type-rs-1-way1-1-5way-front-lsd-honda-cr-z-zf1-zf2-mt-zf1-zf2-lsd-310-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 C\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1 way(1 \u0026amp; 1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-18T16:01:45+08:00","created_at":"2022-02-18T16:01:46+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","2010","2011","2012","2013","2014","2015","2016","2017","2018","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","front","honda","limited-slip-diffs","mt","tva","ws123"],"price":120360,"price_min":120360,"price_max":120360,"available":true,"price_varies":false,"compare_at_price":130800,"compare_at_price_min":130800,"compare_at_price_max":130800,"compare_at_price_varies":false,"variants":[{"id":40750140194927,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 310 C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 1 way(1 \u0026 1.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","public_title":null,"options":["Default Title"],"price":120360,"weight":10000,"compare_at_price":130800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_f61d524f-d43b-476e-b16c-79f59efc1e5a.jpg?v=1660711331"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_f61d524f-d43b-476e-b16c-79f59efc1e5a.jpg?v=1660711331","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 1 way(1 \u0026 1.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT) - ZF1\/ZF2 - LSD 310 C","id":23781706039407,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_f61d524f-d43b-476e-b16c-79f59efc1e5a.jpg?v=1660711331"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_f61d524f-d43b-476e-b16c-79f59efc1e5a.jpg?v=1660711331","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 C\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1 way(1 \u0026amp; 1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Rs - 1 way(1 & 1.5way)   Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 C

Cusco Japan Type Rs - 1 way(1 & 1.5way) Front LSD - Honda CR-Z - ZF1/ZF2 (MT)

€1.203,60

Specifications:Manufacturer: Cusco JapanPart Number: LSD 310 CLSD Model: Type RsLSD Type: 1 way(1 & 1.5way) Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reac...


More Info
7% OFF
Cusco Japan Type Rs - 1.5way(1&1.5way)   Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 C15
{"id":6951996096623,"title":"Cusco Japan Type Rs - 1.5way(1\u00261.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","handle":"cusco-japan-type-rs-1-5way1-1-5way-front-lsd-honda-cr-z-zf1-zf2-mt-zf1-zf2-lsd-310-c15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 C15\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1.5way(1\u0026amp;1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-18T16:01:47+08:00","created_at":"2022-02-18T16:01:47+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","2010","2011","2012","2013","2014","2015","2016","2017","2018","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","front","honda","limited-slip-diffs","mt","tva","ws123"],"price":120360,"price_min":120360,"price_max":120360,"available":true,"price_varies":false,"compare_at_price":130800,"compare_at_price_min":130800,"compare_at_price_max":130800,"compare_at_price_varies":false,"variants":[{"id":40750140227695,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 310 C15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 1.5way(1\u00261.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","public_title":null,"options":["Default Title"],"price":120360,"weight":10000,"compare_at_price":130800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_7018b2f4-2e8f-46ae-ad80-fdb4b3645c05.jpg?v=1660711337"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_7018b2f4-2e8f-46ae-ad80-fdb4b3645c05.jpg?v=1660711337","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 1.5way(1\u00261.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT) - ZF1\/ZF2 - LSD 310 C15","id":23781706760303,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_7018b2f4-2e8f-46ae-ad80-fdb4b3645c05.jpg?v=1660711337"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_7018b2f4-2e8f-46ae-ad80-fdb4b3645c05.jpg?v=1660711337","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 C15\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1.5way(1\u0026amp;1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Rs - 1.5way(1&1.5way)   Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 C15

Cusco Japan Type Rs - 1.5way(1&1.5way) Front LSD - Honda CR-Z - ZF1/ZF2 (MT)

€1.203,60

Specifications:Manufacturer: Cusco JapanPart Number: LSD 310 C15LSD Model: Type RsLSD Type: 1.5way(1&1.5way) Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly rea...


