{"id":3973275418735,"title":"Fujitsubo - Super Ti Exhaust system - Honda - NSX NA1","handle":"fujitsubo-super-ti-exhaust-system-honda-nsx-na1-na1-160-55503","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Fujitsubo\u003cbr\u003eReference Number: 160-55503\u003cbr\u003eExhaust Type: Exhaust system\u003cbr\u003eMaterial Used: Titanium\u003cbr\u003e\u003cbr\u003eSuper Ti is Fujitsubo's premier exhaust system. It features full titanium construction, large diameter mandrel piping, and high flow muffler. Each Super Ti kit is developed for optimum horsepower while greatly reducing weight. For a Mitsubishi EVO 9 application the Super Ti was 60% lighter in weight than OE, a difference of 21 lbs. The reduced weight will benefit all aspects of vehicle performance including acceleration, braking, and handling. The goal in development is to increase power throughout the RPM range with an emphasis on high RPM power. All components are made of titanium from tip, muffler, resonators, piping, brackets, and hangers.\u003cbr\u003e\u003cbr\u003eSuper lightweight Titanium construction with a straight through muffler design. Developed to be high flow with an aggressive exhaust note. The compact round shaped muffler and large diameter tip are designed to pursue exhaust efficiency and at the same time reduce sound to acceptable limits. Slashed and straight tip designs are available to offer a sharp feeling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from Japanese Warehouse to our French Warehouse and redistributed in Europe!\u003cbr\u003ePlease note that certain countries such as UK and Switzerland may incur additional taxes on arrival. Please check with your local authorities. Rzcrew Trading Pte Ltd will not bear any responsibility about it. Feel free to contact us if necessary.Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNSX | NA1 | 1990-2005 | NA | C30A | V6\u003c!--split--\u003e","published_at":"2019-09-11T16:59:01+08:00","created_at":"2019-09-11T16:59:03+08:00","vendor":"Fujitsubo","type":"Catbacks - Exhaust Manifolds","tags":["1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","catbacks-exhaust-manifolds","exhaust-system","fujitsubo","honda","NA1","nsx-na1-1990-2005-na-c30a-v6","titanium","ws114"],"price":740532,"price_min":740532,"price_max":740532,"available":true,"price_varies":false,"compare_at_price":878760,"compare_at_price_min":878760,"compare_at_price_max":878760,"compare_at_price_varies":false,"variants":[{"id":29557087961199,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"160-55503","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fujitsubo - Super Ti Exhaust system - Honda - NSX NA1","public_title":null,"options":["Default Title"],"price":740532,"weight":60000,"compare_at_price":878760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/160-55503_c5779b0d-6df2-4de7-a182-a6b689bf523d.jpg?v=1677232414"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/160-55503_c5779b0d-6df2-4de7-a182-a6b689bf523d.jpg?v=1677232414","options":["Title"],"media":[{"alt":"Fujitsubo - Super Ti Exhaust system - Honda - NSX NA1 - NA1 - 160-55503","id":33085252829459,"position":1,"preview_image":{"aspect_ratio":2.208,"height":640,"width":1413,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/160-55503_c5779b0d-6df2-4de7-a182-a6b689bf523d.jpg?v=1677232414"},"aspect_ratio":2.208,"height":640,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/160-55503_c5779b0d-6df2-4de7-a182-a6b689bf523d.jpg?v=1677232414","width":1413}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Fujitsubo\u003cbr\u003eReference Number: 160-55503\u003cbr\u003eExhaust Type: Exhaust system\u003cbr\u003eMaterial Used: Titanium\u003cbr\u003e\u003cbr\u003eSuper Ti is Fujitsubo's premier exhaust system. It features full titanium construction, large diameter mandrel piping, and high flow muffler. Each Super Ti kit is developed for optimum horsepower while greatly reducing weight. For a Mitsubishi EVO 9 application the Super Ti was 60% lighter in weight than OE, a difference of 21 lbs. The reduced weight will benefit all aspects of vehicle performance including acceleration, braking, and handling. The goal in development is to increase power throughout the RPM range with an emphasis on high RPM power. All components are made of titanium from tip, muffler, resonators, piping, brackets, and hangers.\u003cbr\u003e\u003cbr\u003eSuper lightweight Titanium construction with a straight through muffler design. Developed to be high flow with an aggressive exhaust note. The compact round shaped muffler and large diameter tip are designed to pursue exhaust efficiency and at the same time reduce sound to acceptable limits. Slashed and straight tip designs are available to offer a sharp feeling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from Japanese Warehouse to our French Warehouse and redistributed in Europe!\u003cbr\u003ePlease note that certain countries such as UK and Switzerland may incur additional taxes on arrival. Please check with your local authorities. Rzcrew Trading Pte Ltd will not bear any responsibility about it. Feel free to contact us if necessary.Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNSX | NA1 | 1990-2005 | NA | C30A | V6\u003c!--split--\u003e"}

