{"id":2125315899503,"title":"HKS - HIPERMAX IV GT Coilover Kit - Lexus IS F USE20(ALL)","handle":"hks-hipermax-iv-gt-coilovers-lexus-is-f-use20all-80230-at002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -17mm (Max Adjustment: 0 ~ -59\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 183.4Nm\u003cbr\u003eCompression Setting: 43.2Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -19mm (Max Adjustment: 0 ~ -117\u003cbr\u003eSpring Rate: F=157(16)\/R=98(10)kg\u003cbr\u003eRebound Setting: 12.85Nm\u003cbr\u003eCompression Setting: 2.35Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIS F | USE20 Chuki | 2008-2009 | NA | 2UR-GSE | V8\u003cbr\u003eIS F | USE20 Kouki | 2009-2014 | NA | 2UR-GSE | V8\u003cbr\u003eIS F | USE20 Zenki | 2007-2008 | NA | 2UR-GSE | V8\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:08:10+08:00","created_at":"2019-02-08T13:08:11+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","2011","2012","2013","2014","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","is-f-use20-chuki-2008-2009-na-2ur-gse-v8","is-f-use20-kouki-2009-2014-na-2ur-gse-v8","is-f-use20-zenki-2007-2008-na-2ur-gse-v8","JP1","lexus","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025499648111,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Lexus IS F USE20(ALL)","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_dd8fe4e1-ec13-4022-8257-594e7bb64cd6.jpg?v=1732249024"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_dd8fe4e1-ec13-4022-8257-594e7bb64cd6.jpg?v=1732249024","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Lexus IS F USE20(ALL) - 80230-AT002 - RZCrewGarage","id":40222680645907,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_dd8fe4e1-ec13-4022-8257-594e7bb64cd6.jpg?v=1732249024"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_dd8fe4e1-ec13-4022-8257-594e7bb64cd6.jpg?v=1732249024","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -17mm (Max Adjustment: 0 ~ -59\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 183.4Nm\u003cbr\u003eCompression Setting: 43.2Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -19mm (Max Adjustment: 0 ~ -117\u003cbr\u003eSpring Rate: F=157(16)\/R=98(10)kg\u003cbr\u003eRebound Setting: 12.85Nm\u003cbr\u003eCompression Setting: 2.35Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIS F | USE20 Chuki | 2008-2009 | NA | 2UR-GSE | V8\u003cbr\u003eIS F | USE20 Kouki | 2009-2014 | NA | 2UR-GSE | V8\u003cbr\u003eIS F | USE20 Zenki | 2007-2008 | NA | 2UR-GSE | V8\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315866735,"title":"HKS - HIPERMAX IV GT Coilover Kit - Lexus HS250h ANF10","handle":"hks-hipermax-iv-gt-coilovers-lexus-hs250h-anf10-80230-at012","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT012\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT012\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 5kg\u003cbr\u003eRebound Setting: 48.1Nm\u003cbr\u003eCompression Setting: 14.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -49mm (Max Adjustment: 0 ~ -71\u003cbr\u003eSpring Rate: F=49(5)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.84Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear:Separate type\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eHS250h | ANF10 | 2009-2018 | H | 2AZ-FXE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:08:09+08:00","created_at":"2019-02-08T13:08:09+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hs250h-anf10-2009-2018-h-2az-fxe-i4","JP1","lexus","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025499615343,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT012","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Lexus HS250h ANF10","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_d9ccd55a-da28-4494-a6d5-09fbdaa22882.jpg?v=1732249022"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_d9ccd55a-da28-4494-a6d5-09fbdaa22882.jpg?v=1732249022","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Lexus HS250h ANF10 - 80230-AT012 - RZCrewGarage","id":40222680547603,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_d9ccd55a-da28-4494-a6d5-09fbdaa22882.jpg?v=1732249022"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_d9ccd55a-da28-4494-a6d5-09fbdaa22882.jpg?v=1732249022","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT012\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT012\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 5kg\u003cbr\u003eRebound Setting: 48.1Nm\u003cbr\u003eCompression Setting: 14.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -49mm (Max Adjustment: 0 ~ -71\u003cbr\u003eSpring Rate: F=49(5)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.84Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear:Separate type\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eHS250h | ANF10 | 2009-2018 | H | 2AZ-FXE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315571823,"title":"HKS - HIPERMAX IV GT Coilover Kit - Daihatsu Copen L880K","handle":"hks-hipermax-iv-gt-coilovers-daihatsu-copen-l880k-80230-ad001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AD001\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AD001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -8mm (Max Adjustment: 0 ~ -32\u003cbr\u003eSpring Rate: 3kg\u003cbr\u003eRebound Setting: 33.3Nm\u003cbr\u003eCompression Setting: 16.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: -3 ~ -24\u003cbr\u003eSpring Rate: F=29(3)\/R=22(2.2)kg\u003cbr\u003eRebound Setting: 2.45Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear:Separate type\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCopen | L880K | 2002-2012 | TC | JB-DET | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:08:00+08:00","created_at":"2019-02-08T13:08:01+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","coilover-kits","coilovers-and-springs","copen-l880k-2002-2012-tc-jb-det-i4","daihatsu","dampening-and-height-adjustable","hks","JP1","ws123"],"price":205040,"price_min":205040,"price_max":205040,"available":true,"price_varies":false,"compare_at_price":274900,"compare_at_price_min":274900,"compare_at_price_max":274900,"compare_at_price_varies":false,"variants":[{"id":20025499320431,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AD001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Daihatsu Copen L880K","public_title":null,"options":["Default Title"],"price":205040,"weight":45000,"compare_at_price":274900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_735376ee-3785-49dd-8c2b-4b5e52210443.jpg?v=1732249002"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_735376ee-3785-49dd-8c2b-4b5e52210443.jpg?v=1732249002","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Daihatsu Copen L880K - 80230-AD001 - RZCrewGarage","id":40222679466259,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_735376ee-3785-49dd-8c2b-4b5e52210443.jpg?v=1732249002"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_735376ee-3785-49dd-8c2b-4b5e52210443.jpg?v=1732249002","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AD001\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AD001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -8mm (Max Adjustment: 0 ~ -32\u003cbr\u003eSpring Rate: 3kg\u003cbr\u003eRebound Setting: 33.3Nm\u003cbr\u003eCompression Setting: 16.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: -3 ~ -24\u003cbr\u003eSpring Rate: F=29(3)\/R=22(2.2)kg\u003cbr\u003eRebound Setting: 2.45Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear:Separate type\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCopen | L880K | 2002-2012 | TC | JB-DET | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315506287,"title":"HKS - HIPERMAX IV GT Coilover Kit - Suzuki Swift Sport ZC31S","handle":"hks-hipermax-iv-gt-coilovers-suzuki-swift-sport-zc31s-80230-as002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AS002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AS002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 63.7Nm\u003cbr\u003eCompression Setting: 17.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -32mm (Max Adjustment: -10 ~ -48\u003cbr\u003eSpring Rate: F=59(6)\/R=39(4)kg\u003cbr\u003eRebound Setting: 2.45Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:07:58+08:00","created_at":"2019-02-08T13:07:59+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2004","2005","2006","2007","2008","2009","2010","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025499254895,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AS002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Suzuki Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_d91885d3-f5a9-4ebd-9225-f37ca1848bf4.jpg?v=1732248998"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_d91885d3-f5a9-4ebd-9225-f37ca1848bf4.jpg?v=1732248998","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Suzuki Swift Sport ZC31S - 80230-AS002 - RZCrewGarage","id":40222679007507,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_d91885d3-f5a9-4ebd-9225-f37ca1848bf4.jpg?v=1732248998"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_d91885d3-f5a9-4ebd-9225-f37ca1848bf4.jpg?v=1732248998","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AS002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AS002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 63.7Nm\u003cbr\u003eCompression Setting: 17.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -32mm (Max Adjustment: -10 ~ -48\u003cbr\u003eSpring Rate: F=59(6)\/R=39(4)kg\u003cbr\u003eRebound Setting: 2.45Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315407983,"title":"HKS - HIPERMAX IV GT Coilover Kit - Suzuki Swift ZC11S","handle":"hks-hipermax-iv-gt-coilovers-suzuki-swift-zc11s-80230-as002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AS002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AS002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 63.7Nm\u003cbr\u003eCompression Setting: 17.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -32mm (Max Adjustment: -10 ~ -48\u003cbr\u003eSpring Rate: F=59(6)\/R=39(4)kg\u003cbr\u003eRebound Setting: 2.45Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC11S | 2004-2010 | NA | M13A | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:07:55+08:00","created_at":"2019-02-08T13:07:56+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2004","2005","2006","2007","2008","2009","2010","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","suzuki","swift-zc11s-2004-2010-na-m13a-i4","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025499156591,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AS002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Suzuki Swift ZC11S","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_1058ebde-8536-481a-b3c0-d03367a32345.jpg?v=1732248991"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_1058ebde-8536-481a-b3c0-d03367a32345.jpg?v=1732248991","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Suzuki Swift ZC11S - 80230-AS002 - RZCrewGarage","id":40222678548755,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_1058ebde-8536-481a-b3c0-d03367a32345.jpg?v=1732248991"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_1058ebde-8536-481a-b3c0-d03367a32345.jpg?v=1732248991","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AS002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AS002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 63.7Nm\u003cbr\u003eCompression Setting: 17.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -32mm (Max Adjustment: -10 ~ -48\u003cbr\u003eSpring Rate: F=59(6)\/R=39(4)kg\u003cbr\u003eRebound Setting: 2.45Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC11S | 2004-2010 | NA | M13A | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315375215,"title":"HKS - HIPERMAX IV GT Coilover Kit - Suzuki Swift ZC21S","handle":"hks-hipermax-iv-gt-coilovers-suzuki-swift-zc21s-80230-as002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AS002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AS002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 63.7Nm\u003cbr\u003eCompression Setting: 17.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -32mm (Max Adjustment: -10 ~ -48\u003cbr\u003eSpring Rate: F=59(6)\/R=39(4)kg\u003cbr\u003eRebound Setting: 2.45Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:07:54+08:00","created_at":"2019-02-08T13:07:54+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2004","2005","2006","2007","2008","2009","2010","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","suzuki","swift-zc21s-2004-2010-na-m15a-i4","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025499123823,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AS002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Suzuki Swift ZC21S","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_a6b600d2-afa0-4eb8-8a51-26fe332c0291.jpg?v=1732248989"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_a6b600d2-afa0-4eb8-8a51-26fe332c0291.jpg?v=1732248989","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Suzuki Swift ZC21S - 80230-AS002 - RZCrewGarage","id":40222678515987,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_a6b600d2-afa0-4eb8-8a51-26fe332c0291.jpg?v=1732248989"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_a6b600d2-afa0-4eb8-8a51-26fe332c0291.jpg?v=1732248989","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AS002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AS002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 63.7Nm\u003cbr\u003eCompression Setting: 17.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -32mm (Max Adjustment: -10 ~ -48\u003cbr\u003eSpring Rate: F=59(6)\/R=39(4)kg\u003cbr\u003eRebound Setting: 2.45Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315342447,"title":"HKS - HIPERMAX IV GT Coilover Kit - Suzuki Swift ZC71S","handle":"hks-hipermax-iv-gt-coilovers-suzuki-swift-zc71s-80230-as002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AS002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AS002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 63.7Nm\u003cbr\u003eCompression Setting: 17.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -32mm (Max Adjustment: -10 ~ -48\u003cbr\u003eSpring Rate: F=59(6)\/R=39(4)kg\u003cbr\u003eRebound Setting: 2.45Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSpacia | MK42S | 2013-2015 | NA | R06A | I3\u003cbr\u003eSwift | ZC71S | 2004-2007 | NA | K12B | I4\u003cbr\u003eSwift | ZC71S | 2007-2010 | NA | K12B | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:07:53+08:00","created_at":"2019-02-08T13:07:53+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2004","2005","2006","2007","2008","2009","2010","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","spacia-mk42s-2013-2015-na-r06a-i3","suzuki","swift-zc71s-2004-2007-na-k12b-i4","swift-zc71s-2007-2010-na-k12b-i4","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025499091055,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AS002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Suzuki Swift ZC71S","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_918aa7fd-cb43-4d2e-a6b5-dc84a159db56.jpg?v=1732248987"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_918aa7fd-cb43-4d2e-a6b5-dc84a159db56.jpg?v=1732248987","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Suzuki Swift ZC71S - 80230-AS002 - RZCrewGarage","id":40222678417683,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_918aa7fd-cb43-4d2e-a6b5-dc84a159db56.jpg?v=1732248987"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_918aa7fd-cb43-4d2e-a6b5-dc84a159db56.jpg?v=1732248987","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AS002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AS002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 63.7Nm\u003cbr\u003eCompression Setting: 17.