More Info
7% OFF
Cusco Japan Type Rs - 1way   Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 F
{"id":6951996031087,"title":"Cusco Japan Type Rs - 1way Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","handle":"cusco-japan-type-rs-1way-front-lsd-honda-cr-z-zf1-zf2-mt-zf1-zf2-lsd-310-f","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 F\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1way \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-18T16:01:43+08:00","created_at":"2022-02-18T16:01:44+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","2010","2011","2012","2013","2014","2015","2016","2017","2018","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","front","honda","limited-slip-diffs","mt","tva","ws123"],"price":120360,"price_min":120360,"price_max":120360,"available":true,"price_varies":false,"compare_at_price":130800,"compare_at_price_min":130800,"compare_at_price_max":130800,"compare_at_price_varies":false,"variants":[{"id":40750140162159,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 310 F","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 1way Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","public_title":null,"options":["Default Title"],"price":120360,"weight":10000,"compare_at_price":130800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_83ffd07f-78c1-411f-b648-833c87231987.jpg?v=1660711330"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_83ffd07f-78c1-411f-b648-833c87231987.jpg?v=1660711330","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 1way Front LSD - Honda CR-Z - ZF1\/ZF2 (MT) - ZF1\/ZF2 - LSD 310 F","id":23781705973871,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_83ffd07f-78c1-411f-b648-833c87231987.jpg?v=1660711330"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_83ffd07f-78c1-411f-b648-833c87231987.jpg?v=1660711330","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 F\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1way \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Rs - 1way   Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 F

Cusco Japan Type Rs - 1way Front LSD - Honda CR-Z - ZF1/ZF2 (MT)

€1.203,60

Specifications:Manufacturer: Cusco JapanPart Number: LSD 310 FLSD Model: Type RsLSD Type: 1way Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure l...


More Info
7% OFF
Cusco Japan Type Rs Spec F - 1 way(1 & 1.5way)    Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 CT
{"id":6951996162159,"title":"Cusco Japan Type Rs Spec F - 1 way(1 \u0026 1.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","handle":"cusco-japan-type-rs-spec-f-1-way1-1-5way-front-lsd-honda-cr-z-zf1-zf2-mt-zf1-zf2-lsd-310-ct","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 CT\u003cbr\u003eLSD Model: Type Rs Spec F\u003cbr\u003eLSD Type: 1 way(1 \u0026amp; 1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-18T16:01:50+08:00","created_at":"2022-02-18T16:01:50+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","2010","2011","2012","2013","2014","2015","2016","2017","2018","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","front","honda","limited-slip-diffs","mt","tva","ws123"],"price":120360,"price_min":120360,"price_max":120360,"available":true,"price_varies":false,"compare_at_price":130800,"compare_at_price_min":130800,"compare_at_price_max":130800,"compare_at_price_varies":false,"variants":[{"id":40750140293231,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 310 CT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs Spec F - 1 way(1 \u0026 1.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","public_title":null,"options":["Default Title"],"price":120360,"weight":10000,"compare_at_price":130800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_52906ebc-c5f7-462c-b0d7-e15ba1d18742.jpg?v=1660711340"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_52906ebc-c5f7-462c-b0d7-e15ba1d18742.jpg?v=1660711340","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs Spec F - 1 way(1 \u0026 1.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT) - ZF1\/ZF2 - LSD 310 CT","id":23781707186287,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_52906ebc-c5f7-462c-b0d7-e15ba1d18742.jpg?v=1660711340"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_52906ebc-c5f7-462c-b0d7-e15ba1d18742.jpg?v=1660711340","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 CT\u003cbr\u003eLSD Model: Type Rs Spec F\u003cbr\u003eLSD Type: 1 way(1 \u0026amp; 1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Rs Spec F - 1 way(1 & 1.5way)    Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 CT

Cusco Japan Type Rs Spec F - 1 way(1 & 1.5way) Front LSD - Honda CR-Z - ZF1/ZF2 (MT)

€1.203,60

Specifications:Manufacturer: Cusco JapanPart Number: LSD 310 CTLSD Model: Type Rs Spec FLSD Type: 1 way(1 & 1.5way) Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when accel...