{"id":3973275287663,"title":"Fujitsubo - Super Ti Exhaust system - Mazda - RX-7 FD3S All Type","handle":"fujitsubo-super-ti-exhaust-system-mazda-rx-7-fd3s-all-type-fd3s-all-type-480-45041","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Fujitsubo\u003cbr\u003eReference Number: 480-45041\u003cbr\u003eExhaust Type: Exhaust system\u003cbr\u003eMaterial Used: Titanium\u003cbr\u003e\u003cbr\u003eSuper Ti is Fujitsubo's premier exhaust system. It features full titanium construction, large diameter mandrel piping, and high flow muffler. Each Super Ti kit is developed for optimum horsepower while greatly reducing weight. For a Mitsubishi EVO 9 application the Super Ti was 60% lighter in weight than OE, a difference of 21 lbs. The reduced weight will benefit all aspects of vehicle performance including acceleration, braking, and handling. The goal in development is to increase power throughout the RPM range with an emphasis on high RPM power. All components are made of titanium from tip, muffler, resonators, piping, brackets, and hangers.\u003cbr\u003e\u003cbr\u003eSuper lightweight Titanium construction with a straight through muffler design. Developed to be high flow with an aggressive exhaust note. The compact round shaped muffler and large diameter tip are designed to pursue exhaust efficiency and at the same time reduce sound to acceptable limits. Slashed and straight tip designs are available to offer a sharp feeling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from Japanese Warehouse to our French Warehouse and redistributed in Europe!\u003cbr\u003ePlease note that certain countries such as UK and Switzerland may incur additional taxes on arrival. Please check with your local authorities. Rzcrew Trading Pte Ltd will not bear any responsibility about it. Feel free to contact us if necessary.Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRX-7 | FD3S TYPE I | 1991-1994 | TT | 13B-REW | R,RX-7 | FD3S TYPE II | 1994-1995 | TT | 13B-REW | R,RX-7 | FD3S TYPE III | 1994-1996 | TT | 13B-REW | R,RX-7 | FD3S TYPE IV | 1996-1998 | TT | 13B-REW | R,RX-7 | FD3S TYPE V | 1999-2000 | TT | 13B-REW | R,RX-7 | FD3S TYPE VI | 2000-2002 | TT | 13B-REW | R\u003c!--split--\u003e","published_at":"2019-09-11T16:58:58+08:00","created_at":"2019-09-11T16:58:59+08:00","vendor":"Fujitsubo","type":"Catbacks - Exhaust Manifolds","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","catbacks-exhaust-manifolds","exhaust-system","FD3S All Type","fujitsubo","mazda","rx-7-fd3s-type-i-1991-1994-tt-13b-rew-r","rx-7-fd3s-type-ii-1994-1995-tt-13b-rew-r","rx-7-fd3s-type-iii-1994-1996-tt-13b-rew-r","rx-7-fd3s-type-iv-1996-1998-tt-13b-rew-r","rx-7-fd3s-type-v-1999-2000-tt-13b-rew-r","rx-7-fd3s-type-vi-2000-2002-tt-13b-rew-r","titanium","ws114"],"price":288564,"price_min":288564,"price_max":288564,"available":true,"price_varies":false,"compare_at_price":323760,"compare_at_price_min":323760,"compare_at_price_max":323760,"compare_at_price_varies":false,"variants":[{"id":29557087830127,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"480-45041","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fujitsubo - Super Ti Exhaust system - Mazda - RX-7 FD3S All Type","public_title":null,"options":["Default Title"],"price":288564,"weight":44000,"compare_at_price":323760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Fujitsubo_Super_Ti_9635c7de-66ec-435e-b4d9-8a9459ecf5ec.jpg?v=1677232412"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Fujitsubo_Super_Ti_9635c7de-66ec-435e-b4d9-8a9459ecf5ec.jpg?v=1677232412","options":["Title"],"media":[{"alt":"Fujitsubo - Super Ti Exhaust system - Mazda - RX-7 FD3S All Type - FD3S All Type - 480-45041","id":33085252469011,"position":1,"preview_image":{"aspect_ratio":2.223,"height":300,"width":667,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Fujitsubo_Super_Ti_9635c7de-66ec-435e-b4d9-8a9459ecf5ec.jpg?v=1677232412"},"aspect_ratio":2.223,"height":300,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Fujitsubo_Super_Ti_9635c7de-66ec-435e-b4d9-8a9459ecf5ec.jpg?v=1677232412","width":667}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Fujitsubo\u003cbr\u003eReference Number: 480-45041\u003cbr\u003eExhaust Type: Exhaust system\u003cbr\u003eMaterial Used: Titanium\u003cbr\u003e\u003cbr\u003eSuper Ti is Fujitsubo's premier exhaust system. It features full titanium construction, large diameter mandrel piping, and high flow muffler. Each Super Ti kit is developed for optimum horsepower while greatly reducing weight. For a Mitsubishi EVO 9 application the Super Ti was 60% lighter in weight than OE, a difference of 21 lbs. The reduced weight will benefit all aspects of vehicle performance including acceleration, braking, and handling. The goal in development is to increase power throughout the RPM range with an emphasis on high RPM power. All components are made of titanium from tip, muffler, resonators, piping, brackets, and hangers.\u003cbr\u003e\u003cbr\u003eSuper lightweight Titanium construction with a straight through muffler design. Developed to be high flow with an aggressive exhaust note. The compact round shaped muffler and large diameter tip are designed to pursue exhaust efficiency and at the same time reduce sound to acceptable limits. Slashed and straight tip designs are available to offer a sharp feeling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from Japanese Warehouse to our French Warehouse and redistributed in Europe!\u003cbr\u003ePlease note that certain countries such as UK and Switzerland may incur additional taxes on arrival. Please check with your local authorities. Rzcrew Trading Pte Ltd will not bear any responsibility about it. Feel free to contact us if necessary.Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRX-7 | FD3S TYPE I | 1991-1994 | TT | 13B-REW | R,RX-7 | FD3S TYPE II | 1994-1995 | TT | 13B-REW | R,RX-7 | FD3S TYPE III | 1994-1996 | TT | 13B-REW | R,RX-7 | FD3S TYPE IV | 1996-1998 | TT | 13B-REW | R,RX-7 | FD3S TYPE V | 1999-2000 | TT | 13B-REW | R,RX-7 | FD3S TYPE VI | 2000-2002 | TT | 13B-REW | R\u003c!--split--\u003e"}

{"id":3973275156591,"title":"Fujitsubo - Super Ti Exhaust system - Nissan - Skyline GT-R BNR32","handle":"fujitsubo-super-ti-exhaust-system-nissan-skyline-gt-r-bnr32-bnr32-480-15061","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Fujitsubo\u003cbr\u003eReference Number: 480-15061\u003cbr\u003eExhaust Type: Exhaust system\u003cbr\u003eMaterial Used: Titanium\u003cbr\u003e\u003cbr\u003eSuper Ti is Fujitsubo's premier exhaust system. It features full titanium construction, large diameter mandrel piping, and high flow muffler. Each Super Ti kit is developed for optimum horsepower while greatly reducing weight. For a Mitsubishi EVO 9 application the Super Ti was 60% lighter in weight than OE, a difference of 21 lbs. The reduced weight will benefit all aspects of vehicle performance including acceleration, braking, and handling. The goal in development is to increase power throughout the RPM range with an emphasis on high RPM power. All components are made of titanium from tip, muffler, resonators, piping, brackets, and hangers.\u003cbr\u003e\u003cbr\u003eSuper lightweight Titanium construction with a straight through muffler design. Developed to be high flow with an aggressive exhaust note. The compact round shaped muffler and large diameter tip are designed to pursue exhaust efficiency and at the same time reduce sound to acceptable limits. Slashed and straight tip designs are available to offer a sharp feeling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from Japanese Warehouse to our French Warehouse and redistributed in Europe!\u003cbr\u003ePlease note that certain countries such as UK and Switzerland may incur additional taxes on arrival. Please check with your local authorities. Rzcrew Trading Pte Ltd will not bear any responsibility about it. Feel free to contact us if necessary.Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6,Skyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6,Skyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2019-09-11T16:58:54+08:00","created_at":"2019-09-11T16:58:55+08:00","vendor":"Fujitsubo","type":"Catbacks - Exhaust Manifolds","tags":["1989","1990","1991","1992","1993","1994","BNR32","catbacks-exhaust-manifolds","exhaust-system","fujitsubo","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","titanium","ws114"],"price":400620,"price_min":400620,"price_max":400620,"available":true,"price_varies":false,"compare_at_price":450480,"compare_at_price_min":450480,"compare_at_price_max":450480,"compare_at_price_varies":false,"variants":[{"id":29557087502447,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"480-15061","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fujitsubo - Super Ti Exhaust system - Nissan - Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":400620,"weight":60000,"compare_at_price":450480,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Fujitsubo_Super_Ti_af7b180d-7c06-4698-8bc3-eeb77433afe5.jpg?v=1677232409"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Fujitsubo_Super_Ti_af7b180d-7c06-4698-8bc3-eeb77433afe5.jpg?v=1677232409","options":["Title"],"media":[{"alt":"Fujitsubo - Super Ti Exhaust system - Nissan - Skyline GT-R BNR32 - BNR32 - 480-15061","id":33085251649811,"position":1,"preview_image":{"aspect_ratio":2.223,"height":300,"width":667,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Fujitsubo_Super_Ti_af7b180d-7c06-4698-8bc3-eeb77433afe5.jpg?v=1677232409"},"aspect_ratio":2.223,"height":300,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Fujitsubo_Super_Ti_af7b180d-7c06-4698-8bc3-eeb77433afe5.jpg?v=1677232409","width":667}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Fujitsubo\u003cbr\u003eReference Number: 480-15061\u003cbr\u003eExhaust Type: Exhaust system\u003cbr\u003eMaterial Used: Titanium\u003cbr\u003e\u003cbr\u003eSuper Ti is Fujitsubo's premier exhaust system. It features full titanium construction, large diameter mandrel piping, and high flow muffler. Each Super Ti kit is developed for optimum horsepower while greatly reducing weight. For a Mitsubishi EVO 9 application the Super Ti was 60% lighter in weight than OE, a difference of 21 lbs. The reduced weight will benefit all aspects of vehicle performance including acceleration, braking, and handling. The goal in development is to increase power throughout the RPM range with an emphasis on high RPM power. All components are made of titanium from tip, muffler, resonators, piping, brackets, and hangers.\u003cbr\u003e\u003cbr\u003eSuper lightweight Titanium construction with a straight through muffler design. Developed to be high flow with an aggressive exhaust note. The compact round shaped muffler and large diameter tip are designed to pursue exhaust efficiency and at the same time reduce sound to acceptable limits. Slashed and straight tip designs are available to offer a sharp feeling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from Japanese Warehouse to our French Warehouse and redistributed in Europe!\u003cbr\u003ePlease note that certain countries such as UK and Switzerland may incur additional taxes on arrival. Please check with your local authorities. Rzcrew Trading Pte Ltd will not bear any responsibility about it. Feel free to contact us if necessary.Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6,Skyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6,Skyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}