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -32mm (Max Adjustment: -10 ~ -48\u003cbr\u003eSpring Rate: F=59(6)\/R=39(4)kg\u003cbr\u003eRebound Setting: 2.45Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSpacia | MK42S | 2013-2015 | NA | R06A | I3\u003cbr\u003eSwift | ZC71S | 2004-2007 | NA | K12B | I4\u003cbr\u003eSwift | ZC71S | 2007-2010 | NA | K12B | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315211375,"title":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Legacy Touring Wagon BP5","handle":"hks-hipermax-iv-gt-coilovers-subaru-legacy-touring-wagon-bp5-80230-af005","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF005\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -30mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 64.7Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0 ~ -86\u003cbr\u003eSpring Rate: F=59(6)\/R=69(7)kg\u003cbr\u003eRebound Setting: 9.51Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED A | 2003-2004 | TC | EJ20Y | H4\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED B | 2004-2005 | TC | EJ20Y | H4\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED C | 2005-2006 | TC | EJ20Y | H4\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED D | 2006-2007 | TC | EJ20Y | H4\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED F | 2008-2009 | TC | EJ20Y | H4\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED E | 2007-2008 | TC | EJ20Y | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:07:49+08:00","created_at":"2019-02-08T13:07:49+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","2009","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","legacy-touring-wagon-bp5-applied-a-2003-2004-tc-ej20y-h4","legacy-touring-wagon-bp5-applied-b-2004-2005-tc-ej20y-h4","legacy-touring-wagon-bp5-applied-c-2005-2006-tc-ej20y-h4","legacy-touring-wagon-bp5-applied-d-2006-2007-tc-ej20y-h4","legacy-touring-wagon-bp5-applied-e-2007-2008-tc-ej20y-h4","legacy-touring-wagon-bp5-applied-f-2008-2009-tc-ej20y-h4","subaru","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025498959983,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AF005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Legacy Touring Wagon BP5","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_723aac6d-0c75-44aa-8948-8d9cbcdb8b32.jpg?v=1732248978"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_723aac6d-0c75-44aa-8948-8d9cbcdb8b32.jpg?v=1732248978","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Subaru Legacy Touring Wagon BP5 - 80230-AF005 - RZCrewGarage","id":40222678024467,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_723aac6d-0c75-44aa-8948-8d9cbcdb8b32.jpg?v=1732248978"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_723aac6d-0c75-44aa-8948-8d9cbcdb8b32.jpg?v=1732248978","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF005\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -30mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 64.7Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0 ~ -86\u003cbr\u003eSpring Rate: F=59(6)\/R=69(7)kg\u003cbr\u003eRebound Setting: 9.51Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED A | 2003-2004 | TC | EJ20Y | H4\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED B | 2004-2005 | TC | EJ20Y | H4\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED C | 2005-2006 | TC | EJ20Y | H4\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED D | 2006-2007 | TC | EJ20Y | H4\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED F | 2008-2009 | TC | EJ20Y | H4\u003cbr\u003eLegacy Touring Wagon | BP5 APPLIED E | 2007-2008 | TC | EJ20Y | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315178607,"title":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Legacy Touring Wagon BPE","handle":"hks-hipermax-iv-gt-coilovers-subaru-legacy-touring-wagon-bpe-80230-af005","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF005\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -30mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 64.7Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0 ~ -86\u003cbr\u003eSpring Rate: F=59(6)\/R=69(7)kg\u003cbr\u003eRebound Setting: 9.51Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on BP5.\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED A | 2003-2004 | NA | EZ30 | H6\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED B | 2004-2005 | NA | EZ30 | H6\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED C | 2005-2006 | NA | EZ30 | H6\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED D | 2006-2007 | NA | EZ30 | H6\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED F | 2008-2009 | NA | EZ30 | H6\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED E | 2007-2008 | NA | EZ30 | H6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:07:48+08:00","created_at":"2019-02-08T13:07:48+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","2009","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","legacy-touring-wagon-bpe-applied-a-2003-2004-na-ez30-h6","legacy-touring-wagon-bpe-applied-b-2004-2005-na-ez30-h6","legacy-touring-wagon-bpe-applied-c-2005-2006-na-ez30-h6","legacy-touring-wagon-bpe-applied-d-2006-2007-na-ez30-h6","legacy-touring-wagon-bpe-applied-e-2007-2008-na-ez30-h6","legacy-touring-wagon-bpe-applied-f-2008-2009-na-ez30-h6","subaru","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025498927215,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AF005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Legacy Touring Wagon BPE","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_aa287b3a-edaf-4849-b942-067aafcb1e99.jpg?v=1732248976"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_aa287b3a-edaf-4849-b942-067aafcb1e99.jpg?v=1732248976","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Subaru Legacy Touring Wagon BPE - 80230-AF005 - RZCrewGarage","id":40222677958931,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_aa287b3a-edaf-4849-b942-067aafcb1e99.jpg?v=1732248976"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_aa287b3a-edaf-4849-b942-067aafcb1e99.jpg?v=1732248976","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF005\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -30mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 64.7Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0 ~ -86\u003cbr\u003eSpring Rate: F=59(6)\/R=69(7)kg\u003cbr\u003eRebound Setting: 9.51Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on BP5.\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED A | 2003-2004 | NA | EZ30 | H6\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED B | 2004-2005 | NA | EZ30 | H6\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED C | 2005-2006 | NA | EZ30 | H6\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED D | 2006-2007 | NA | EZ30 | H6\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED F | 2008-2009 | NA | EZ30 | H6\u003cbr\u003eLegacy Touring Wagon | BPE APPLIED E | 2007-2008 | NA | EZ30 | H6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315145839,"title":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Legacy Touring Wagon BR9","handle":"hks-hipermax-iv-gt-coilovers-subaru-legacy-touring-wagon-br9-80230-af004","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -48mm (Max Adjustment: -28 ~ -79\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 84.3Nm\u003cbr\u003eCompression Setting: 15.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -84\u003cbr\u003eSpring Rate: F=59(6)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.59Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLegacy Touring Wagon | BR9 | 2009-2014 | TC | EJ255 | H4\u003cbr\u003eLegacy Touring Wagon | BR9 | 2009-2014 | NA | EJ25 | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:07:46+08:00","created_at":"2019-02-08T13:07:47+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2009","2010","2011","2012","2013","2014","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","legacy-touring-wagon-br9-2009-2014-na-ej25-h4","legacy-touring-wagon-br9-2009-2014-tc-ej255-h4","subaru","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025498894447,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AF004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Legacy Touring Wagon BR9","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_ec7fc21a-6207-40fc-aa85-b1daed9577fd.jpg?v=1732248974"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_ec7fc21a-6207-40fc-aa85-b1daed9577fd.jpg?v=1732248974","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Subaru Legacy Touring Wagon BR9 - 80230-AF004 - RZCrewGarage","id":40222677827859,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_ec7fc21a-6207-40fc-aa85-b1daed9577fd.jpg?v=1732248974"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_ec7fc21a-6207-40fc-aa85-b1daed9577fd.jpg?v=1732248974","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -48mm (Max Adjustment: -28 ~ -79\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 84.3Nm\u003cbr\u003eCompression Setting: 15.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -84\u003cbr\u003eSpring Rate: F=59(6)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.59Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLegacy Touring Wagon | BR9 | 2009-2014 | TC | EJ255 | H4\u003cbr\u003eLegacy Touring Wagon | BR9 | 2009-2014 | NA | EJ25 | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315047535,"title":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Legacy B4 BL5","handle":"hks-hipermax-iv-gt-coilovers-subaru-legacy-b4-bl5-80230-af005","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF005\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 64.7Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -18mm (Max Adjustment: 0 ~ -86\u003cbr\u003eSpring Rate: F=59(6)\/R=69(7)kg\u003cbr\u003eRebound Setting: 9.51Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLegacy B4 | BL5 APPLIED A | 2003-2004 | NA | EJ20 | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED A | 2003-2004 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED B | 2004-2005 | NA | EJ20 | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED B | 2004-2005 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED C | 2005-2006 | NA | EJ20 | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED C | 2005-2006 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED D | 2006-2007 | NA | EJ20 | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED D | 2006-2007 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED E | 2007-2008 | NA | EJ20 | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED E | 2007-2008 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED F | 2008-2009 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED F | 2008-2009 | NA | EJ20 | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:07:44+08:00","created_at":"2019-02-08T13:07:45+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","2009","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","legacy-b4-bl5-applied-a-2003-2004-na-ej20-h4","legacy-b4-bl5-applied-a-2003-2004-tc-ej20y-h4","legacy-b4-bl5-applied-b-2004-2005-na-ej20-h4","legacy-b4-bl5-applied-b-2004-2005-tc-ej20y-h4","legacy-b4-bl5-applied-c-2005-2006-na-ej20-h4","legacy-b4-bl5-applied-c-2005-2006-tc-ej20y-h4","legacy-b4-bl5-applied-d-2006-2007-na-ej20-h4","legacy-b4-bl5-applied-d-2006-2007-tc-ej20y-h4","legacy-b4-bl5-applied-e-2007-2008-na-ej20-h4","legacy-b4-bl5-applied-e-2007-2008-tc-ej20y-h4","legacy-b4-bl5-applied-f-2008-2009-na-ej20-h4","legacy-b4-bl5-applied-f-2008-2009-tc-ej20y-h4","subaru","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025498828911,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AF005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Legacy B4 BL5","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_47244f2c-06ee-46be-acfd-34e0fcb662b2.jpg?v=1732248970"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_47244f2c-06ee-46be-acfd-34e0fcb662b2.jpg?v=1732248970","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Subaru Legacy B4 BL5 - 80230-AF005 - RZCrewGarage","id":40222677631251,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_47244f2c-06ee-46be-acfd-34e0fcb662b2.jpg?v=1732248970"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_47244f2c-06ee-46be-acfd-34e0fcb662b2.jpg?v=1732248970","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF005\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF005\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 64.7Nm\u003cbr\u003eCompression Setting: 20.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -18mm (Max Adjustment: 0 ~ -86\u003cbr\u003eSpring Rate: F=59(6)\/R=69(7)kg\u003cbr\u003eRebound Setting: 9.51Nm\u003cbr\u003eCompression Setting: 1.67Nm\u003cbr\u003e \u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLegacy B4 | BL5 APPLIED A | 2003-2004 | NA | EJ20 | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED A | 2003-2004 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED B | 2004-2005 | NA | EJ20 | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED B | 2004-2005 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED C | 2005-2006 | NA | EJ20 | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED C | 2005-2006 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED D | 2006-2007 | NA | EJ20 | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED D | 2006-2007 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED E | 2007-2008 | NA | EJ20 | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED E | 2007-2008 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED F | 2008-2009 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED F | 2008-2009 | NA | EJ20 | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125315014767,"title":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Legacy B4 BM9","handle":"hks-hipermax-iv-gt-coilovers-subaru-legacy-b4-bm9-80230-af004","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -48mm (Max Adjustment: -28 ~ -79\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 84.3Nm\u003cbr\u003eCompression Setting: 15.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -84\u003cbr\u003eSpring Rate: F=59(6)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.59Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is 'BR9(Touring Wagon)'.\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLegacy B4 | BM9 EJ25 TURBO | 2009-2014 | NA | EJ25 | H4\u003cbr\u003eLegacy B4 | BM9 EJ25 NA | 2009-2014 | NA | EJ25 | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T13:07:43+08:00","created_at":"2019-02-08T13:07:44+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2009","2010","2011","2012","2013","2014","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","legacy-b4-bm9-ej25-na-2009-2014-na-ej25-h4","legacy-b4-bm9-ej25-turbo-2009-2014-na-ej25-h4","subaru","ws122"],"price":219120,"price_min":219120,"price_max":219120,"available":true,"price_varies":false,"compare_at_price":296700,"compare_at_price_min":296700,"compare_at_price_max":296700,"compare_at_price_varies":false,"variants":[{"id":20025498796143,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AF004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Legacy B4 BM9","public_title":null,"options":["Default Title"],"price":219120,"weight":45000,"compare_at_price":296700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_b40704e2-6925-4d74-bbd8-28a95bf573ca.jpg?v=1732248968"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_b40704e2-6925-4d74-bbd8-28a95bf573ca.jpg?v=1732248968","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Subaru Legacy B4 BM9 - 80230-AF004 - RZCrewGarage","id":40222677532947,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_b40704e2-6925-4d74-bbd8-28a95bf573ca.jpg?v=1732248968"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/HKS_GT4.JPG_b40704e2-6925-4d74-bbd8-28a95bf573ca.jpg?v=1732248968","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF004\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -48mm (Max Adjustment: -28 ~ -79\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 84.3Nm\u003cbr\u003eCompression Setting: 15.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -84\u003cbr\u003eSpring Rate: F=59(6)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.59Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is 'BR9(Touring Wagon)'.\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLegacy B4 | BM9 EJ25 TURBO | 2009-2014 | NA | EJ25 | H4\u003cbr\u003eLegacy B4 | BM9 EJ25 NA | 2009-2014 | NA | EJ25 | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2125314752623,"title":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Impreza WRX STi GRB","handle":"hks-hipermax-iv-gt-coilovers-subaru-impreza-wrx-sti-grb-80230-af001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF001\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -79\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -87\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -79\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -87\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:07:34+08:00","created_at":"2019-02-08T13:07:34+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","2011","2012","2013","2014","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","subaru"],"price":228480,"price_min":228480,"price_max":228480,"available":true,"price_varies":false,"compare_at_price":285600,"compare_at_price_min":285600,"compare_at_price_max":285600,"compare_at_price_varies":false,"variants":[{"id":20025498533999,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AF001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Impreza WRX STi GRB","public_title":null,"options":["Default Title"],"price":228480,"weight":26000,"compare_at_price":285600,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_c0cc6580-a446-4eef-be28-66834d81d15d.jpg?v=1571709621"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_c0cc6580-a446-4eef-be28-66834d81d15d.jpg?v=1571709621","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Subaru Impreza WRX STi GRB - 80230-AF001 - RZCrewGarage","id":1850811056239,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_c0cc6580-a446-4eef-be28-66834d81d15d.jpg?v=1571709621"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_c0cc6580-a446-4eef-be28-66834d81d15d.jpg?v=1571709621","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF001\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -79\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -87\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -79\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -87\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125314719855,"title":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Impreza WRX STi GRF","handle":"hks-hipermax-iv-gt-coilovers-subaru-impreza-wrx-sti-grf-80230-af001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF001\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -79\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -88\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -79\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -88\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:07:32+08:00","created_at":"2019-02-08T13:07:33+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","2011","2012","2013","2014","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","subaru"],"price":228480,"price_min":228480,"price_max":228480,"available":true,"price_varies":false,"compare_at_price":285600,"compare_at_price_min":285600,"compare_at_price_max":285600,"compare_at_price_varies":false,"variants":[{"id":20025498501231,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AF001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Impreza