More Info
7% OFF
Cusco Japan Type Rs Spec F - 1.5way(1&1.5way)    Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 CT15
{"id":6951996194927,"title":"Cusco Japan Type Rs Spec F - 1.5way(1\u00261.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","handle":"cusco-japan-type-rs-spec-f-1-5way1-1-5way-front-lsd-honda-cr-z-zf1-zf2-mt-zf1-zf2-lsd-310-ct15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 CT15\u003cbr\u003eLSD Model: Type Rs Spec F\u003cbr\u003eLSD Type: 1.5way(1\u0026amp;1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-18T16:01:51+08:00","created_at":"2022-02-18T16:01:52+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","2010","2011","2012","2013","2014","2015","2016","2017","2018","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","front","honda","limited-slip-diffs","mt","tva","ws123"],"price":120360,"price_min":120360,"price_max":120360,"available":true,"price_varies":false,"compare_at_price":130800,"compare_at_price_min":130800,"compare_at_price_max":130800,"compare_at_price_varies":false,"variants":[{"id":40750140325999,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 310 CT15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs Spec F - 1.5way(1\u00261.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","public_title":null,"options":["Default Title"],"price":120360,"weight":10000,"compare_at_price":130800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_5fe7a78a-55bf-4b09-a072-cc1f32f6dcbd.jpg?v=1660711342"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_5fe7a78a-55bf-4b09-a072-cc1f32f6dcbd.jpg?v=1660711342","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs Spec F - 1.5way(1\u00261.5way) Front LSD - Honda CR-Z - ZF1\/ZF2 (MT) - ZF1\/ZF2 - LSD 310 CT15","id":23781707219055,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_5fe7a78a-55bf-4b09-a072-cc1f32f6dcbd.jpg?v=1660711342"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_5fe7a78a-55bf-4b09-a072-cc1f32f6dcbd.jpg?v=1660711342","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 CT15\u003cbr\u003eLSD Model: Type Rs Spec F\u003cbr\u003eLSD Type: 1.5way(1\u0026amp;1.5way) \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Rs Spec F - 1.5way(1&1.5way)    Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 CT15

Cusco Japan Type Rs Spec F - 1.5way(1&1.5way) Front LSD - Honda CR-Z - ZF1/ZF2 (MT)

€1.203,60

Specifications:Manufacturer: Cusco JapanPart Number: LSD 310 CT15LSD Model: Type Rs Spec FLSD Type: 1.5way(1&1.5way) Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acce...


More Info
7% OFF
Cusco Japan Type Rs Spec F - 1way    Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 FT
{"id":6951996129391,"title":"Cusco Japan Type Rs Spec F - 1way Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","handle":"cusco-japan-type-rs-spec-f-1way-front-lsd-honda-cr-z-zf1-zf2-mt-zf1-zf2-lsd-310-ft","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 FT\u003cbr\u003eLSD Model: Type Rs Spec F\u003cbr\u003eLSD Type: 1way \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-18T16:01:48+08:00","created_at":"2022-02-18T16:01:49+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","2010","2011","2012","2013","2014","2015","2016","2017","2018","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","cusco-japan","front","honda","limited-slip-diffs","mt","tva","ws123"],"price":120360,"price_min":120360,"price_max":120360,"available":true,"price_varies":false,"compare_at_price":130800,"compare_at_price_min":130800,"compare_at_price_max":130800,"compare_at_price_varies":false,"variants":[{"id":40750140260463,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 310 FT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs Spec F - 1way Front LSD - Honda CR-Z - ZF1\/ZF2 (MT)","public_title":null,"options":["Default Title"],"price":120360,"weight":10000,"compare_at_price":130800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_9d2f1bf9-02bc-41c7-93ff-354dad7d66b1.jpg?v=1660711339"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_9d2f1bf9-02bc-41c7-93ff-354dad7d66b1.jpg?v=1660711339","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs Spec F - 1way Front LSD - Honda CR-Z - ZF1\/ZF2 (MT) - ZF1\/ZF2 - LSD 310 FT","id":23781706825839,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_9d2f1bf9-02bc-41c7-93ff-354dad7d66b1.jpg?v=1660711339"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_9d2f1bf9-02bc-41c7-93ff-354dad7d66b1.jpg?v=1660711339","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 310 FT\u003cbr\u003eLSD Model: Type Rs Spec F\u003cbr\u003eLSD Type: 1way \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}
Cusco Japan Type Rs Spec F - 1way    Front LSD - Honda CR-Z - ZF1/ZF2 (MT) - ZF1/ZF2 - LSD 310 FT

Cusco Japan Type Rs Spec F - 1way Front LSD - Honda CR-Z - ZF1/ZF2 (MT)

€1.203,60

Specifications:Manufacturer: Cusco JapanPart Number: LSD 310 FTLSD Model: Type Rs Spec FLSD Type: 1way Transmission Type: MTPosition: FrontIMPORTANT: Read the fitting tab to ensure this part fits on your car!!The Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or ...


More Info