{"id":2206053924975,"title":"Spoon Rigid Collar Kit - Rear - Subaru SVX Alcione CXW","handle":"spoon-rigid-collar-kit-rear-subaru-svx-alcione-cxw-50300-cxw-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-CXW-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSVX Alcione | CXW | 1991-1996 | NA | EG33 | H6\u003c!--split--\u003e","published_at":"2019-04-24T12:14:30+08:00","created_at":"2019-04-24T12:14:31+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","collar-kits","CXW","rear","rigid-collars","spoon","spoon18.9644247317924","subaru","svx-alcione-cxw-1991-1996-na-eg33-h6","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638485151855,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-CXW-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Subaru SVX Alcione CXW","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_435bce61-a68c-4871-bbb5-bc9f4fede002.jpg?v=1571709670"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_435bce61-a68c-4871-bbb5-bc9f4fede002.jpg?v=1571709670","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Subaru SVX Alcione CXW - 50300-CXW-000 - RZCrewEurope","id":1967736619119,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_435bce61-a68c-4871-bbb5-bc9f4fede002.jpg?v=1571709670"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_435bce61-a68c-4871-bbb5-bc9f4fede002.jpg?v=1571709670","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-CXW-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSVX Alcione | CXW | 1991-1996 | NA | EG33 | H6\u003c!--split--\u003e"}

{"id":2206053892207,"title":"Spoon Rigid Collar Kit - Front - Subaru SVX Alcione CXW","handle":"spoon-rigid-collar-kit-front-subaru-svx-alcione-cxw-50261-cxw-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-CXW-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSVX Alcione | CXW | 1991-1996 | NA | EG33 | H6\u003c!--split--\u003e","published_at":"2019-04-24T12:14:29+08:00","created_at":"2019-04-24T12:14:30+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","collar-kits","CXW","front","rigid-collars","spoon","spoon18.9644247317924","subaru","svx-alcione-cxw-1991-1996-na-eg33-h6","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638485119087,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-CXW-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Subaru SVX Alcione CXW","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b1bebb4a-2bb6-46c9-b373-988e24404a87.jpg?v=1571709670"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b1bebb4a-2bb6-46c9-b373-988e24404a87.jpg?v=1571709670","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Subaru SVX Alcione CXW - 50261-CXW-000 - RZCrewEurope","id":1967736586351,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b1bebb4a-2bb6-46c9-b373-988e24404a87.jpg?v=1571709670"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b1bebb4a-2bb6-46c9-b373-988e24404a87.jpg?v=1571709670","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-CXW-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSVX Alcione | CXW | 1991-1996 | NA | EG33 | H6\u003c!--split--\u003e"}

{"id":2206052778095,"title":"Spoon Rigid Collar Kit - Front - Mitsubishi FTO DE3A","handle":"spoon-rigid-collar-kit-front-mitsubishi-fto-de3a-50261-cp9-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-CP9-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFTO | DE3A Zenki | 1994-1996 | NA | 6A12 | V6\u003cbr\u003eFTO | DE3A Chuki | 1996-1997 | NA | 6A12 | V6\u003cbr\u003eFTO | DE3A Kouki | 1997-2000 | NA | 6A12 | V6\u003c!--split--\u003e","published_at":"2019-04-24T12:13:41+08:00","created_at":"2019-04-24T12:13:42+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1994","1995","1996","1997","collar-kits","DE3A","front","fto-de3a-chuki-1996-1997-na-6a12-v6","fto-de3a-kouki-1997-2000-na-6a12-v6","fto-de3a-zenki-1994-1996-na-6a12-v6","mitsubishi","rigid-collars","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638483906671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-CP9-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Mitsubishi FTO DE3A","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b4e20e94-9dde-4f4a-b209-8a4491a807c4.jpg?v=1571709669"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b4e20e94-9dde-4f4a-b209-8a4491a807c4.jpg?v=1571709669","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Mitsubishi FTO DE3A - 50261-CP9-000 - RZCrewEurope","id":1967735472239,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b4e20e94-9dde-4f4a-b209-8a4491a807c4.jpg?v=1571709669"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b4e20e94-9dde-4f4a-b209-8a4491a807c4.jpg?v=1571709669","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-CP9-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFTO | DE3A Zenki | 1994-1996 | NA | 6A12 | V6\u003cbr\u003eFTO | DE3A Chuki | 1996-1997 | NA | 6A12 | V6\u003cbr\u003eFTO | DE3A Kouki | 1997-2000 | NA | 6A12 | V6\u003c!--split--\u003e"}

{"id":2206052745327,"title":"Spoon Rigid Collar Kit - Rear - Mitsubishi Minica H31A","handle":"spoon-rigid-collar-kit-rear-mitsubishi-minica-h31a-50300-ha1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-HA1-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMinica | H31A | 1993-1998 | TC | 4A30 | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:13:39+08:00","created_at":"2019-04-24T12:13:40+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1993","1994","1995","1996","1997","1998","collar-kits","H31A","minica-h31a-1993-1998-tc-4a30-i4","mitsubishi","rear","rigid-collars","spoon","spoon18.4413470431619","tva"],"price":9600,"price_min":9600,"price_max":9600,"available":true,"price_varies":false,"compare_at_price":9600,"compare_at_price_min":9600,"compare_at_price_max":9600,"compare_at_price_varies":false,"variants":[{"id":20638483873903,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-HA1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Mitsubishi Minica H31A","public_title":null,"options":["Default Title"],"price":9600,"weight":2100,"compare_at_price":9600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0c31ed99-958c-4f8b-861d-c2bd10667737.jpg?v=1571709669"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0c31ed99-958c-4f8b-861d-c2bd10667737.jpg?v=1571709669","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Mitsubishi Minica H31A - 50300-HA1-000 - RZCrewEurope","id":1967735439471,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0c31ed99-958c-4f8b-861d-c2bd10667737.jpg?v=1571709669"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0c31ed99-958c-4f8b-861d-c2bd10667737.jpg?v=1571709669","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-HA1-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMinica | H31A | 1993-1998 | TC | 4A30 | I4\u003c!--split--\u003e"}

{"id":2206052679791,"title":"Spoon Rigid Collar Kit - Front - Mitsubishi Minica H31A","handle":"spoon-rigid-collar-kit-front-mitsubishi-minica-h31a-50261-h31-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-H31-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMinica | H31A | 1993-1998 | TC | 4A30 | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:13:38+08:00","created_at":"2019-04-24T12:13:38+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1993","1994","1995","1996","1997","1998","collar-kits","front","H31A","minica-h31a-1993-1998-tc-4a30-i4","mitsubishi","rigid-collars","spoon","spoon18.3737307721342","tva"],"price":21240,"price_min":21240,"price_max":21240,"available":true,"price_varies":false,"compare_at_price":21240,"compare_at_price_min":21240,"compare_at_price_max":21240,"compare_at_price_varies":false,"variants":[{"id":20638483841135,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-H31-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Mitsubishi Minica H31A","public_title":null,"options":["Default Title"],"price":21240,"weight":2100,"compare_at_price":21240,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_1098fb01-d092-4b6a-a4f7-de5477ee0d59.jpg?v=1571709669"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_1098fb01-d092-4b6a-a4f7-de5477ee0d59.jpg?v=1571709669","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Mitsubishi Minica H31A - 50261-H31-000 - RZCrewEurope","id":1967735406703,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_1098fb01-d092-4b6a-a4f7-de5477ee0d59.jpg?v=1571709669"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_1098fb01-d092-4b6a-a4f7-de5477ee0d59.jpg?v=1571709669","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-H31-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMinica | H31A | 1993-1998 | TC | 4A30 | I4\u003c!--split--\u003e"}