WRX STi GRF","public_title":null,"options":["Default Title"],"price":228480,"weight":26000,"compare_at_price":285600,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_9d5e0ae4-7588-433b-bee7-c201298364b9.jpg?v=1571709621"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_9d5e0ae4-7588-433b-bee7-c201298364b9.jpg?v=1571709621","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Subaru Impreza WRX STi GRF - 80230-AF001 - RZCrewGarage","id":1850810990703,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_9d5e0ae4-7588-433b-bee7-c201298364b9.jpg?v=1571709621"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_9d5e0ae4-7588-433b-bee7-c201298364b9.jpg?v=1571709621","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF001\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -79\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -88\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -79\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -34mm (Max Adjustment: 0 ~ -88\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125314687087,"title":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Impreza WRX STi GVB","handle":"hks-hipermax-iv-gt-coilovers-subaru-impreza-wrx-sti-gvb-80230-af001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF001\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -76\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0 ~ -82\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -76\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0 ~ -82\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:07:31+08:00","created_at":"2019-02-08T13:07:32+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","2011","2012","2013","2014","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","subaru"],"price":228480,"price_min":228480,"price_max":228480,"available":true,"price_varies":false,"compare_at_price":285600,"compare_at_price_min":285600,"compare_at_price_max":285600,"compare_at_price_varies":false,"variants":[{"id":20025498468463,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AF001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Subaru Impreza WRX STi GVB","public_title":null,"options":["Default Title"],"price":228480,"weight":26000,"compare_at_price":285600,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_cef779d1-1a82-45c2-b32f-789cb8ebf4c1.jpg?v=1571709621"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_cef779d1-1a82-45c2-b32f-789cb8ebf4c1.jpg?v=1571709621","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Subaru Impreza WRX STi GVB - 80230-AF001 - RZCrewGarage","id":1850810925167,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_cef779d1-1a82-45c2-b32f-789cb8ebf4c1.jpg?v=1571709621"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_cef779d1-1a82-45c2-b32f-789cb8ebf4c1.jpg?v=1571709621","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AF001\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -76\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0 ~ -82\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -76\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 142.2Nm\u003cbr\u003eCompression Setting: 37.3Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0 ~ -82\u003cbr\u003eSpring Rate: F=78(8)\/R=59(6)kg\u003cbr\u003eRebound Setting: 4.61Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2059240177775,"title":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Suzuki - Swift Sport ZC31S","handle":"billion-super-thermo-low-temp-thermostat-68-deg-c-suzuki-swift-zc21s-bssz-43","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Billion\u003cbr\u003ePart Number: BSSZ-43\u003cbr\u003eOpening temperature: 68 Deg C\u003cbr\u003e\u003cbr\u003eThis is a drop-in direct replacement for your OEM unit and will increase the vehicles cooling ability by opening at a lower temperature. An essential part for improving cooling performance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003c!--split--\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003cbr\u003e","published_at":"2019-01-03T18:47:28+08:00","created_at":"2019-01-03T18:47:29+08:00","vendor":"Billion","type":"Thermostats","tags":["2004","2005","2006","2007","2008","2009","2010","billion","JP1","suzuki","swift-zc21s-2004-2010-na-m15a-i4","thermostats","ws19"],"price":9340,"price_min":9340,"price_max":9340,"available":true,"price_varies":false,"compare_at_price":10700,"compare_at_price_min":10700,"compare_at_price_max":10700,"compare_at_price_varies":false,"variants":[{"id":19638557114479,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSZ-43","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Suzuki - Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":9340,"weight":1000,"compare_at_price":10700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_8fb8916c-193d-40e6-9f2c-a883e58df75c.jpg?v=1684744864"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_8fb8916c-193d-40e6-9f2c-a883e58df75c.jpg?v=1684744864","options":["Title"],"media":[{"alt":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Suzuki - Swift ZC21S - BSSZ-43  - RZCREWGARAGE","id":34071320264979,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_8fb8916c-193d-40e6-9f2c-a883e58df75c.jpg?v=1684744864"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_8fb8916c-193d-40e6-9f2c-a883e58df75c.jpg?v=1684744864","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Billion\u003cbr\u003ePart Number: BSSZ-43\u003cbr\u003eOpening temperature: 68 Deg C\u003cbr\u003e\u003cbr\u003eThis is a drop-in direct replacement for your OEM unit and will increase the vehicles cooling ability by opening at a lower temperature. An essential part for improving cooling performance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003c!--split--\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003cbr\u003e"}

{"id":2021214126191,"title":"Link Engine Management - G4+ Thunder - Standalone ECU","handle":"link-engine-management-g4-thunder-standalone-ecu-g4-t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+T\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Thunder is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with Peak and Hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing and Dual E-throttle. The G4+ Thunder runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Xtreem ECU, the Thunder features 2x Onboard wideband lambda control, 2x E-throttle body controller, 2 EGT thermocouple inputs and a real cool 3 axis accelerometer on top of the Xtreem features such as cruise control, Advanced closed loop lambda strategy and dual bank lambda control, anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Thunder:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You need a refine control over your lambda sensor\u003cbr\u003e- You need full control over 2 E-throttle Bodies\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Thunder is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2018-12-10T23:52:28+08:00","created_at":"2018-12-10T23:52:29+08:00","vendor":"Link Engine Management","type":"ECU","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2-cylinders","2-rotors","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","3-cylinders","3-rotors","4-cylinders","4-rotors","5-cylinders","6-cylinders","8-cylinders","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","daihatsu","e-throttle","ecu","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","link-engine-management15","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peak-and-hold-injection","peugeot","porsche","renault","seat","skoda","standalone","subaru","suzuki","throttle-by-cable","toyota","tva","Universal","volkswagen","volvo"],"price":245520,"price_min":245520,"price_max":245520,"available":true,"price_varies":false,"compare_at_price":245520,"compare_at_price_min":245520,"compare_at_price_max":245520,"compare_at_price_varies":false,"variants":[{"id":19264999325807,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G4+T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management - G4+ Thunder - Standalone ECU","public_title":null,"options":["Default Title"],"price":245520,"weight":2000,"compare_at_price":245520,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_T.jpg?v=1571709583"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_T.jpg?v=1571709583","options":["Title"],"media":[{"alt":"Link Engine Management - G4+ Thunder - Standalone ECU - G4+T","id":1706203807855,"position":1,"preview_image":{"aspect_ratio":1.127,"height":568,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_T.jpg?v=1571709583"},"aspect_ratio":1.127,"height":568,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_T.jpg?v=1571709583","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+T\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Thunder is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with Peak and Hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing and Dual E-throttle. The G4+ Thunder runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Xtreem ECU, the Thunder features 2x Onboard wideband lambda control, 2x E-throttle body controller, 2 EGT thermocouple inputs and a real cool 3 axis accelerometer on top of the Xtreem features such as cruise control, Advanced closed loop lambda strategy and dual bank lambda control, anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Thunder:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You need a refine control over your lambda sensor\u003cbr\u003e- You need full control over 2 E-throttle Bodies\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Thunder is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":2021213896815,"title":"Link Engine Management - G4+ Fury - Standalone ECU","handle":"link-engine-management-g4-fury-standalone-ecu-g4-f","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+F\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Fury is a high end advanced level ECU able to manage up to 6 Cylinders, 3 Rotors engine with Sequential injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 6 cylinders engine which comes with Variable valves timing and Single E-throttle. The G4+ Fury runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Xtreem ECU, the Fury features 2x Onboard wideband lambda control on top of the Xtreem features such as cruise control, Advanced closed loop lambda strategy and dual bank lambda control, anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE FURY:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You need a refine control over your lambda sensor\u003cbr\u003e- You need full control over 1 E-throttle Bodies\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Fury is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2018-12-10T23:52:24+08:00","created_at":"2018-12-10T23:52:25+08:00","vendor":"Link Engine Management","type":"ECU","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2-cylinders","2-rotors","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","3-cylinders","3-rotors","4-cylinders","5-cylinders","6-cylinders","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","daihatsu","e-throttle","ecu","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","link-engine-management15","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","seat","sequential-injection","skoda","standalone","subaru","suzuki","throttle-by-cable","toyota","tva","Universal","volkswagen","volvo"],"price":199800,"price_min":199800,"price_max":199800,"available":true,"price_varies":false,"compare_at_price":199800,"compare_at_price_min":199800,"compare_at_price_max":199800,"compare_at_price_varies":false,"variants":[{"id":19264998113391,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G4+F","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management - G4+ Fury - Standalone ECU","public_title":null,"options":["Default Title"],"price":199800,"weight":2000,"compare_at_price":199800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_F.jpg?v=1571709583"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_F.jpg?v=1571709583","options":["Title"],"media":[{"alt":"Link Engine Management - G4+ Fury - Standalone ECU - G4+F","id":1706203349103,"position":1,"preview_image":{"aspect_ratio":1.214,"height":210,"width":255,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_F.jpg?v=1571709583"},"aspect_ratio":1.214,"height":210,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_F.jpg?v=1571709583","width":255}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+F\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Fury is a high end advanced level ECU able to manage up to 6 Cylinders, 3 Rotors engine with Sequential injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 6 cylinders engine which comes with Variable valves timing and Single E-throttle. The G4+ Fury runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Xtreem ECU, the Fury features 2x Onboard wideband lambda control on top of the Xtreem features such as cruise control, Advanced closed loop lambda strategy and dual bank lambda control, anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE FURY:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You need a refine control over your lambda sensor\u003cbr\u003e- You need full control over 1 E-throttle Bodies\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Fury is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":2021213732975,"title":"Link Engine Management - G4+ Xtreme - Standalone ECU","handle":"link-engine-management-g4-xtreme-standalone-ecu-g4-x","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+X\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Xtreem is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with peak and hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing. The G4+ Xtreem runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Storm ECU, the Xtreem features a lot more interesting options such as peak and hold Injection, full E-throttle control (x1), cruise control, Advanced closed loop lambda strategy and dual bank lambda control on top of the Storm anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Xtreem:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You run a peak and hold Injection setup and a single E-throttle body.\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Xtreem is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2018-12-10T23:52:21+08:00","created_at":"2018-12-10T23:52:22+08:00","vendor":"Link Engine Management","type":"ECU","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2-cylinders","2-rotors","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","3-cylinders","3-rotors","4-cylinders","4-rotors","5-cylinders","6-cylinders","8-cylinders","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","daihatsu","e-throttle","ecu","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","link-engine-management15","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peak-and-hold-injection","peugeot","porsche","renault","seat","skoda","standalone","subaru","suzuki","throttle-by-cable","toyota","tva","Universal","volkswagen","volvo"],"price":177000,"price_min":177000,"price_max":177000,"available":true,"price_varies":false,"compare_at_price":177000,"compare_at_price_min":177000,"compare_at_price_max":177000,"compare_at_price_varies":false,"variants":[{"id":19264997326959,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G4+X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management - G4+ Xtreme - Standalone ECU","public_title":null,"options":["Default Title"],"price":177000,"weight":2000,"compare_at_price":177000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_X.jpg?v=1571709583"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_X.jpg?v=1571709583","options":["Title"],"media":[{"alt":"Link Engine Management - G4+ Xtreme - Standalone ECU - G4+X","id":1706203119727,"position":1,"preview_image":{"aspect_ratio":1.064,"height":282,"width":300,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_X.jpg?v=1571709583"},"aspect_ratio":1.064,"height":282,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_X.jpg?v=1571709583","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+X\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Xtreem is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with peak and hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing. The G4+ Xtreem runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Storm ECU, the Xtreem features a lot more interesting options such as peak and hold Injection, full E-throttle control (x1), cruise control, Advanced closed loop lambda strategy and dual bank lambda control on top of the Storm anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Xtreem:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You run a peak and hold Injection setup and a single E-throttle body.\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Xtreem is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":2021213667439,"title":"Link Engine Management - G4+ Storm - Standalone ECU","handle":"link-engine-management-g4-storm-standalone-ecu-g4-s","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+S\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Storm is the perfect entry\/advanced level ECU able to manage up to 8 Cylinders engine with sequential injection direct spark, 8 injections and ignitions drives. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for an highly advanced tune on up to 8 cylinders engine which comes with up to 4 camshaft running Variable valves timing. The G4+ Storm runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Atom and Monsoon ECU, it features a lot more interesting options such as anti lag, rolling anti lag control, full gear shift and launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most B series, K series ( cable throttle), 4G63T, 4A-GE and all tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE STORM:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric OR Boosted (up to) 8 cylinders engine.\u003cbr\u003e- You run a 4 Cams variable valves timing engine such as EJ20\/25.\u003cbr\u003e- You want to cut down on cost using its awesome anti lag, boost control, full gear shift and knock control features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Storm is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2018-12-10T23:52:17+08:00","created_at":"2018-12-10T23:52:18+08:00","vendor":"Link Engine Management","type":"ECU","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2-cylinders","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","3-cylinders","4-cylinders","5-cylinders","6-cylinders","8-cylinders","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","daihatsu","ecu","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","link-engine-management15","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","seat","sequential-injection","skoda","standalone","subaru","suzuki","throttle-by-cable","toyota","tva","Universal","volkswagen","volvo"],"price":158760,"price_min":158760,"price_max":158760,"available":true,"price_varies":false,"compare_at_price":158760,"compare_at_price_min":158760,"compare_at_price_max":158760,"compare_at_price_varies":false,"variants":[{"id":19264997228655,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G4+S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management - G4+ Storm - Standalone ECU","public_title":null,"options":["Default Title"],"price":158760,"weight":2000,"compare_at_price":158760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_S.jpg?v=1571709583"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_S.jpg?v=1571709583","options":["Title"],"media":[{"alt":"Link Engine Management - G4+ Storm - Standalone ECU - G4+S","id":1706202857583,"position":1,"preview_image":{"aspect_ratio":1.214,"height":210,"width":255,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_S.jpg?v=1571709583"},"aspect_ratio":1.214,"height":210,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_S.jpg?v=1571709583","width":255}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+S\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Storm is the perfect entry\/advanced level ECU able to manage up to 8 Cylinders engine with sequential injection direct spark, 8 injections and ignitions drives. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for an highly advanced tune on up to 8 cylinders engine which comes with up to 4 camshaft running Variable valves timing. The G4+ Storm runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Atom and Monsoon ECU, it features a lot more interesting options such as anti lag, rolling anti lag control, full gear shift and launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most B series, K series ( cable throttle), 4G63T, 4A-GE and all tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE STORM:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric OR Boosted (up to) 8 cylinders engine.\u003cbr\u003e- You run a 4 Cams variable valves timing engine such as EJ20\/25.\u003cbr\u003e- You want to cut down on cost using its awesome anti lag, boost control, full gear shift and knock control features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Storm is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":2021213569135,"title":"Link Engine Management - G4+ Monsoon - Standalone ECU","handle":"link-engine-management-g4-monsoon-standalone-ecu-g4-m","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+M\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Monsoon is the perfect entry\/advanced level ECU able to manage 4 Cylinders, 2 Rotors engine with sequential injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for an advanced tune on 4 cylinders engine which comes with Twincam Variable valves timing. The G4+ Monsoon runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Atom, the Monsoon ECU features a lot more interesting options such as anti lag, rolling anti lag control, integrated 4 bar map sensors, full gear shift and launch control. It is really one of our favourite standalone ECU for most B series, K series ( cable throttle), 4G63T, 4A-GE and all tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE MONSOON:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 4 cylinders engine.\u003cbr\u003e- You run a twincam variable valves timing engine such as Mivec, Vvti or Vtec.\u003cbr\u003e- You want to cut down on cost using its awesome anti lag, boost control and full gear shift features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Monsoon is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2018-12-10T23:52:14+08:00","created_at":"2018-12-10T23:52:15+08:00","vendor":"Link Engine Management","type":"ECU","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2-cylinders","2-rotors","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","3-cylinders","4-cylinders","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","daihatsu","ecu","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","link-engine-management15","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","seat","sequential-injection","skoda","standalone","subaru","suzuki","throttle-by-cable","toyota","tva","Universal","volkswagen","volvo"],"price":117600,"price_min":117600,"price_max":117600,"available":true,"price_varies":false,"compare_at_price":117600,"compare_at_price_min":117600,"compare_at_price_max":117600,"compare_at_price_varies":false,"variants":[{"id":19264997064815,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G4+M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management - G4+ Monsoon - Standalone ECU","public_title":null,"options":["Default Title"],"price":117600,"weight":2000,"compare_at_price":117600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_M.jpg?v=1571709583"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_M.jpg?v=1571709583","options":["Title"],"media":[{"alt":"Link Engine Management - G4+ Monsoon - Standalone ECU - G4+M","id":1706202693743,"position":1,"preview_image":{"aspect_ratio":1.214,"height":210,"width":255,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_M.jpg?v=1571709583"},"aspect_ratio":1.214,"height":210,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_M.jpg?v=1571709583","width":255}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+M\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Monsoon is the perfect entry\/advanced level ECU able to manage 4 Cylinders, 2 Rotors engine with sequential injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for an advanced tune on 4 cylinders engine which comes with Twincam Variable valves timing. The G4+ Monsoon runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Atom, the Monsoon ECU features a lot more interesting options such as anti lag, rolling anti lag control, integrated 4 bar map sensors, full gear shift and launch control. It is really one of our favourite standalone ECU for most B series, K series ( cable throttle), 4G63T, 4A-GE and all tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE MONSOON:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 4 cylinders engine.\u003cbr\u003e- You run a twincam variable valves timing engine such as Mivec, Vvti or Vtec.\u003cbr\u003e- You want to cut down on cost using its awesome anti lag, boost control and full gear shift features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Monsoon is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":2021213470831,"title":"Link Engine Management - G4+ Atom 2 - Standalone ECU","handle":"link-engine-management-g4-atom-2-standalone-ecu-g4-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+A\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Atom is the perfect entry level ECU able to manage 4 Cylinders, 2 Rotors engine with sequential injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for a simple tune on 4 cylinders engine which does not utilise a Variable timing type of Cams control. The G4+ Atom II runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE ATOM 2:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine and need a stable tuning ECU.\u003cbr\u003e- You do not need an expensive ecu running variable timing such as Mivec, VVTI, Vtec or tons of features and sensors.\u003cbr\u003e- It is the perfect upgrade from a Piggy back ECU or reflash!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2018-12-10T23:52:11+08:00","created_at":"2018-12-10T23:52:11+08:00","vendor":"Link Engine Management","type":"ECU","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2-cylinders","2-rotors","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","3-cylinders","4-cylinders","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","daihatsu","ecu","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","link-engine-management15","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","seat","sequential-injection","skoda","standalone","subaru","suzuki","throttle-by-cable","toyota","tva","Universal","volkswagen","volvo"],"price":90240,"price_min":90240,"price_max":90240,"available":true,"price_varies":false,"compare_at_price":90240,"compare_at_price_min":90240,"compare_at_price_max":90240,"compare_at_price_varies":false,"variants":[{"id":19264996180079,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G4+A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management - G4+ Atom 2 - Standalone ECU","public_title":null,"options":["Default Title"],"price":90240,"weight":2000,"compare_at_price":90240,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_A.jpg?v=1571709583"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_A.jpg?v=1571709583","options":["Title"],"media":[{"alt":"Link Engine Management - G4+ Atom 2 - Standalone ECU - G4+A","id":1706202529903,"position":1,"preview_image":{"aspect_ratio":1.214,"height":210,"width":255,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_A.jpg?v=1571709583"},"aspect_ratio":1.214,"height":210,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G4_A.jpg?v=1571709583","width":255}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+A\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Atom is the perfect entry level ECU able to manage 4 Cylinders, 2 Rotors engine with sequential injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for a simple tune on 4 cylinders engine which does not utilise a Variable timing type of Cams control. The G4+ Atom II runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE ATOM 2:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine and need a stable tuning ECU.\u003cbr\u003e- You do not need an expensive ecu running variable timing such as Mivec, VVTI, Vtec or tons of features and sensors.\u003cbr\u003e- It is the perfect upgrade from a Piggy back ECU or reflash!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":2021149343855,"title":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size)","handle":"grams-performance-injector-kit-mazda-mx-5-miata-roadster-nc-14mm-injector-size","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NCEC RS | 2008-2015 | NA | LF-VE RS | I4\u003c!--split--\u003e","published_at":"2018-12-10T23:03:13+08:00","created_at":"2018-12-10T23:03:21+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2200cc","550cc","750cc","grams-performance","grams-performance25.5","injector-kits","mazda","mx-5-miata-roadster-ncec-2005-2008-na-lf-ve-i4","mx-5-miata-roadster-ncec-rs-2008-2015-na-lf-ve-rs-i4","top-feed","tva"],"price":45600,"price_min":45600,"price_max":103080,"available":true,"price_varies":true,"compare_at_price":45600,"compare_at_price_min":45600,"compare_at_price_max":103080,"compare_at_price_varies":true,"variants":[{"id":19263911624815,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-1002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - 550cc","public_title":"550cc","options":["550cc"],"price":45600,"weight":3000,"compare_at_price":45600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263911657583,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-1002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - 750cc","public_title":"750cc","options":["750cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263911690351,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-1002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - 1000cc","public_title":"1000cc","options":["1000cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263911723119,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-1002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - 1150cc","public_title":"1150cc","options":["1150cc"],"price":67920,"weight":3000,"compare_at_price":67920,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263911755887,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-1002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - 1600cc","public_title":"1600cc","options":["1600cc"],"price":103080,"weight":3000,"compare_at_price":103080,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263911788655,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-1002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - 2200cc","public_title":"2200cc","options":["2200cc"],"price":98400,"weight":3000,"compare_at_price":98400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_a13017e2-340f-4583-989f-346c8bf905bd.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_7330fb23-7138-4229-90a6-bfead8571ce0.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_7b21acc4-016e-4778-b8b5-fe1b6c3cbe77.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_2b08caa9-0abe-4323-96ee-8a0db5c0cbbc.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_dba8c3c0-23a5-4815-9ec0-1118e7495afc.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_ce1b4125-5e8a-4101-a377-0c333edb6ad6.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_a13017e2-340f-4583-989f-346c8bf905bd.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - Rzcrewgarage","id":1706007855215,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_a13017e2-340f-4583-989f-346c8bf905bd.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_a13017e2-340f-4583-989f-346c8bf905bd.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - Rzcrewgarage","id":1706007887983,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_7330fb23-7138-4229-90a6-bfead8571ce0.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_7330fb23-7138-4229-90a6-bfead8571ce0.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - Rzcrewgarage","id":1706007920751,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_7b21acc4-016e-4778-b8b5-fe1b6c3cbe77.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_7b21acc4-016e-4778-b8b5-fe1b6c3cbe77.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - Rzcrewgarage","id":1706007953519,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_2b08caa9-0abe-4323-96ee-8a0db5c0cbbc.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_2b08caa9-0abe-4323-96ee-8a0db5c0cbbc.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - Rzcrewgarage","id":1706007986287,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_dba8c3c0-23a5-4815-9ec0-1118e7495afc.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_dba8c3c0-23a5-4815-9ec0-1118e7495afc.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mazda - MX-5 Miata Roadster NC - ( 14mm Injector size) - Rzcrewgarage","id":1706008019055,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_ce1b4125-5e8a-4101-a377-0c333edb6ad6.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_ce1b4125-5e8a-4101-a377-0c333edb6ad6.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NCEC RS | 2008-2015 | NA | LF-VE RS | I4\u003c!--split--\u003e"}