{"id":2206052122735,"title":"Spoon Rigid Collar Kit - Rear - Mazda Familia BG5P","handle":"spoon-rigid-collar-kit-rear-mazda-familia-bg5p-50300-bg5-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-BG5-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFamilia | BG5P | 1991-1994 | NA | B5 | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:13:06+08:00","created_at":"2019-04-24T12:13:07+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","BG5P","collar-kits","familia-bg5p-1991-1994-na-b5-i4","mazda","rear","rigid-collars","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638483284079,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-BG5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Mazda Familia BG5P","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3ad0984b-184b-4a54-a459-2176f30db2e2.jpg?v=1571709668"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3ad0984b-184b-4a54-a459-2176f30db2e2.jpg?v=1571709668","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Mazda Familia BG5P - 50300-BG5-000 - RZCrewEurope","id":1967734849647,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3ad0984b-184b-4a54-a459-2176f30db2e2.jpg?v=1571709668"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3ad0984b-184b-4a54-a459-2176f30db2e2.jpg?v=1571709668","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-BG5-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFamilia | BG5P | 1991-1994 | NA | B5 | I4\u003c!--split--\u003e"}

{"id":2206052089967,"title":"Spoon Rigid Collar Kit - Front - Mazda Familia BG5P","handle":"spoon-rigid-collar-kit-front-mazda-familia-bg5p-50261-bg5-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BG5-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFamilia | BG5P | 1991-1994 | NA | B5 | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:13:05+08:00","created_at":"2019-04-24T12:13:06+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","BG5P","collar-kits","familia-bg5p-1991-1994-na-b5-i4","front","mazda","rigid-collars","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638483251311,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-BG5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Mazda Familia BG5P","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0798dd4b-36ea-4909-bed4-3e41d912f038.jpg?v=1571709668"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0798dd4b-36ea-4909-bed4-3e41d912f038.jpg?v=1571709668","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Mazda Familia BG5P - 50261-BG5-000 - RZCrewEurope","id":1967734816879,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0798dd4b-36ea-4909-bed4-3e41d912f038.jpg?v=1571709668"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0798dd4b-36ea-4909-bed4-3e41d912f038.jpg?v=1571709668","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BG5-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFamilia | BG5P | 1991-1994 | NA | B5 | I4\u003c!--split--\u003e"}

{"id":2206051303535,"title":"Spoon Rigid Collar Kit - Rear - Nissan Pulsar RNN14","handle":"spoon-rigid-collar-kit-rear-nissan-pulsar-rnn14-50300-z32-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-Z32-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:12:30+08:00","created_at":"2019-04-24T12:12:31+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1990","1991","1992","1993","1994","1995","collar-kits","nissan","pulsar-rnn14-kouki-1992-1995-tc-sr20det-i4","pulsar-rnn14-zenki-1990-1992-tc-sr20det-i4","rear","rigid-collars","RNN14","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638482202735,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-Z32-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Nissan Pulsar RNN14","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dd4dd98c-83e6-4cb6-acb8-e751cfaa583a.jpg?v=1571709668"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dd4dd98c-83e6-4cb6-acb8-e751cfaa583a.jpg?v=1571709668","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Nissan Pulsar RNN14 - 50300-Z32-000 - RZCrewEurope","id":1967734030447,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dd4dd98c-83e6-4cb6-acb8-e751cfaa583a.jpg?v=1571709668"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dd4dd98c-83e6-4cb6-acb8-e751cfaa583a.jpg?v=1571709668","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-Z32-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003e"}

{"id":2206051270767,"title":"Spoon Rigid Collar Kit - Front - Nissan Pulsar RNN14","handle":"spoon-rigid-collar-kit-front-nissan-pulsar-rnn14-50261-rnn-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-RNN-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:12:27+08:00","created_at":"2019-04-24T12:12:27+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1990","1991","1992","1993","1994","1995","collar-kits","front","nissan","pulsar-rnn14-kouki-1992-1995-tc-sr20det-i4","pulsar-rnn14-zenki-1990-1992-tc-sr20det-i4","rigid-collars","RNN14","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638482169967,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-RNN-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Pulsar RNN14","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5bd95131-3061-4ee2-8441-38b7fd1f5094.jpg?v=1571709668"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5bd95131-3061-4ee2-8441-38b7fd1f5094.jpg?v=1571709668","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Pulsar RNN14 - 50261-RNN-000 - RZCrewEurope","id":1967733997679,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5bd95131-3061-4ee2-8441-38b7fd1f5094.jpg?v=1571709668"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5bd95131-3061-4ee2-8441-38b7fd1f5094.jpg?v=1571709668","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-RNN-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003e"}

{"id":2206050680943,"title":"Spoon Rigid Collar Kit - Rear - Nissan Silvia S14","handle":"spoon-rigid-collar-kit-rear-nissan-silvia-s14-50300-z32-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-Z32-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:12:02+08:00","created_at":"2019-04-24T12:12:03+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1993","1994","1995","1996","1997","1998","collar-kits","nissan","rear","rigid-collars","S14","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638481612911,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-Z32-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e2051fdd-b9d5-4550-9df1-6b2151b7ace7.jpg?v=1571709667"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e2051fdd-b9d5-4550-9df1-6b2151b7ace7.jpg?v=1571709667","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Nissan Silvia S14 - 50300-Z32-000 - RZCrewEurope","id":1967733440623,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e2051fdd-b9d5-4550-9df1-6b2151b7ace7.jpg?v=1571709667"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e2051fdd-b9d5-4550-9df1-6b2151b7ace7.jpg?v=1571709667","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-Z32-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003e"}

{"id":2206050648175,"title":"Spoon Rigid Collar Kit - Front - Nissan Silvia S14","handle":"spoon-rigid-collar-kit-front-nissan-silvia-s14-50261-s14-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-S14-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:12:01+08:00","created_at":"2019-04-24T12:12:02+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1993","1994","1995","1996","1997","1998","collar-kits","front","nissan","rigid-collars","S14","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638481547375,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-S14-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0b3c42f1-d509-4714-8f9c-59369a60adef.jpg?v=1571709667"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0b3c42f1-d509-4714-8f9c-59369a60adef.jpg?v=1571709667","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Silvia S14 - 50261-S14-000 - RZCrewEurope","id":1967733375087,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0b3c42f1-d509-4714-8f9c-59369a60adef.jpg?v=1571709667"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0b3c42f1-d509-4714-8f9c-59369a60adef.jpg?v=1571709667","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-S14-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003e"}

{"id":2206049108079,"title":"Spoon Rigid Collar Kit - Front - Toyota Celsior UCF20","handle":"spoon-rigid-collar-kit-front-toyota-celsior-ucf20-50261-ucf-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-UCF-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCelsior | UCF20 | 1994-2000 | NA | 1UZ-FE | V8\u003c!--split--\u003e","published_at":"2019-04-24T12:10:58+08:00","created_at":"2019-04-24T12:10:59+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1994","1995","1996","1997","1998","1999","2000","celsior-ucf20-1994-2000-na-1uz-fe-v8","collar-kits","front","rigid-collars","spoon","spoon18.9644247317924","toyota","tva","UCF20"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638479974511,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-UCF-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Celsior UCF20","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_6178125f-8aaf-42eb-bdc3-62ba2f23f121.jpg?v=1571709666"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_6178125f-8aaf-42eb-bdc3-62ba2f23f121.jpg?v=1571709666","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Celsior UCF20 - 50261-UCF-000 - RZCrewEurope","id":1967731900527,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_6178125f-8aaf-42eb-bdc3-62ba2f23f121.jpg?v=1571709666"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_6178125f-8aaf-42eb-bdc3-62ba2f23f121.jpg?v=1571709666","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-UCF-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCelsior | UCF20 | 1994-2000 | NA | 1UZ-FE | V8\u003c!--split--\u003e"}

{"id":2206049042543,"title":"Spoon Rigid Collar Kit - Rear - Toyota Corona Exiv ST205","handle":"spoon-rigid-collar-kit-rear-toyota-corona-exiv-st205-50300-st2-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-ST2-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCorona Exiv | ST205 | 1994-1994 | NA | 3S-GE | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:10:57+08:00","created_at":"2019-04-24T12:10:57+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1994","collar-kits","corona-exiv-st205-1994-1994-na-3s-ge-i4","rear","rigid-collars","spoon","spoon18.9644247317924","ST205","toyota","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638479908975,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-ST2-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Toyota Corona Exiv ST205","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5c28ba01-c829-4753-bc71-d56a5bf9fdfb.jpg?v=1571709666"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5c28ba01-c829-4753-bc71-d56a5bf9fdfb.jpg?v=1571709666","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Toyota Corona Exiv ST205 - 50300-ST2-000 - RZCrewEurope","id":1967731867759,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5c28ba01-c829-4753-bc71-d56a5bf9fdfb.jpg?v=1571709666"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5c28ba01-c829-4753-bc71-d56a5bf9fdfb.jpg?v=1571709666","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-ST2-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCorona Exiv | ST205 | 1994-1994 | NA | 3S-GE | I4\u003c!--split--\u003e"}

{"id":2206049009775,"title":"Spoon Rigid Collar Kit - Front - Toyota Corona Exiv ST205","handle":"spoon-rigid-collar-kit-front-toyota-corona-exiv-st205-50261-st2-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ST2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCorona Exiv | ST205 | 1994-1994 | NA | 3S-GE | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:10:55+08:00","created_at":"2019-04-24T12:10:56+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1994","collar-kits","corona-exiv-st205-1994-1994-na-3s-ge-i4","front","rigid-collars","spoon","spoon18.9644247317924","ST205","toyota","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638479810671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-ST2-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Corona Exiv ST205","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_d2e2567a-dda6-4f17-b830-a9a51b744e5f.jpg?v=1571709666"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_d2e2567a-dda6-4f17-b830-a9a51b744e5f.jpg?v=1571709666","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Corona Exiv ST205 - 50261-ST2-000 - RZCrewEurope","id":1967731834991,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_d2e2567a-dda6-4f17-b830-a9a51b744e5f.jpg?v=1571709666"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_d2e2567a-dda6-4f17-b830-a9a51b744e5f.jpg?v=1571709666","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ST2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCorona Exiv | ST205 | 1994-1994 | NA | 3S-GE | I4\u003c!--split--\u003e"}

{"id":2206048944239,"title":"Spoon Rigid Collar Kit - Rear - Toyota Supra JZA80","handle":"spoon-rigid-collar-kit-rear-toyota-supra-jza80-50300-a80-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-A80-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSupra | JZA80 TT | 1993-2002 | TT | 2JZ-GTE | I6\u003cbr\u003eSupra | JZA80 NA | 1993-2002 | NA | 2JZ-GE | I6\u003c!--split--\u003e","published_at":"2019-04-24T12:10:54+08:00","created_at":"2019-04-24T12:10:55+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","collar-kits","JZA80","rear","rigid-collars","spoon","spoon18.9644247317924","supra-jza80-na-1993-2002-na-2jz-ge-i6","supra-jza80-tt-1993-2002-tt-2jz-gte-i6","toyota","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638479777903,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-A80-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Toyota Supra JZA80","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_aad58714-7c51-484b-83a8-b52ad62b141a.jpg?v=1571709666"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_aad58714-7c51-484b-83a8-b52ad62b141a.jpg?v=1571709666","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Toyota Supra JZA80 - 50300-A80-000 - RZCrewEurope","id":1967731802223,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_aad58714-7c51-484b-83a8-b52ad62b141a.jpg?v=1571709666"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_aad58714-7c51-484b-83a8-b52ad62b141a.jpg?v=1571709666","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-A80-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSupra | JZA80 TT | 1993-2002 | TT | 2JZ-GTE | I6\u003cbr\u003eSupra | JZA80 NA | 1993-2002 | NA | 2JZ-GE | I6\u003c!--split--\u003e"}

{"id":2206048911471,"title":"Spoon Rigid Collar Kit - Front - Toyota Supra JZA80","handle":"spoon-rigid-collar-kit-front-toyota-supra-jza80-50261-a80-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-A80-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSupra | JZA80 TT | 1993-2002 | TT | 2JZ-GTE | I6\u003cbr\u003eSupra | JZA80 NA | 1993-2002 | NA | 2JZ-GE | I6\u003c!--split--\u003e","published_at":"2019-04-24T12:10:52+08:00","created_at":"2019-04-24T12:10:53+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","collar-kits","front","JZA80","rigid-collars","spoon","spoon18.9644247317924","supra-jza80-na-1993-2002-na-2jz-ge-i6","supra-jza80-tt-1993-2002-tt-2jz-gte-i6","toyota","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638479745135,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-A80-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Supra JZA80","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_66aaf52d-1f40-482d-9337-09211f3f3a0c.jpg?v=1571709666"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_66aaf52d-1f40-482d-9337-09211f3f3a0c.jpg?v=1571709666","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Supra JZA80 - 50261-A80-000 - RZCrewEurope","id":1967731769455,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_66aaf52d-1f40-482d-9337-09211f3f3a0c.jpg?v=1571709666"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_66aaf52d-1f40-482d-9337-09211f3f3a0c.jpg?v=1571709666","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-A80-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSupra | JZA80 TT | 1993-2002 | TT | 2JZ-GTE | I6\u003cbr\u003eSupra | JZA80 NA | 1993-2002 | NA | 2JZ-GE | I6\u003c!--split--\u003e"}

{"id":2206048813167,"title":"Spoon Rigid Collar Kit - Rear - Toyota Mark II Chaser Cresta JZX90","handle":"spoon-rigid-collar-kit-rear-toyota-mark-ii-chaser-cresta-jzx90-50300-x90-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-X90-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMark II Chaser Cresta | JZX90 (1JZ-GTE) | 1992-1996 | TT | 1JZ-GTE | I6\u003cbr\u003eMark II Chaser Cresta | JZX90 (1JZ-GE) | 1992-1996 | NA | 1JZ-GE | I6\u003c!--split--\u003e","published_at":"2019-04-24T12:10:48+08:00","created_at":"2019-04-24T12:10:49+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1992","1993","1994","1995","1996","collar-kits","JZX90","mark-ii-chaser-cresta-jzx90-1jz-ge-1992-1996-na-1jz-ge-i6","mark-ii-chaser-cresta-jzx90-1jz-gte-1992-1996-tt-1jz-gte-i6","rear","rigid-collars","spoon","spoon18.9644247317924","toyota","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638479646831,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-X90-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Toyota Mark II Chaser Cresta JZX90","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_185e8156-10b7-4bdb-90fa-599818363a49.jpg?v=1571709665"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_185e8156-10b7-4bdb-90fa-599818363a49.jpg?v=1571709665","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Toyota Mark II Chaser Cresta JZX90 - 50300-X90-000 - RZCrewEurope","id":1967731671151,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_185e8156-10b7-4bdb-90fa-599818363a49.jpg?v=1571709665"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_185e8156-10b7-4bdb-90fa-599818363a49.jpg?v=1571709665","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-X90-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMark II Chaser Cresta | JZX90 (1JZ-GTE) | 1992-1996 | TT | 1JZ-GTE | I6\u003cbr\u003eMark II Chaser Cresta | JZX90 (1JZ-GE) | 1992-1996 | NA | 1JZ-GE | I6\u003c!--split--\u003e"}