{"id":2021148819567,"title":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A","handle":"grams-performance-injector-kit-mitsubishi-lancer-evolution-x-cz4a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e","published_at":"2018-12-10T23:02:50+08:00","created_at":"2018-12-10T23:02:56+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2200cc","550cc","750cc","grams-performance","grams-performance25.5","injector-kits","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","top-feed","tva"],"price":45600,"price_min":45600,"price_max":103080,"available":true,"price_varies":true,"compare_at_price":45600,"compare_at_price_min":45600,"compare_at_price_max":103080,"compare_at_price_varies":true,"variants":[{"id":19263905890415,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-0601","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - 550cc","public_title":"550cc","options":["550cc"],"price":45600,"weight":3000,"compare_at_price":45600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263905923183,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-0601","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - 750cc","public_title":"750cc","options":["750cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263905955951,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-0601","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - 1000cc","public_title":"1000cc","options":["1000cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263905988719,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-0601","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - 1150cc","public_title":"1150cc","options":["1150cc"],"price":67920,"weight":3000,"compare_at_price":67920,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263906021487,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-0601","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - 1600cc","public_title":"1600cc","options":["1600cc"],"price":103080,"weight":3000,"compare_at_price":103080,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263906054255,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-0601","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - 2200cc","public_title":"2200cc","options":["2200cc"],"price":98400,"weight":3000,"compare_at_price":98400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_02aafa8a-a7e5-474f-aeb3-69930f520e5f.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_2e5fdc98-5c1e-4c5a-8e14-75fa7a68ebd2.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_ff3de19e-8daf-4860-9fec-8a5721d54b96.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_78ee042d-5d75-4e94-bb82-c606932820ef.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_c1fe5015-db8f-45cf-833a-41efd8f12dab.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_701e4fad-0e59-45fe-a40b-a9e9ace94d16.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_02aafa8a-a7e5-474f-aeb3-69930f520e5f.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - Rzcrewgarage","id":1706005594223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_02aafa8a-a7e5-474f-aeb3-69930f520e5f.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_02aafa8a-a7e5-474f-aeb3-69930f520e5f.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - Rzcrewgarage","id":1706005626991,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_2e5fdc98-5c1e-4c5a-8e14-75fa7a68ebd2.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_2e5fdc98-5c1e-4c5a-8e14-75fa7a68ebd2.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - Rzcrewgarage","id":1706005659759,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_ff3de19e-8daf-4860-9fec-8a5721d54b96.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_ff3de19e-8daf-4860-9fec-8a5721d54b96.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - Rzcrewgarage","id":1706005692527,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_78ee042d-5d75-4e94-bb82-c606932820ef.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_78ee042d-5d75-4e94-bb82-c606932820ef.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - Rzcrewgarage","id":1706005725295,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_c1fe5015-db8f-45cf-833a-41efd8f12dab.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_c1fe5015-db8f-45cf-833a-41efd8f12dab.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mitsubishi - Lancer Evolution X CZ4A - Rzcrewgarage","id":1706005758063,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_701e4fad-0e59-45fe-a40b-a9e9ace94d16.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_701e4fad-0e59-45fe-a40b-a9e9ace94d16.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e"}

{"id":2021148295279,"title":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size)","handle":"grams-performance-injector-kit-toyota-1nz-fe-11mm-injector-size","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSiena | GSL30L | 2010-2018 | NA | 1NZ-FE | I4\u003cbr\u003eRactis | NCP120 | 2010-2018 | NA | 1NZ-FE | I4\u003cbr\u003eVitz | NCP131 | 2010-2018 | NA | 1NZ-FE | I4\u003cbr\u003eVitz | NCP91 | 2005-2010 | NA | 1NZ-FE | I4\u003cbr\u003eVitz G's | NCP131 | 2011-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Fielder | NZE121G | 2000-2006 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla ranks Alex | NZE121 | 2001-2006 | NA | 1NZ-FE | I4\u003cbr\u003eFan Cargo | NCP21 | 1999-2005 | NA | 1NZ-FE | I4\u003cbr\u003eFan Cargo | NCP25 | 1999-2005 | NA | 1NZ-FE | I4\u003cbr\u003ePlatts | NCP16 | 1999-2005 | NA | 1NZ-FE | I4\u003cbr\u003eAuris | NZE151H | 2006-2012 | NA | 1NZ-FE | I4\u003cbr\u003eAuris | NZE154H | 2006-2012 | NA | 1NZ-FE | I4\u003cbr\u003eAuris | NZE181H | 2008-2018 | NA | 1NZ-FE | I4\u003cbr\u003eBB | NCP21 | 2000-2005 | NA | 1NZ-FE | I4\u003cbr\u003eBB | NCP25 | 2000-2005 | NA | 1NZ-FE | I4\u003cbr\u003eBB | NCP34 | 2000-2005 | NA | 1NZ-FE | I4\u003cbr\u003eBB | NCP31 | 2000-2005 | NA | 1NZ-FE | I4\u003cbr\u003eBB | NCP35 | 2000-2005 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla | NZE121 | 2000-2007 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla | NZE124 | 2000-2007 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Axio | NZE141 | 2006-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Axio | NZE144 | 2006-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Axio | NZE161 | 2012-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Axio | NZE164 | 2012-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Fielder | NZE144G | 2009-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Fielder | NZE141G | 2009-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Fielder | NZE161G | 2012-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Fielder | NZE164G | 2012-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Rumion | NZE151N | 2007-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Runx Allex | NZE121 | 2001-2006 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Runx Allex | NZE124 | 2001-2006 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Sedan | NZE121 | 2001-2006 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Sedan | NZE124 | 2001-2006 | NA | 1NZ-FE | I4\u003cbr\u003eFuncargo | NCP21 | 1999-2005 | NA | 1NZ-FE | I4\u003cbr\u003eFuncargo | NCP25 | 1999-2005 | NA | 1NZ-FE | I4\u003cbr\u003eIST | NCP110 | 2007-2016 | NA | 1NZ-FE | I4\u003cbr\u003eIST | NCP115 | 2007-2016 | NA | 1NZ-FE | I4\u003cbr\u003eIST | NCP61 | 2002-2007 | NA | 1NZ-FE | I4\u003cbr\u003eIST | NCP65 | 2002-2007 | NA | 1NZ-FE | I4\u003cbr\u003ePorte | NNP11 | 2004-2012 | NA | 1NZ-FE | I4\u003cbr\u003eSienta | NCP81G | 2003-2015 | NA | 1NZ-FE | I4\u003cbr\u003eSienta | NCP85G | 2003-2015 | NA | 1NZ-FE | I4\u003cbr\u003eVios | NCP42 | 2002-2005 | NA | 1NZ-FE | I4\u003cbr\u003eVios | NCP42 | 2005-2007 | NA | 1NZ-FE | I4\u003cbr\u003eVios | NCP93 | 2007-2013 | NA | 1NZ-FE | I4\u003cbr\u003eVios | NCP150 | 2013-2018 | NA | 1NZ-FE | I4\u003c!--split--\u003e","published_at":"2018-12-10T23:02:15+08:00","created_at":"2018-12-10T23:02:22+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2200cc","550cc","750cc","auris-nze151h-2006-2012-na-1nz-fe-i4","auris-nze154h-2006-2012-na-1nz-fe-i4","auris-nze181h-2008-2018-na-1nz-fe-i4","bb-ncp21-2000-2005-na-1nz-fe-i4","bb-ncp25-2000-2005-na-1nz-fe-i4","bb-ncp31-2000-2005-na-1nz-fe-i4","bb-ncp34-2000-2005-na-1nz-fe-i4","bb-ncp35-2000-2005-na-1nz-fe-i4","corolla-axio-nze141-2006-2018-na-1nz-fe-i4","corolla-axio-nze144-2006-2018-na-1nz-fe-i4","corolla-axio-nze161-2012-2018-na-1nz-fe-i4","corolla-axio-nze164-2012-2018-na-1nz-fe-i4","corolla-fielder-nze121g-2000-2006-na-1nz-fe-i4","corolla-fielder-nze141g-2009-2018-na-1nz-fe-i4","corolla-fielder-nze144g-2009-2018-na-1nz-fe-i4","corolla-fielder-nze161g-2012-2018-na-1nz-fe-i4","corolla-fielder-nze164g-2012-2018-na-1nz-fe-i4","corolla-nze121-2000-2007-na-1nz-fe-i4","corolla-nze124-2000-2007-na-1nz-fe-i4","corolla-ranks-alex-nze121-2001-2006-na-1nz-fe-i4","corolla-rumion-nze151n-2007-2018-na-1nz-fe-i4","corolla-runx-allex-nze121-2001-2006-na-1nz-fe-i4","corolla-runx-allex-nze124-2001-2006-na-1nz-fe-i4","corolla-sedan-nze121-2001-2006-na-1nz-fe-i4","corolla-sedan-nze124-2001-2006-na-1nz-fe-i4","fan-cargo-ncp21-1999-2005-na-1nz-fe-i4","fan-cargo-ncp25-1999-2005-na-1nz-fe-i4","funcargo-ncp21-1999-2005-na-1nz-fe-i4","funcargo-ncp25-1999-2005-na-1nz-fe-i4","grams-performance","grams-performance25.5","injector-kits","ist-ncp110-2007-2016-na-1nz-fe-i4","ist-ncp115-2007-2016-na-1nz-fe-i4","ist-ncp61-2002-2007-na-1nz-fe-i4","ist-ncp65-2002-2007-na-1nz-fe-i4","platts-ncp16-1999-2005-na-1nz-fe-i4","porte-nnp11-2004-2012-na-1nz-fe-i4","ractis-ncp120-2010-2018-na-1nz-fe-i4","siena-gsl30l-2010-2018-na-1nz-fe-i4","sienta-ncp81g-2003-2015-na-1nz-fe-i4","sienta-ncp85g-2003-2015-na-1nz-fe-i4","top-feed","toyota","tva","vios-ncp150-2013-2018-na-1nz-fe-i4","vios-ncp42-2002-2005-na-1nz-fe-i4","vios-ncp42-2005-2007-na-1nz-fe-i4","vios-ncp93-2007-2013-na-1nz-fe-i4","vitz-gs-ncp131-2011-2018-na-1nz-fe-i4","vitz-ncp131-2010-2018-na-1nz-fe-i4","vitz-ncp91-2005-2010-na-1nz-fe-i4"],"price":45600,"price_min":45600,"price_max":103080,"available":true,"price_varies":true,"compare_at_price":45600,"compare_at_price_min":45600,"compare_at_price_max":103080,"compare_at_price_varies":true,"variants":[{"id":19263899893871,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - 550cc","public_title":"550cc","options":["550cc"],"price":45600,"weight":3000,"compare_at_price":45600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263899926639,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - 750cc","public_title":"750cc","options":["750cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263899959407,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - 1000cc","public_title":"1000cc","options":["1000cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263899992175,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - 1150cc","public_title":"1150cc","options":["1150cc"],"price":67920,"weight":3000,"compare_at_price":67920,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263900024943,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - 1600cc","public_title":"1600cc","options":["1600cc"],"price":103080,"weight":3000,"compare_at_price":103080,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263900057711,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - 2200cc","public_title":"2200cc","options":["2200cc"],"price":98400,"weight":3000,"compare_at_price":98400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_84380387-cc10-4256-a785-8d9cf791a71f.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_4b8ea5bc-3b25-4fe8-8bc4-b0fa8edf75a5.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_6f2d169f-7504-438e-bb2d-e1abaedffae0.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_3f646d3b-c0f3-45e0-af20-de4bcc041de6.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_155fffef-4ebb-4e08-97b2-11828469cb1d.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_0b6369ce-72a2-433c-ad9d-2ec4cf617f09.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_84380387-cc10-4256-a785-8d9cf791a71f.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - Rzcrewgarage","id":1706002219119,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_84380387-cc10-4256-a785-8d9cf791a71f.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_84380387-cc10-4256-a785-8d9cf791a71f.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - Rzcrewgarage","id":1706002251887,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_4b8ea5bc-3b25-4fe8-8bc4-b0fa8edf75a5.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_4b8ea5bc-3b25-4fe8-8bc4-b0fa8edf75a5.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - Rzcrewgarage","id":1706002284655,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_6f2d169f-7504-438e-bb2d-e1abaedffae0.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_6f2d169f-7504-438e-bb2d-e1abaedffae0.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - Rzcrewgarage","id":1706002317423,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_3f646d3b-c0f3-45e0-af20-de4bcc041de6.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_3f646d3b-c0f3-45e0-af20-de4bcc041de6.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - Rzcrewgarage","id":1706002350191,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_155fffef-4ebb-4e08-97b2-11828469cb1d.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_155fffef-4ebb-4e08-97b2-11828469cb1d.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Toyota - 1NZ-FE - ( 11mm Injector size) - Rzcrewgarage","id":1706002382959,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_0b6369ce-72a2-433c-ad9d-2ec4cf617f09.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_0b6369ce-72a2-433c-ad9d-2ec4cf617f09.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSiena | GSL30L | 2010-2018 | NA | 1NZ-FE | I4\u003cbr\u003eRactis | NCP120 | 2010-2018 | NA | 1NZ-FE | I4\u003cbr\u003eVitz | NCP131 | 2010-2018 | NA | 1NZ-FE | I4\u003cbr\u003eVitz | NCP91 | 2005-2010 | NA | 1NZ-FE | I4\u003cbr\u003eVitz G's | NCP131 | 2011-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Fielder | NZE121G | 2000-2006 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla ranks Alex | NZE121 | 2001-2006 | NA | 1NZ-FE | I4\u003cbr\u003eFan Cargo | NCP21 | 1999-2005 | NA | 1NZ-FE | I4\u003cbr\u003eFan Cargo | NCP25 | 1999-2005 | NA | 1NZ-FE | I4\u003cbr\u003ePlatts | NCP16 | 1999-2005 | NA | 1NZ-FE | I4\u003cbr\u003eAuris | NZE151H | 2006-2012 | NA | 1NZ-FE | I4\u003cbr\u003eAuris | NZE154H | 2006-2012 | NA | 1NZ-FE | I4\u003cbr\u003eAuris | NZE181H | 2008-2018 | NA | 1NZ-FE | I4\u003cbr\u003eBB | NCP21 | 2000-2005 | NA | 1NZ-FE | I4\u003cbr\u003eBB | NCP25 | 2000-2005 | NA | 1NZ-FE | I4\u003cbr\u003eBB | NCP34 | 2000-2005 | NA | 1NZ-FE | I4\u003cbr\u003eBB | NCP31 | 2000-2005 | NA | 1NZ-FE | I4\u003cbr\u003eBB | NCP35 | 2000-2005 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla | NZE121 | 2000-2007 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla | NZE124 | 2000-2007 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Axio | NZE141 | 2006-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Axio | NZE144 | 2006-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Axio | NZE161 | 2012-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Axio | NZE164 | 2012-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Fielder | NZE144G | 2009-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Fielder | NZE141G | 2009-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Fielder | NZE161G | 2012-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Fielder | NZE164G | 2012-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Rumion | NZE151N | 2007-2018 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Runx Allex | NZE121 | 2001-2006 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Runx Allex | NZE124 | 2001-2006 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Sedan | NZE121 | 2001-2006 | NA | 1NZ-FE | I4\u003cbr\u003eCorolla Sedan | NZE124 | 2001-2006 | NA | 1NZ-FE | I4\u003cbr\u003eFuncargo | NCP21 | 1999-2005 | NA | 1NZ-FE | I4\u003cbr\u003eFuncargo | NCP25 | 1999-2005 | NA | 1NZ-FE | I4\u003cbr\u003eIST | NCP110 | 2007-2016 | NA | 1NZ-FE | I4\u003cbr\u003eIST | NCP115 | 2007-2016 | NA | 1NZ-FE | I4\u003cbr\u003eIST | NCP61 | 2002-2007 | NA | 1NZ-FE | I4\u003cbr\u003eIST | NCP65 | 2002-2007 | NA | 1NZ-FE | I4\u003cbr\u003ePorte | NNP11 | 2004-2012 | NA | 1NZ-FE | I4\u003cbr\u003eSienta | NCP81G | 2003-2015 | NA | 1NZ-FE | I4\u003cbr\u003eSienta | NCP85G | 2003-2015 | NA | 1NZ-FE | I4\u003cbr\u003eVios | NCP42 | 2002-2005 | NA | 1NZ-FE | I4\u003cbr\u003eVios | NCP42 | 2005-2007 | NA | 1NZ-FE | I4\u003cbr\u003eVios | NCP93 | 2007-2013 | NA | 1NZ-FE | I4\u003cbr\u003eVios | NCP150 | 2013-2018 | NA | 1NZ-FE | I4\u003c!--split--\u003e"}

{"id":2021147836527,"title":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size)","handle":"grams-performance-injector-kit-toyota-1zz-fe-ge-11mm-injector-size","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eWish | ZNE10G | 2003-2009 | NA | 1ZZ-FE | I4\u003cbr\u003eCelica | ZZT230 | 1999-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eCaldina | ZZT241W | 2002-2007 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla | ZZE122 | 2000-2007 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla | ZZE124 | 2000-2007 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla Fielder | ZZE122G | 2000-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla Fielder | ZZE124G | 2000-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla Runx Allex | ZZE122 | 2001-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla Runx Allex | ZZE124 | 2001-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla Sedan | ZZE122 | 2001-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eMR-S | ZZW30 Zenki | 1999-2003 | NA | 1ZZ-FE | I4\u003cbr\u003eMR-S | ZZW30 Kouki | 2003-2007 | NA | 1ZZ-FE | I4\u003cbr\u003eWish | ZNE14G | 2003-2009 | NA | 1ZZ-FE | I4\u003c!--split--\u003e","published_at":"2018-12-10T23:02:00+08:00","created_at":"2018-12-10T23:02:06+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2200cc","550cc","750cc","caldina-zzt241w-2002-2007-na-1zz-fe-i4","celica-zzt230-1999-2006-na-1zz-fe-i4","corolla-fielder-zze122g-2000-2006-na-1zz-fe-i4","corolla-fielder-zze124g-2000-2006-na-1zz-fe-i4","corolla-runx-allex-zze122-2001-2006-na-1zz-fe-i4","corolla-runx-allex-zze124-2001-2006-na-1zz-fe-i4","corolla-sedan-zze122-2001-2006-na-1zz-fe-i4","corolla-zze122-2000-2007-na-1zz-fe-i4","corolla-zze124-2000-2007-na-1zz-fe-i4","grams-performance","grams-performance25.5","injector-kits","mr-s-zzw30-kouki-2003-2007-na-1zz-fe-i4","mr-s-zzw30-zenki-1999-2003-na-1zz-fe-i4","top-feed","toyota","tva","wish-zne10g-2003-2009-na-1zz-fe-i4","wish-zne14g-2003-2009-na-1zz-fe-i4"],"price":45600,"price_min":45600,"price_max":103080,"available":true,"price_varies":true,"compare_at_price":45600,"compare_at_price_min":45600,"compare_at_price_max":103080,"compare_at_price_varies":true,"variants":[{"id":19263892291695,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - 550cc","public_title":"550cc","options":["550cc"],"price":45600,"weight":3000,"compare_at_price":45600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263892324463,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - 750cc","public_title":"750cc","options":["750cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263892357231,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - 1000cc","public_title":"1000cc","options":["1000cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263892389999,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - 1150cc","public_title":"1150cc","options":["1150cc"],"price":67920,"weight":3000,"compare_at_price":67920,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263892422767,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - 1600cc","public_title":"1600cc","options":["1600cc"],"price":103080,"weight":3000,"compare_at_price":103080,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263892455535,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-0802","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - 2200cc","public_title":"2200cc","options":["2200cc"],"price":98400,"weight":3000,"compare_at_price":98400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_b297740d-76ff-4744-9ca2-13a3d2210908.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_b1973fa6-4a84-44fb-9784-683a477f1e80.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_4544eae5-02bf-49a4-aaeb-6bf4cd2ebba3.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_0dae4d8c-747b-4daa-b80a-b06069589f1a.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_49f05e54-a61a-4de1-974e-1d74533e175f.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_2ae33a43-7000-4b4e-9073-a9cf85a70d59.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_b297740d-76ff-4744-9ca2-13a3d2210908.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - Rzcrewgarage","id":1706000679023,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_b297740d-76ff-4744-9ca2-13a3d2210908.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_b297740d-76ff-4744-9ca2-13a3d2210908.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - Rzcrewgarage","id":1706000711791,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_b1973fa6-4a84-44fb-9784-683a477f1e80.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_b1973fa6-4a84-44fb-9784-683a477f1e80.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - Rzcrewgarage","id":1706000744559,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_4544eae5-02bf-49a4-aaeb-6bf4cd2ebba3.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_4544eae5-02bf-49a4-aaeb-6bf4cd2ebba3.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - Rzcrewgarage","id":1706000777327,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_0dae4d8c-747b-4daa-b80a-b06069589f1a.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_0dae4d8c-747b-4daa-b80a-b06069589f1a.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - Rzcrewgarage","id":1706000810095,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_49f05e54-a61a-4de1-974e-1d74533e175f.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_49f05e54-a61a-4de1-974e-1d74533e175f.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Toyota - 1ZZ-FE\/GE - ( 11mm Injector size) - Rzcrewgarage","id":1706000842863,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_2ae33a43-7000-4b4e-9073-a9cf85a70d59.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_2ae33a43-7000-4b4e-9073-a9cf85a70d59.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eWish | ZNE10G | 2003-2009 | NA | 1ZZ-FE | I4\u003cbr\u003eCelica | ZZT230 | 1999-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eCaldina | ZZT241W | 2002-2007 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla | ZZE122 | 2000-2007 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla | ZZE124 | 2000-2007 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla Fielder | ZZE122G | 2000-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla Fielder | ZZE124G | 2000-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla Runx Allex | ZZE122 | 2001-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla Runx Allex | ZZE124 | 2001-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eCorolla Sedan | ZZE122 | 2001-2006 | NA | 1ZZ-FE | I4\u003cbr\u003eMR-S | ZZW30 Zenki | 1999-2003 | NA | 1ZZ-FE | I4\u003cbr\u003eMR-S | ZZW30 Kouki | 2003-2007 | NA | 1ZZ-FE | I4\u003cbr\u003eWish | ZNE14G | 2003-2009 | NA | 1ZZ-FE | I4\u003c!--split--\u003e"}

{"id":2021150163055,"title":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed)","handle":"grams-performance-injector-kit-subaru-legacy-b4-bl5-applied-a-to-f-most-ej20-25-top-feed","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLegacy B4 | BL5 APPLIED A | 2003-2004 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED B | 2004-2005 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED C | 2005-2006 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED D | 2006-2007 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED E | 2007-2008 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED F | 2008-2009 | TC | EJ20Y | H4\u003c!--split--\u003e","published_at":"2018-12-10T23:03:50+08:00","created_at":"2018-12-10T23:03:57+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2003","2004","2005","2006","2007","2008","2009","2200cc","550cc","750cc","grams-performance","grams-performance25.5","injector-kits","legacy-b4-bl5-applied-a-2003-2004-tc-ej20y-h4","legacy-b4-bl5-applied-b-2004-2005-tc-ej20y-h4","legacy-b4-bl5-applied-c-2005-2006-tc-ej20y-h4","legacy-b4-bl5-applied-d-2006-2007-tc-ej20y-h4","legacy-b4-bl5-applied-e-2007-2008-tc-ej20y-h4","legacy-b4-bl5-applied-f-2008-2009-tc-ej20y-h4","subaru","top-feed","tva"],"price":45600,"price_min":45600,"price_max":103080,"available":true,"price_varies":true,"compare_at_price":45600,"compare_at_price_min":45600,"compare_at_price_max":103080,"compare_at_price_varies":true,"variants":[{"id":19263922995311,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - 550cc","public_title":"550cc","options":["550cc"],"price":45600,"weight":3000,"compare_at_price":45600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263923028079,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - 750cc","public_title":"750cc","options":["750cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263923060847,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - 1000cc","public_title":"1000cc","options":["1000cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263923093615,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - 1150cc","public_title":"1150cc","options":["1150cc"],"price":67920,"weight":3000,"compare_at_price":67920,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263923126383,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - 1600cc","public_title":"1600cc","options":["1600cc"],"price":103080,"weight":3000,"compare_at_price":103080,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263923159151,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - 2200cc","public_title":"2200cc","options":["2200cc"],"price":98400,"weight":3000,"compare_at_price":98400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_52ae477c-f5e8-4453-a1c2-44edadf0c0cf.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_265acce0-cb8f-47ec-a06b-22c2e0ef5457.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_5a3bd4e4-9d86-4f66-bbea-22889921d2b3.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_81a56ca3-656f-4acc-8ffe-7ba95de9ddd1.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_3fab658f-3cf5-44b4-ae58-e97fb817b28a.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_000c3330-9966-43ae-9344-aeebdd090196.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_52ae477c-f5e8-4453-a1c2-44edadf0c0cf.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706010706031,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_52ae477c-f5e8-4453-a1c2-44edadf0c0cf.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_52ae477c-f5e8-4453-a1c2-44edadf0c0cf.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706010771567,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_265acce0-cb8f-47ec-a06b-22c2e0ef5457.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_265acce0-cb8f-47ec-a06b-22c2e0ef5457.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706010804335,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_5a3bd4e4-9d86-4f66-bbea-22889921d2b3.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_5a3bd4e4-9d86-4f66-bbea-22889921d2b3.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706010869871,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_81a56ca3-656f-4acc-8ffe-7ba95de9ddd1.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_81a56ca3-656f-4acc-8ffe-7ba95de9ddd1.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706010935407,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_3fab658f-3cf5-44b4-ae58-e97fb817b28a.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_3fab658f-3cf5-44b4-ae58-e97fb817b28a.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Legacy B4 BL5 APPLIED A to F - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706010968175,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_000c3330-9966-43ae-9344-aeebdd090196.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_000c3330-9966-43ae-9344-aeebdd090196.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLegacy B4 | BL5 APPLIED A | 2003-2004 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED B | 2004-2005 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED C | 2005-2006 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED D | 2006-2007 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED E | 2007-2008 | TC | EJ20Y | H4\u003cbr\u003eLegacy B4 | BL5 APPLIED F | 2008-2009 | TC | EJ20Y | H4\u003c!--split--\u003e"}

{"id":2021149966447,"title":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed)","handle":"grams-performance-injector-kit-subaru-impreza-wrx-sti-a-line-grf-gvf-most-ej20-25-top-feed","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eImpreza WRX STi A-Line | GVF APPLIED C | 2010-2012 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GVF APPLIED D | 2012-2013 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GVF APPLIED E | 2013-2014 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GRF APPLIED B | 2009-2009 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GRF APPLIED C | 2007-2012 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GRF APPLIED D | 2012-2013 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GRF APPLIED E | 2013-2014 | TC | EJ255 | H4\u003c!--split--\u003e","published_at":"2018-12-10T23:03:41+08:00","created_at":"2018-12-10T23:03:47+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2009","2010","2011","2012","2013","2014","2200cc","550cc","750cc","grams-performance","grams-performance25.5","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","injector-kits","subaru","top-feed","tva"],"price":45600,"price_min":45600,"price_max":103080,"available":true,"price_varies":true,"compare_at_price":45600,"compare_at_price_min":45600,"compare_at_price_max":103080,"compare_at_price_varies":true,"variants":[{"id":19263920406639,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - 550cc","public_title":"550cc","options":["550cc"],"price":45600,"weight":3000,"compare_at_price":45600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263920439407,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - 750cc","public_title":"750cc","options":["750cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263920472175,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - 1000cc","public_title":"1000cc","options":["1000cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263920504943,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - 1150cc","public_title":"1150cc","options":["1150cc"],"price":67920,"weight":3000,"compare_at_price":67920,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263920537711,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - 1600cc","public_title":"1600cc","options":["1600cc"],"price":103080,"weight":3000,"compare_at_price":103080,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263920570479,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - 2200cc","public_title":"2200cc","options":["2200cc"],"price":98400,"weight":3000,"compare_at_price":98400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_caa7b408-f18c-41a7-8ff2-b94462962008.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_f9ba7998-f5d1-4638-81fc-64c21ecdd2f5.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_76dfbd1c-c5ad-49e4-8676-21a64941ae6c.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_eb2b5b3a-b237-4e6d-ab48-35bf385ec044.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_dd27b8a4-e278-40f5-88ac-5883875583da.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_57d3596e-491a-4cba-afc7-66a5a73cd30e.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_caa7b408-f18c-41a7-8ff2-b94462962008.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009788527,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_caa7b408-f18c-41a7-8ff2-b94462962008.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_caa7b408-f18c-41a7-8ff2-b94462962008.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009821295,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_f9ba7998-f5d1-4638-81fc-64c21ecdd2f5.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_f9ba7998-f5d1-4638-81fc-64c21ecdd2f5.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009854063,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_76dfbd1c-c5ad-49e4-8676-21a64941ae6c.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_76dfbd1c-c5ad-49e4-8676-21a64941ae6c.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009886831,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_eb2b5b3a-b237-4e6d-ab48-35bf385ec044.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_eb2b5b3a-b237-4e6d-ab48-35bf385ec044.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009919599,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_dd27b8a4-e278-40f5-88ac-5883875583da.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_dd27b8a4-e278-40f5-88ac-5883875583da.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi A-Line GRF\/GVF - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706010050671,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_57d3596e-491a-4cba-afc7-66a5a73cd30e.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_57d3596e-491a-4cba-afc7-66a5a73cd30e.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eImpreza WRX STi A-Line | GVF APPLIED C | 2010-2012 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GVF APPLIED D | 2012-2013 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GVF APPLIED E | 2013-2014 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GRF APPLIED B | 2009-2009 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GRF APPLIED C | 2007-2012 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GRF APPLIED D | 2012-2013 | TC | EJ255 | H4\u003cbr\u003eImpreza WRX STi A-Line | GRF APPLIED E | 2013-2014 | TC | EJ255 | H4\u003c!--split--\u003e"}