{"id":2206048780399,"title":"Spoon Rigid Collar Kit - Front - Toyota Mark II Chaser Cresta JZX90","handle":"spoon-rigid-collar-kit-front-toyota-mark-ii-chaser-cresta-jzx90-50261-x10-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-X10-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMark II Chaser Cresta | JZX90 (1JZ-GTE) | 1992-1996 | TT | 1JZ-GTE | I6\u003cbr\u003eMark II Chaser Cresta | JZX90 (1JZ-GE) | 1992-1996 | NA | 1JZ-GE | I6\u003c!--split--\u003e","published_at":"2019-04-24T12:10:46+08:00","created_at":"2019-04-24T12:10:47+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1992","1993","1994","1995","1996","collar-kits","front","JZX90","mark-ii-chaser-cresta-jzx90-1jz-ge-1992-1996-na-1jz-ge-i6","mark-ii-chaser-cresta-jzx90-1jz-gte-1992-1996-tt-1jz-gte-i6","rigid-collars","spoon","spoon18.9644247317924","toyota","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638479614063,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-X10-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Mark II Chaser Cresta JZX90","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_7b68769c-55ee-4c53-940b-fd8ae1e3b787.jpg?v=1571709665"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_7b68769c-55ee-4c53-940b-fd8ae1e3b787.jpg?v=1571709665","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Mark II Chaser Cresta JZX90 - 50261-X10-000 - RZCrewEurope","id":1967731507311,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_7b68769c-55ee-4c53-940b-fd8ae1e3b787.jpg?v=1571709665"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_7b68769c-55ee-4c53-940b-fd8ae1e3b787.jpg?v=1571709665","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-X10-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMark II Chaser Cresta | JZX90 (1JZ-GTE) | 1992-1996 | TT | 1JZ-GTE | I6\u003cbr\u003eMark II Chaser Cresta | JZX90 (1JZ-GE) | 1992-1996 | NA | 1JZ-GE | I6\u003c!--split--\u003e"}

{"id":2206047633519,"title":"Spoon Rigid Collar Kit - Rear - Toyota MR-2 SW20 Na\/T","handle":"spoon-rigid-collar-kit-rear-toyota-mr-2-sw20-na-t-50300-sw2-1000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-SW2-1000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMR-2 | SW20 | 1989-1999 | TC | 3S-GTE | I4\u003cbr\u003eMR-2 | SW20 | 1989-1999 | NA | 3S-GE | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:09:51+08:00","created_at":"2019-04-24T12:09:52+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","collar-kits","mr-2-sw20-1989-1999-na-3s-ge-i4","mr-2-sw20-1989-1999-tc-3s-gte-i4","rear","rigid-collars","spoon","spoon18.9644247317924","SW20 Na\/T","toyota","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638477582447,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-SW2-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Toyota MR-2 SW20 Na\/T","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_58a22335-da76-4ace-8a28-cd9f8b413fe3.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_58a22335-da76-4ace-8a28-cd9f8b413fe3.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Toyota MR-2 SW20 Na\/T - 50300-SW2-1000 - RZCrewEurope","id":1967730425967,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_58a22335-da76-4ace-8a28-cd9f8b413fe3.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_58a22335-da76-4ace-8a28-cd9f8b413fe3.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-SW2-1000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMR-2 | SW20 | 1989-1999 | TC | 3S-GTE | I4\u003cbr\u003eMR-2 | SW20 | 1989-1999 | NA | 3S-GE | I4\u003c!--split--\u003e"}

{"id":2206047600751,"title":"Spoon Rigid Collar Kit - Front - Toyota MR-2 SW20 Na\/T","handle":"spoon-rigid-collar-kit-front-toyota-mr-2-sw20-na-t-50261-sw2-1000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-SW2-1000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMR-2 | SW20 | 1989-1999 | TC | 3S-GTE | I4\u003cbr\u003eMR-2 | SW20 | 1989-1999 | NA | 3S-GE | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:09:50+08:00","created_at":"2019-04-24T12:09:51+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","collar-kits","front","mr-2-sw20-1989-1999-na-3s-ge-i4","mr-2-sw20-1989-1999-tc-3s-gte-i4","rigid-collars","spoon","spoon18.9644247317924","SW20 Na\/T","toyota","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638477549679,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-SW2-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota MR-2 SW20 Na\/T","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f4d97b72-f3c1-4887-b22a-1c41c3d975d5.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f4d97b72-f3c1-4887-b22a-1c41c3d975d5.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota MR-2 SW20 Na\/T - 50261-SW2-1000 - RZCrewEurope","id":1967730393199,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f4d97b72-f3c1-4887-b22a-1c41c3d975d5.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f4d97b72-f3c1-4887-b22a-1c41c3d975d5.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-SW2-1000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMR-2 | SW20 | 1989-1999 | TC | 3S-GTE | I4\u003cbr\u003eMR-2 | SW20 | 1989-1999 | NA | 3S-GE | I4\u003c!--split--\u003e"}

{"id":2206046847087,"title":"Spoon Rigid Collar Kit - Front \u0026 Rear - Honda NSX NA1\/NA2","handle":"spoon-rigid-collar-kit-front-rear-honda-nsx-na1-na2-50261-na1-001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-NA1-001\u003cbr\u003ePosition: Front \u0026amp; Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eNSX | NA1 | 1990-2005 | NA | C30A | V6\u003cbr\u003eNSX | NA2 | 1990-2005 | NA | C32B | V6\u003c!--split--\u003e","published_at":"2019-04-24T12:09:24+08:00","created_at":"2019-04-24T12:09:25+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","collar-kits","front","honda","NA1\/NA2","nsx-na1-1990-2005-na-c30a-v6","nsx-na2-1990-2005-na-c32b-v6","rear","rigid-collars","spoon","spoon19.7227208239646","tva"],"price":45960,"price_min":45960,"price_max":45960,"available":true,"price_varies":false,"compare_at_price":45960,"compare_at_price_min":45960,"compare_at_price_max":45960,"compare_at_price_varies":false,"variants":[{"id":20638475976815,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-NA1-001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front \u0026 Rear - Honda NSX NA1\/NA2","public_title":null,"options":["Default Title"],"price":45960,"weight":2100,"compare_at_price":45960,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f2518771-9ed3-49ce-9669-1d5c1ff25872.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f2518771-9ed3-49ce-9669-1d5c1ff25872.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front \u0026 Rear - Honda NSX NA1\/NA2 - 50261-NA1-001 - RZCrewEurope","id":1967729573999,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f2518771-9ed3-49ce-9669-1d5c1ff25872.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f2518771-9ed3-49ce-9669-1d5c1ff25872.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-NA1-001\u003cbr\u003ePosition: Front \u0026amp; Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eNSX | NA1 | 1990-2005 | NA | C30A | V6\u003cbr\u003eNSX | NA2 | 1990-2005 | NA | C32B | V6\u003c!--split--\u003e"}