{"id":2021149704303,"title":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed)","handle":"grams-performance-injector-kit-subaru-impreza-wrx-sti-grb-gvb-most-ej20-25-top-feed","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GRB APPLIED A | 2007-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED B | 2009-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED C | 2010-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED C | 2007-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003c!--split--\u003e","published_at":"2018-12-10T23:03:33+08:00","created_at":"2018-12-10T23:03:39+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2007","2008","2009","2010","2011","2012","2013","2014","2200cc","550cc","750cc","grams-performance","grams-performance25.5","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","injector-kits","subaru","top-feed","tva"],"price":45600,"price_min":45600,"price_max":103080,"available":true,"price_varies":true,"compare_at_price":45600,"compare_at_price_min":45600,"compare_at_price_max":103080,"compare_at_price_varies":true,"variants":[{"id":19263913787503,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - 550cc","public_title":"550cc","options":["550cc"],"price":45600,"weight":3000,"compare_at_price":45600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263913820271,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - 750cc","public_title":"750cc","options":["750cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263913853039,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - 1000cc","public_title":"1000cc","options":["1000cc"],"price":56160,"weight":3000,"compare_at_price":56160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263913885807,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - 1150cc","public_title":"1150cc","options":["1150cc"],"price":67920,"weight":3000,"compare_at_price":67920,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263913918575,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - 1600cc","public_title":"1600cc","options":["1600cc"],"price":103080,"weight":3000,"compare_at_price":103080,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263913951343,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-1200","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - 2200cc","public_title":"2200cc","options":["2200cc"],"price":98400,"weight":3000,"compare_at_price":98400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_dac2f2a8-89e6-4998-8316-e275f560bd33.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_07d16115-6881-4d93-82e2-09f36e93ec98.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_6e06e7cc-e7c1-461b-8fdc-dad3f8e04196.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_d93e3649-7c24-47f7-b5e3-f9e508cb9395.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_acbdabbe-0410-4ea3-a4e6-821974896665.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_9c3d3d03-7705-43f5-bb5b-b2a26f648f35.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_dac2f2a8-89e6-4998-8316-e275f560bd33.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009395311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_dac2f2a8-89e6-4998-8316-e275f560bd33.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_dac2f2a8-89e6-4998-8316-e275f560bd33.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009428079,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_07d16115-6881-4d93-82e2-09f36e93ec98.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_07d16115-6881-4d93-82e2-09f36e93ec98.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009460847,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_6e06e7cc-e7c1-461b-8fdc-dad3f8e04196.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_6e06e7cc-e7c1-461b-8fdc-dad3f8e04196.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009493615,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_d93e3649-7c24-47f7-b5e3-f9e508cb9395.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_d93e3649-7c24-47f7-b5e3-f9e508cb9395.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009526383,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_acbdabbe-0410-4ea3-a4e6-821974896665.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_acbdabbe-0410-4ea3-a4e6-821974896665.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Subaru - Impreza WRX STi GRB\/GVB - ( Most EJ20\/25 Top Feed) - Rzcrewgarage","id":1706009559151,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_9c3d3d03-7705-43f5-bb5b-b2a26f648f35.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_9c3d3d03-7705-43f5-bb5b-b2a26f648f35.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GRB APPLIED A | 2007-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED B | 2009-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED C | 2010-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED C | 2007-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003c!--split--\u003e"}

{"id":2021145935983,"title":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter)","handle":"grams-performance-injector-kit-honda-fit-jazz-ge8-ge9-14mm-top-adapter","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFit-Jazz | GE8 | 2007-2014 | NA | L15A | I4\u003cbr\u003eFit-Jazz | GE9 | 2007-2014 | NA | L15A | I4\u003c!--split--\u003e","published_at":"2018-12-10T23:00:00+08:00","created_at":"2018-12-10T23:00:05+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2007","2008","2009","2010","2011","2012","2013","2014","2200cc","550cc","750cc","fit-jazz-ge8-2007-2014-na-l15a-i4","fit-jazz-ge9-2007-2014-na-l15a-i4","grams-performance","grams-performance25.5","honda","injector-kits","top-feed","tva"],"price":44160,"price_min":44160,"price_max":101520,"available":true,"price_varies":true,"compare_at_price":44160,"compare_at_price_min":44160,"compare_at_price_max":101520,"compare_at_price_varies":true,"variants":[{"id":19263868469359,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - 550cc","public_title":"550cc","options":["550cc"],"price":44160,"weight":2000,"compare_at_price":44160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263868502127,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - 750cc","public_title":"750cc","options":["750cc"],"price":54600,"weight":2000,"compare_at_price":54600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263868534895,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - 1000cc","public_title":"1000cc","options":["1000cc"],"price":54600,"weight":2000,"compare_at_price":54600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263868567663,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - 1150cc","public_title":"1150cc","options":["1150cc"],"price":66360,"weight":2000,"compare_at_price":66360,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263868600431,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - 1600cc","public_title":"1600cc","options":["1600cc"],"price":101520,"weight":2000,"compare_at_price":101520,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263868633199,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - 2200cc","public_title":"2200cc","options":["2200cc"],"price":96840,"weight":2000,"compare_at_price":96840,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_ecf9d352-4e7d-49d4-96f2-a9fec0e5acc9.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_550f77a1-e4d2-47bb-8fde-62fb624911c5.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_1b4bbf3d-beeb-45b9-ac2f-7b39bd935401.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_3b5aafb9-ec1c-4441-bf7e-31baf710b2f7.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_5d744147-f406-4b8b-8014-4d348342a11d.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_0a45a94d-90b4-4233-8af1-26401f5ed07d.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_ecf9d352-4e7d-49d4-96f2-a9fec0e5acc9.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - Rzcrewgarage","id":1705990291567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_ecf9d352-4e7d-49d4-96f2-a9fec0e5acc9.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_ecf9d352-4e7d-49d4-96f2-a9fec0e5acc9.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - Rzcrewgarage","id":1705990324335,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_550f77a1-e4d2-47bb-8fde-62fb624911c5.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_550f77a1-e4d2-47bb-8fde-62fb624911c5.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - Rzcrewgarage","id":1705990357103,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_1b4bbf3d-beeb-45b9-ac2f-7b39bd935401.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_1b4bbf3d-beeb-45b9-ac2f-7b39bd935401.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - Rzcrewgarage","id":1705990389871,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_3b5aafb9-ec1c-4441-bf7e-31baf710b2f7.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_3b5aafb9-ec1c-4441-bf7e-31baf710b2f7.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - Rzcrewgarage","id":1705990422639,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_5d744147-f406-4b8b-8014-4d348342a11d.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_5d744147-f406-4b8b-8014-4d348342a11d.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - Fit-Jazz GE8\/GE9 - (14mm Top adapter) - Rzcrewgarage","id":1705990455407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_0a45a94d-90b4-4233-8af1-26401f5ed07d.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_0a45a94d-90b4-4233-8af1-26401f5ed07d.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFit-Jazz | GE8 | 2007-2014 | NA | L15A | I4\u003cbr\u003eFit-Jazz | GE9 | 2007-2014 | NA | L15A | I4\u003c!--split--\u003e"}

{"id":2021145804911,"title":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter)","handle":"grams-performance-injector-kit-honda-s2000-ap2-11mm-top-adapter","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2018-12-10T22:59:53+08:00","created_at":"2018-12-10T22:59:58+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2003","2004","2005","2006","2007","2008","2009","2200cc","550cc","750cc","grams-performance","grams-performance25.5","honda","injector-kits","s2000-ap2-2003-2009-na-f22c-i4","top-feed","tva"],"price":44160,"price_min":44160,"price_max":101520,"available":true,"price_varies":true,"compare_at_price":44160,"compare_at_price_min":44160,"compare_at_price_max":101520,"compare_at_price_varies":true,"variants":[{"id":19263867813999,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-0502","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - 550cc","public_title":"550cc","options":["550cc"],"price":44160,"weight":2000,"compare_at_price":44160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263867846767,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-0502","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - 750cc","public_title":"750cc","options":["750cc"],"price":54600,"weight":2000,"compare_at_price":54600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263867912303,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-0502","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - 1000cc","public_title":"1000cc","options":["1000cc"],"price":54600,"weight":2000,"compare_at_price":54600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263867977839,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-0502","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - 1150cc","public_title":"1150cc","options":["1150cc"],"price":66360,"weight":2000,"compare_at_price":66360,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263868043375,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-0502","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - 1600cc","public_title":"1600cc","options":["1600cc"],"price":101520,"weight":2000,"compare_at_price":101520,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263868108911,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-0502","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - 2200cc","public_title":"2200cc","options":["2200cc"],"price":96840,"weight":2000,"compare_at_price":96840,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_fb7096ce-8fdc-4c3e-a847-6eb8fee9a260.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_7fcaa29d-9993-43f7-8e0f-41620f6ec7f9.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_6eda354f-33d6-43cd-9ff0-021c22cf1d7d.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_373e3119-03c9-422a-9723-0732f7ee2ddd.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_d083ab45-d52f-4274-ae4c-16d3662b4827.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_a67eafc3-c9d8-4c3a-a860-e33aef8610ee.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_fb7096ce-8fdc-4c3e-a847-6eb8fee9a260.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - Rzcrewgarage","id":1705989865583,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_fb7096ce-8fdc-4c3e-a847-6eb8fee9a260.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_fb7096ce-8fdc-4c3e-a847-6eb8fee9a260.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - Rzcrewgarage","id":1705989898351,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_7fcaa29d-9993-43f7-8e0f-41620f6ec7f9.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_7fcaa29d-9993-43f7-8e0f-41620f6ec7f9.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - Rzcrewgarage","id":1705989931119,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_6eda354f-33d6-43cd-9ff0-021c22cf1d7d.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_6eda354f-33d6-43cd-9ff0-021c22cf1d7d.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - Rzcrewgarage","id":1705989963887,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_373e3119-03c9-422a-9723-0732f7ee2ddd.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_373e3119-03c9-422a-9723-0732f7ee2ddd.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - Rzcrewgarage","id":1705989996655,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_d083ab45-d52f-4274-ae4c-16d3662b4827.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_d083ab45-d52f-4274-ae4c-16d3662b4827.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - S2000 AP2 - (11mm Top adapter) - Rzcrewgarage","id":1705990029423,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_a67eafc3-c9d8-4c3a-a860-e33aef8610ee.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_a67eafc3-c9d8-4c3a-a860-e33aef8610ee.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":2021145706607,"title":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter)","handle":"grams-performance-injector-kit-honda-k-series-14mm-top-adapter","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic | FD2 | 2007-2010 | NA | K20Z2 | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2018-12-10T22:59:46+08:00","created_at":"2018-12-10T22:59:51+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2200cc","550cc","750cc","civic-fd2-2007-2010-na-k20z2-i4","civic-type-r-fd2r-2007-2010-na-k20a-i4","grams-performance","grams-performance25.5","honda","injector-kits","top-feed","tva"],"price":44160,"price_min":44160,"price_max":101520,"available":true,"price_varies":true,"compare_at_price":44160,"compare_at_price_min":44160,"compare_at_price_max":101520,"compare_at_price_varies":true,"variants":[{"id":19263866732655,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - 550cc","public_title":"550cc","options":["550cc"],"price":44160,"weight":2000,"compare_at_price":44160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263866765423,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - 750cc","public_title":"750cc","options":["750cc"],"price":54600,"weight":2000,"compare_at_price":54600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263866798191,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - 1000cc","public_title":"1000cc","options":["1000cc"],"price":54600,"weight":2000,"compare_at_price":54600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263866830959,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - 1150cc","public_title":"1150cc","options":["1150cc"],"price":66360,"weight":2000,"compare_at_price":66360,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263866863727,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - 1600cc","public_title":"1600cc","options":["1600cc"],"price":101520,"weight":2000,"compare_at_price":101520,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263866896495,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-0501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - 2200cc","public_title":"2200cc","options":["2200cc"],"price":96840,"weight":2000,"compare_at_price":96840,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_e6076f90-d46c-4289-af5b-4cb943083073.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_190682f8-189a-4852-bfc1-0a1052ac10c4.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_736abfed-8b97-4dd7-9e4d-de1158b0b44b.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_93b23ff6-dec5-48ac-a2a3-03ff97bf93bf.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_bd0abbdd-4d13-4f5a-83b6-b220085fd9d6.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_054454b7-f5f6-428c-ad26-5876325efb2e.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_e6076f90-d46c-4289-af5b-4cb943083073.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - Rzcrewgarage","id":1705989439599,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_e6076f90-d46c-4289-af5b-4cb943083073.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0500_e6076f90-d46c-4289-af5b-4cb943083073.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - Rzcrewgarage","id":1705989472367,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_190682f8-189a-4852-bfc1-0a1052ac10c4.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0500_190682f8-189a-4852-bfc1-0a1052ac10c4.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - Rzcrewgarage","id":1705989505135,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_736abfed-8b97-4dd7-9e4d-de1158b0b44b.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0500_736abfed-8b97-4dd7-9e4d-de1158b0b44b.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - Rzcrewgarage","id":1705989537903,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_93b23ff6-dec5-48ac-a2a3-03ff97bf93bf.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0500_93b23ff6-dec5-48ac-a2a3-03ff97bf93bf.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - Rzcrewgarage","id":1705989570671,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_bd0abbdd-4d13-4f5a-83b6-b220085fd9d6.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0500_bd0abbdd-4d13-4f5a-83b6-b220085fd9d6.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Honda - K Series - (14mm Top adapter) - Rzcrewgarage","id":1705989603439,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_054454b7-f5f6-428c-ad26-5876325efb2e.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0500_054454b7-f5f6-428c-ad26-5876325efb2e.