{"id":2206046617711,"title":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA8","handle":"spoon-rigid-collar-kit-rear-subaru-justy-ka8-50300-ka8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-KA8-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA8 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:09:15+08:00","created_at":"2019-04-24T12:09:16+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","collar-kits","justy-ka8-1989-1994-na-ef12-i3","KA8","rear","rigid-collars","spoon","spoon18.8108236846911","subaru","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475747439,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-KA8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA8","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_cf374960-d4e3-463d-ad65-134edbeaa777.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_cf374960-d4e3-463d-ad65-134edbeaa777.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA8 - 50300-KA8-000 - RZCrewEurope","id":1967729377391,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_cf374960-d4e3-463d-ad65-134edbeaa777.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_cf374960-d4e3-463d-ad65-134edbeaa777.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-KA8-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA8 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e"}

{"id":2206046584943,"title":"Spoon Rigid Collar Kit - Front - Subaru Justy KA8","handle":"spoon-rigid-collar-kit-front-subaru-justy-ka8-50261-ka8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-KA8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA8 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:09:14+08:00","created_at":"2019-04-24T12:09:15+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","collar-kits","front","justy-ka8-1989-1994-na-ef12-i3","KA8","rigid-collars","spoon","spoon18.8108236846911","subaru","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475714671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-KA8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Subaru Justy KA8","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dc8cc3aa-4c9a-45bd-ae1b-eb5121b4ea24.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dc8cc3aa-4c9a-45bd-ae1b-eb5121b4ea24.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Subaru Justy KA8 - 50261-KA8-000 - RZCrewEurope","id":1967729344623,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dc8cc3aa-4c9a-45bd-ae1b-eb5121b4ea24.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dc8cc3aa-4c9a-45bd-ae1b-eb5121b4ea24.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-KA8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA8 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e"}

{"id":2206046519407,"title":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA7","handle":"spoon-rigid-collar-kit-rear-subaru-justy-ka7-50300-ka8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-KA8-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA7 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:09:12+08:00","created_at":"2019-04-24T12:09:13+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","collar-kits","justy-ka7-1989-1994-na-ef12-i3","KA7","rear","rigid-collars","spoon","spoon18.8108236846911","subaru","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475649135,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-KA8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA7","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fbe3a135-f2c4-4a87-8f8e-e08adcceec06.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fbe3a135-f2c4-4a87-8f8e-e08adcceec06.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA7 - 50300-KA8-000 - RZCrewEurope","id":1967729311855,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fbe3a135-f2c4-4a87-8f8e-e08adcceec06.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fbe3a135-f2c4-4a87-8f8e-e08adcceec06.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-KA8-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA7 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e"}

{"id":2206046486639,"title":"Spoon Rigid Collar Kit - Front - Subaru Justy KA7","handle":"spoon-rigid-collar-kit-front-subaru-justy-ka7-50261-ka7-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-KA7-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA7 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:09:11+08:00","created_at":"2019-04-24T12:09:12+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","collar-kits","front","justy-ka7-1989-1994-na-ef12-i3","KA7","rigid-collars","spoon","spoon18.8108236846911","subaru","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475616367,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-KA7-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Subaru Justy KA7","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_442dadb8-c3f3-4695-aa91-1181ffde6ea0.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_442dadb8-c3f3-4695-aa91-1181ffde6ea0.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Subaru Justy KA7 - 50261-KA7-000 - RZCrewEurope","id":1967729279087,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_442dadb8-c3f3-4695-aa91-1181ffde6ea0.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_442dadb8-c3f3-4695-aa91-1181ffde6ea0.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-KA7-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA7 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e"}

{"id":2206046126191,"title":"Spoon Rigid Collar Kit - Rear - Honda Stepwagon BB1\/BB4\/BB5\/BB6","handle":"spoon-rigid-collar-kit-rear-honda-stepwagon-bb1-bb4-bb5-bb6-50300-bb6-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-BB6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BB1 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB4 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB5 | 1996-2001 | NA | F22B | I4\u003cbr\u003ePrelude | BB6 | 1996-2001 | NA | H22A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:08:53+08:00","created_at":"2019-04-24T12:08:54+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","BB1\/BB4\/BB5\/BB6","collar-kits","honda","prelude-bb1-1991-1996-na-h22a-i4","prelude-bb4-1991-1996-na-h22a-i4","prelude-bb5-1996-2001-na-f22b-i4","prelude-bb6-1996-2001-na-h22a-i4","rear","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475223151,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-BB6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Stepwagon BB1\/BB4\/BB5\/BB6","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_30a48e84-9e8b-45f5-98e8-d0daa4bd4ba6.jpg?v=1571709663"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_30a48e84-9e8b-45f5-98e8-d0daa4bd4ba6.jpg?v=1571709663","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Stepwagon BB1\/BB4\/BB5\/BB6 - 50300-BB6-000 - RZCrewEurope","id":1967728951407,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_30a48e84-9e8b-45f5-98e8-d0daa4bd4ba6.jpg?v=1571709663"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_30a48e84-9e8b-45f5-98e8-d0daa4bd4ba6.jpg?v=1571709663","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-BB6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BB1 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB4 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB5 | 1996-2001 | NA | F22B | I4\u003cbr\u003ePrelude | BB6 | 1996-2001 | NA | H22A | I4\u003c!--split--\u003e"}

{"id":2206046060655,"title":"Spoon Rigid Collar Kit - Front - Honda Stepwagon BB1\/BB4\/BB5\/BB6","handle":"spoon-rigid-collar-kit-front-honda-stepwagon-bb1-bb4-bb5-bb6-50261-bb8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BB8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BB1 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB4 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB5 | 1996-2001 | NA | F22B | I4\u003cbr\u003ePrelude | BB6 | 1996-2001 | NA | H22A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:08:52+08:00","created_at":"2019-04-24T12:08:52+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","BB1\/BB4\/BB5\/BB6","collar-kits","front","honda","prelude-bb1-1991-1996-na-h22a-i4","prelude-bb4-1991-1996-na-h22a-i4","prelude-bb5-1996-2001-na-f22b-i4","prelude-bb6-1996-2001-na-h22a-i4","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475124847,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-BB8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Stepwagon BB1\/BB4\/BB5\/BB6","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c4b69fc3-e80a-4263-991b-e70fb6574e48.jpg?v=1571709663"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c4b69fc3-e80a-4263-991b-e70fb6574e48.jpg?v=1571709663","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Stepwagon BB1\/BB4\/BB5\/BB6 - 50261-BB8-000 - RZCrewEurope","id":1967728918639,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c4b69fc3-e80a-4263-991b-e70fb6574e48.jpg?v=1571709663"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c4b69fc3-e80a-4263-991b-e70fb6574e48.jpg?v=1571709663","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BB8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BB1 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB4 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB5 | 1996-2001 | NA | F22B | I4\u003cbr\u003ePrelude | BB6 | 1996-2001 | NA | H22A | I4\u003c!--split--\u003e"}

{"id":2206043111535,"title":"Spoon Rigid Collar Kit - Rear - Honda Civic Ferio EG7\/EG8\/EG9","handle":"spoon-rigid-collar-kit-rear-honda-civic-ferio-eg7-eg8-eg9-50300-eka-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EKA-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | EG7 | 1992-1995 | NA | D13B1 | I4\u003cbr\u003eCivic Ferio | EG8 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic Ferio | EG9 | 1992-1995 | NA | B16A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:07:19+08:00","created_at":"2019-04-24T12:07:20+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1992","1993","1994","1995","civic-ferio-eg7-1992-1995-na-d13b1-i4","civic-ferio-eg8-1992-1995-na-d15b-i4","civic-ferio-eg9-1992-1995-na-b16a-i4","collar-kits","EG7\/EG8\/EG9","honda","rear","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638471684207,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-EKA-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Civic Ferio EG7\/EG8\/EG9","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_aded2465-c4f2-47b2-b884-39a4230cf460.jpg?v=1571709661"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_aded2465-c4f2-47b2-b884-39a4230cf460.jpg?v=1571709661","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Civic Ferio EG7\/EG8\/EG9 - 50300-EKA-000 - RZCrewEurope","id":1967726788719,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_aded2465-c4f2-47b2-b884-39a4230cf460.jpg?v=1571709661"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_aded2465-c4f2-47b2-b884-39a4230cf460.jpg?v=1571709661","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EKA-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | EG7 | 1992-1995 | NA | D13B1 | I4\u003cbr\u003eCivic Ferio | EG8 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic Ferio | EG9 | 1992-1995 | NA | B16A | I4\u003c!--split--\u003e"}

{"id":2206043013231,"title":"Spoon Rigid Collar Kit - Front - Honda Civic Ferio EG7\/EG8\/EG9","handle":"spoon-rigid-collar-kit-front-honda-civic-ferio-eg7-eg8-eg9-50261-dcr-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-DCR-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | EG7 | 1992-1995 | NA | D13B1 | I4\u003cbr\u003eCivic Ferio | EG8 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic Ferio | EG9 | 1992-1995 | NA | B16A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:07:18+08:00","created_at":"2019-04-24T12:07:19+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1992","1993","1994","1995","civic-ferio-eg7-1992-1995-na-d13b1-i4","civic-ferio-eg8-1992-1995-na-d15b-i4","civic-ferio-eg9-1992-1995-na-b16a-i4","collar-kits","EG7\/EG8\/EG9","front","honda","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638471585903,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-DCR-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Civic Ferio EG7\/EG8\/EG9","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_49165ea6-1ff0-4aca-afe2-fc4d471d607d.jpg?v=1571709661"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_49165ea6-1ff0-4aca-afe2-fc4d471d607d.jpg?v=1571709661","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Civic Ferio EG7\/EG8\/EG9 - 50261-DCR-000 - RZCrewEurope","id":1967726755951,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_49165ea6-1ff0-4aca-afe2-fc4d471d607d.jpg?v=1571709661"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_49165ea6-1ff0-4aca-afe2-fc4d471d607d.jpg?v=1571709661","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-DCR-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | EG7 | 1992-1995 | NA | D13B1 | I4\u003cbr\u003eCivic Ferio | EG8 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic Ferio | EG9 | 1992-1995 | NA | B16A | I4\u003c!--split--\u003e"}

{"id":2206042423407,"title":"Spoon Rigid Collar Kit - Rear - Honda Civic EG3\/EG4\/EG6","handle":"spoon-rigid-collar-kit-rear-honda-civic-eg3-eg4-eg6-50300-eka-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EKA-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic | EG3 | 1992-1995 | NA | D13B1 | I4\u003cbr\u003eCivic | EG4 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic | EG6 | 1992-1995 | NA | B16A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:06:48+08:00","created_at":"2019-04-24T12:06:49+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1992","1993","1994","1995","civic-eg3-1992-1995-na-d13b1-i4","civic-eg4-1992-1995-na-d15b-i4","civic-eg6-1992-1995-na-b16a-i4","collar-kits","EG3\/EG4\/EG6","honda","rear","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638470996079,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-EKA-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Civic EG3\/EG4\/EG6","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e8472777-b742-4371-b0dc-06dc2d23a24a.jpg?v=1571709661"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e8472777-b742-4371-b0dc-06dc2d23a24a.jpg?v=1571709661","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Civic EG3\/EG4\/EG6 - 50300-EKA-000 - RZCrewEurope","id":1967726264431,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e8472777-b742-4371-b0dc-06dc2d23a24a.jpg?v=1571709661"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e8472777-b742-4371-b0dc-06dc2d23a24a.jpg?v=1571709661","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EKA-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic | EG3 | 1992-1995 | NA | D13B1 | I4\u003cbr\u003eCivic | EG4 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic | EG6 | 1992-1995 | NA | B16A | I4\u003c!--split--\u003e"}

{"id":2206042390639,"title":"Spoon Rigid Collar Kit - Front - Honda Civic EG3\/EG4\/EG6","handle":"spoon-rigid-collar-kit-front-honda-civic-eg3-eg4-eg6-50261-dcr-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-DCR-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic | EG3 | 1992-1995 | NA | D13B1 | I4\u003cbr\u003eCivic | EG4 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic | EG6 | 1992-1995 | NA | B16A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:06:46+08:00","created_at":"2019-04-24T12:06:47+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1992","1993","1994","1995","civic-eg3-1992-1995-na-d13b1-i4","civic-eg4-1992-1995-na-d15b-i4","civic-eg6-1992-1995-na-b16a-i4","collar-kits","EG3\/EG4\/EG6","front","honda","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638470963311,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-DCR-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Civic EG3\/EG4\/EG6","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_2659dc2c-01a4-4e6b-b2e4-157367b40b7d.jpg?v=1571709661"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_2659dc2c-01a4-4e6b-b2e4-157367b40b7d.jpg?v=1571709661","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Civic EG3\/EG4\/EG6 - 50261-DCR-000 - RZCrewEurope","id":1967726231663,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_2659dc2c-01a4-4e6b-b2e4-157367b40b7d.jpg?v=1571709661"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_2659dc2c-01a4-4e6b-b2e4-157367b40b7d.jpg?v=1571709661","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-DCR-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic | EG3 | 1992-1995 | NA | D13B1 | I4\u003cbr\u003eCivic | EG4 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic | EG6 | 1992-1995 | NA | B16A | I4\u003c!--split--\u003e"}

{"id":2206041538671,"title":"Spoon Rigid Collar Kit - Rear - Honda Odyssey RA2\/RA4","handle":"spoon-rigid-collar-kit-rear-honda-odyssey-ra2-ra4-50300-ra6-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-RA6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:06:13+08:00","created_at":"2019-04-24T12:06:13+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1994","1995","1996","1997","1998","1999","collar-kits","honda","odyssey-ra2-1997-1999-na-f22b-i4","odyssey-ra4-1994-1999-na-f23a-i4","RA2\/RA4","rear","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638468833391,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-RA6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Odyssey RA2\/RA4","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3e67fcdd-b938-45ca-9fd2-414da10d5e04.jpg?v=1571709660"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3e67fcdd-b938-45ca-9fd2-414da10d5e04.jpg?v=1571709660","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Odyssey RA2\/RA4 - 50300-RA6-000 - RZCrewEurope","id":1967725215855,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3e67fcdd-b938-45ca-9fd2-414da10d5e04.jpg?v=1571709660"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3e67fcdd-b938-45ca-9fd2-414da10d5e04.jpg?v=1571709660","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-RA6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e"}

{"id":2206041505903,"title":"Spoon Rigid Collar Kit - Front - Honda Odyssey RA2\/RA4","handle":"spoon-rigid-collar-kit-front-honda-odyssey-ra2-ra4-50261-bb8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BB8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:06:11+08:00","created_at":"2019-04-24T12:06:12+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1994","1995","1996","1997","1998","1999","collar-kits","front","honda","odyssey-ra2-1997-1999-na-f22b-i4","odyssey-ra4-1994-1999-na-f23a-i4","RA2\/RA4","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638468669551,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-BB8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Odyssey RA2\/RA4","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e4b13df0-7500-4f81-aaeb-d036a50e73a2.jpg?v=1571709660"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e4b13df0-7500-4f81-aaeb-d036a50e73a2.jpg?v=1571709660","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Odyssey RA2\/RA4 - 50261-BB8-000 - RZCrewEurope","id":1967725183087,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e4b13df0-7500-4f81-aaeb-d036a50e73a2.jpg?v=1571709660"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e4b13df0-7500-4f81-aaeb-d036a50e73a2.jpg?v=1571709660","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BB8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e"}