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic | FD2 | 2007-2010 | NA | K20Z2 | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":2021105369199,"title":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter)","handle":"grams-performance-injector-kit-mazda-rx-8-se3p-11mm-top-adapter","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e","published_at":"2018-12-10T22:25:06+08:00","created_at":"2018-12-10T22:25:10+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2200cc","550cc","750cc","grams-performance","grams-performance25.5","injector-kits","mazda","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","top-feed","tva"],"price":25560,"price_min":25560,"price_max":54000,"available":true,"price_varies":true,"compare_at_price":25560,"compare_at_price_min":25560,"compare_at_price_max":54000,"compare_at_price_varies":true,"variants":[{"id":19263430393967,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - 550cc","public_title":"550cc","options":["550cc"],"price":25560,"weight":3000,"compare_at_price":25560,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263430426735,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - 750cc","public_title":"750cc","options":["750cc"],"price":25560,"weight":3000,"compare_at_price":25560,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263430459503,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - 1000cc","public_title":"1000cc","options":["1000cc"],"price":25560,"weight":3000,"compare_at_price":25560,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263430492271,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - 1150cc","public_title":"1150cc","options":["1150cc"],"price":36240,"weight":3000,"compare_at_price":36240,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263430525039,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - 1600cc","public_title":"1600cc","options":["1600cc"],"price":54000,"weight":3000,"compare_at_price":54000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263430557807,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - 2200cc","public_title":"2200cc","options":["2200cc"],"price":51480,"weight":3000,"compare_at_price":51480,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-1000.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-1000.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-1000.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-1000.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-1000.jpg?v=1571709582","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-1000.jpg?v=1571709582"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-1000.jpg?v=1571709582","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - Rzcrewgarage","id":1706014081135,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-1000.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-1000.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - Rzcrewgarage","id":1706014113903,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-1000.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-1000.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - Rzcrewgarage","id":1706014146671,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-1000.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-1000.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - Rzcrewgarage","id":1706014179439,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-1000.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-1000.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - Rzcrewgarage","id":1706014212207,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-1000.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-1000.jpg?v=1571709582","width":650},{"alt":"Grams Performance - Injector Kit - Mazda - RX-8 SE3P - (11mm Top adapter) - Rzcrewgarage","id":1706014277743,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-1000.jpg?v=1571709582"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-1000.jpg?v=1571709582","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e"}

{"id":2021104418927,"title":"Grams Performance - Injector Kit - Nissan - GT-R R35","handle":"grams-performance-injector-kit-nissan-gt-r-r35","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e","published_at":"2018-12-10T22:24:22+08:00","created_at":"2018-12-10T22:24:27+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2200cc","550cc","750cc","grams-performance","grams-performance25.5","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","injector-kits","nissan","top-feed","tva"],"price":65520,"price_min":65520,"price_max":152400,"available":true,"price_varies":true,"compare_at_price":65520,"compare_at_price_min":65520,"compare_at_price_max":152400,"compare_at_price_varies":true,"variants":[{"id":19263424954479,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-0709","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - GT-R R35 - 550cc","public_title":"550cc","options":["550cc"],"price":65520,"weight":3000,"compare_at_price":65520,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263424987247,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-0709","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - GT-R R35 - 750cc","public_title":"750cc","options":["750cc"],"price":80880,"weight":3000,"compare_at_price":80880,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263425020015,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-0709","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - GT-R R35 - 1000cc","public_title":"1000cc","options":["1000cc"],"price":80880,"weight":3000,"compare_at_price":80880,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263425052783,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-0709","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - GT-R R35 - 1150cc","public_title":"1150cc","options":["1150cc"],"price":98400,"weight":3000,"compare_at_price":98400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263425085551,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-0709","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - GT-R R35 - 1600cc","public_title":"1600cc","options":["1600cc"],"price":152400,"weight":3000,"compare_at_price":152400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263425118319,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-0709","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - GT-R R35 - 2200cc","public_title":"2200cc","options":["2200cc"],"price":145320,"weight":3000,"compare_at_price":145320,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0700_a0bac48a-4016-4043-87dc-0a8fe8b1f89f.jpg?v=1571709581","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0700_61a2989d-6d29-4e02-b1b9-3f7dda6c12b3.jpg?v=1571709581","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0700_db99b907-552b-4524-a318-08356c12f7cf.jpg?v=1571709581","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0700_c84229a4-5e21-40f9-bc97-fa7568f92f80.jpg?v=1571709581","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0700_43f3a9c5-4e3f-47b9-b043-71c82f1e431c.jpg?v=1571709581","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0700_77ed8a82-821a-4c4a-a3c3-3c2aec6e3ef7.jpg?v=1571709581"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0700_a0bac48a-4016-4043-87dc-0a8fe8b1f89f.jpg?v=1571709581","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Nissan - GT-R R35 - Rzcrewgarage","id":1705996157039,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0700_a0bac48a-4016-4043-87dc-0a8fe8b1f89f.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0700_a0bac48a-4016-4043-87dc-0a8fe8b1f89f.jpg?v=1571709581","width":650},{"alt":"Grams Performance - Injector Kit - Nissan - GT-R R35 - Rzcrewgarage","id":1705996189807,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0700_61a2989d-6d29-4e02-b1b9-3f7dda6c12b3.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0700_61a2989d-6d29-4e02-b1b9-3f7dda6c12b3.jpg?v=1571709581","width":650},{"alt":"Grams Performance - Injector Kit - Nissan - GT-R R35 - Rzcrewgarage","id":1705996222575,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0700_db99b907-552b-4524-a318-08356c12f7cf.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0700_db99b907-552b-4524-a318-08356c12f7cf.jpg?v=1571709581","width":650},{"alt":"Grams Performance - Injector Kit - Nissan - GT-R R35 - Rzcrewgarage","id":1705996255343,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0700_c84229a4-5e21-40f9-bc97-fa7568f92f80.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0700_c84229a4-5e21-40f9-bc97-fa7568f92f80.jpg?v=1571709581","width":650},{"alt":"Grams Performance - Injector Kit - Nissan - GT-R R35 - Rzcrewgarage","id":1705996288111,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0700_43f3a9c5-4e3f-47b9-b043-71c82f1e431c.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0700_43f3a9c5-4e3f-47b9-b043-71c82f1e431c.jpg?v=1571709581","width":650},{"alt":"Grams Performance - Injector Kit - Nissan - GT-R R35 - Rzcrewgarage","id":1705996320879,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0700_77ed8a82-821a-4c4a-a3c3-3c2aec6e3ef7.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0700_77ed8a82-821a-4c4a-a3c3-3c2aec6e3ef7.jpg?v=1571709581","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e"}

{"id":2021103665263,"title":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34","handle":"grams-performance-injector-kit-nissan-fairlady-z-z34","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e","published_at":"2018-12-10T22:23:48+08:00","created_at":"2018-12-10T22:23:52+08:00","vendor":"Grams Performance","type":"Injector Kits","tags":["1000cc","1150cc","1600cc","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2200cc","550cc","750cc","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","grams-performance","grams-performance25.5","injector-kits","nissan","top-feed","tva"],"price":65520,"price_min":65520,"price_max":152400,"available":true,"price_varies":true,"compare_at_price":65520,"compare_at_price_min":65520,"compare_at_price_max":152400,"compare_at_price_varies":true,"variants":[{"id":19263416008815,"title":"550cc","option1":"550cc","option2":null,"option3":null,"sku":"G2-0550-0701","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - 550cc","public_title":"550cc","options":["550cc"],"price":65520,"weight":3000,"compare_at_price":65520,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263416041583,"title":"750cc","option1":"750cc","option2":null,"option3":null,"sku":"G2-0750-0701","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - 750cc","public_title":"750cc","options":["750cc"],"price":80880,"weight":3000,"compare_at_price":80880,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263416074351,"title":"1000cc","option1":"1000cc","option2":null,"option3":null,"sku":"G2-1000-0701","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - 1000cc","public_title":"1000cc","options":["1000cc"],"price":80880,"weight":3000,"compare_at_price":80880,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263416107119,"title":"1150cc","option1":"1150cc","option2":null,"option3":null,"sku":"G2-1150-0701","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - 1150cc","public_title":"1150cc","options":["1150cc"],"price":98400,"weight":3000,"compare_at_price":98400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263416139887,"title":"1600cc","option1":"1600cc","option2":null,"option3":null,"sku":"G2-1600-0701","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - 1600cc","public_title":"1600cc","options":["1600cc"],"price":152400,"weight":3000,"compare_at_price":152400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":19263416172655,"title":"2200cc","option1":"2200cc","option2":null,"option3":null,"sku":"G2-2200-0701","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - 2200cc","public_title":"2200cc","options":["2200cc"],"price":145320,"weight":3000,"compare_at_price":145320,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0700_7abcb057-9d7e-4d5e-9ee5-11dbcba2adab.jpg?v=1571709581","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0700_4cf47b60-bafa-415f-aa32-561352feb984.jpg?v=1571709581","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0700_4f877049-99b3-4060-95e9-a59dc714b58a.jpg?v=1571709581","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0700_85ae2643-08b1-4376-a795-293dd4f2b135.jpg?v=1571709581","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0700_f2b17e1e-d9f2-47c9-bbdb-29806650072c.jpg?v=1571709581","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0700_27972eec-d8fc-4962-849b-297f48e2b533.jpg?v=1571709581"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0700_7abcb057-9d7e-4d5e-9ee5-11dbcba2adab.jpg?v=1571709581","options":["Injector Flow:"],"media":[{"alt":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - Rzcrewgarage","id":1705993633903,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0700_7abcb057-9d7e-4d5e-9ee5-11dbcba2adab.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0550-0700_7abcb057-9d7e-4d5e-9ee5-11dbcba2adab.jpg?v=1571709581","width":650},{"alt":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - Rzcrewgarage","id":1705993666671,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0700_4cf47b60-bafa-415f-aa32-561352feb984.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-0750-0700_4cf47b60-bafa-415f-aa32-561352feb984.jpg?v=1571709581","width":650},{"alt":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - Rzcrewgarage","id":1705993699439,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0700_4f877049-99b3-4060-95e9-a59dc714b58a.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1000-0700_4f877049-99b3-4060-95e9-a59dc714b58a.jpg?v=1571709581","width":650},{"alt":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - Rzcrewgarage","id":1705993732207,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0700_85ae2643-08b1-4376-a795-293dd4f2b135.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1150-0700_85ae2643-08b1-4376-a795-293dd4f2b135.jpg?v=1571709581","width":650},{"alt":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - Rzcrewgarage","id":1705993764975,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0700_f2b17e1e-d9f2-47c9-bbdb-29806650072c.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-1600-0700_f2b17e1e-d9f2-47c9-bbdb-29806650072c.jpg?v=1571709581","width":650},{"alt":"Grams Performance - Injector Kit - Nissan - Fairlady Z Z34 - Rzcrewgarage","id":1705993797743,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0700_27972eec-d8fc-4962-849b-297f48e2b533.jpg?v=1571709581"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/G2-2200-0700_27972eec-d8fc-4962-849b-297f48e2b533.jpg?v=1571709581","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eFlow: 550cc,750cc,1000cc,1150cc,1600cc,2200cc\u003cbr\u003eInjector Type: Top Feed\u003cbr\u003eSpecial Notes: \u003cbr\u003e\u003cbr\u003eGrams Performance offers innovative, high-performance fuel injectors for today’s vehicles. Designed to provide enhanced fuel flow and maximum power and performance, Grams Performance injectors are made using genuine Bosch® injectors, and have been subjected to rigorous dyno, street, and track testing. Each injector is individually flow tested, balanced, and dynamically matched in controlled laboratory environments using state-of-the-art equipment. Each injector utilizes ultra-fast precision solenoids and lightweight valve needles that result in a linear response curve and accurately metered fuel across a wide range of operating conditions and pulse widths. \u003cbr\u003e\u003cbr\u003eFEATURES \u0026amp; BENEFITS:\u003cbr\u003e\u003cbr\u003e\n\n-Compatible with all known fuels including gasoline, methanol, and ethanol\u003cbr\u003e\n\n-Flowed and balanced to within 1% for consistency\u003cbr\u003e\n\n-Precise fuel metering up to 118 psi (8 bar)\u003cbr\u003e\n\n-Pressure tested up to 220 psi (15.16 bar)\u003cbr\u003e\n\n-Lightweight valve needle and ultra-fast solenoid\u003cbr\u003e\n\n-Improved atomization for greater combustion efficiency and reduced emissions\u003cbr\u003e\n-Leak-free operation and optimal performance\u003cbr\u003e\n\n-High-impedance design (no resistor box required)\u003cbr\u003e\n\n-Over-molded one-piece design for added reliability and simplicity.\u003cbr\u003e\n\n-Made from Bosch® EV14 Standard housing\u003cbr\u003e\n\n-Direct OEM replacement \u003cbr\u003e\n\n-Comes with injector latency data to accurately set up aftermarket ECU\u003cbr\u003e\n\n-EV6-USCAR electrical connector\u003cbr\u003e\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e"}

{"id":1955931390063,"title":"Rzcrew Racing - Billet Airstream Intake Manifold - Mitsubishi - Lancer Evolution X CZ4A","handle":"rzcrew-garage-billet-airstream-intake-manifold-cz4a-hvair-t-evox","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: HVAIR-T-EVOX\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThis is the final version of our Billet Intake Manifold for the popular 4B11T engine. After the Blitz Intake manifold was discontinued, we decided to make our own due to popular demand.\nOur Rzcrew Racing Billet Intake for the EVO X is a fully bolt-on part. It will fit with the stock power steering pump and AC. It is compatible with both long nose and short nose injectors, and with any type of stock or aftermarket fuel rail. \n\u003cbr\u003e\u003cbr\u003eOur intake features: :\u003cbr\u003e- Full two parts Billet construction.\u003cbr\u003e- Heat resistant 3mm Teflon gasket between the plenum and the runners to ensure a lower intake temperature.\u003cbr\u003e-Lighweight construction: Only 6Kg.\u003cbr\u003e- A new flange design for easy bolt-on installation.\u003cbr\u003e- Total intake volume increased by 49%, with optimised airflow for better performance. Please note that plenum volume can be increased on demand (payable option).\u003cbr\u003eAll sensor fittings are now Located below the plenum, allowing for a clean look in the engine bay.\u003cbr\u003eThis product is fully customisable. Colour anodisation can be applied to the whole intake or separately to the runner and the plenum. Please choose your colour option in the menu. \u003cbr\u003e\u003cbr\u003eAll Rzcrew Racing Airstream intake manifolds feature high capacity plenums for better engine response and calculated oversized runners to ensure a faster airflow into the engine head. The flange is made to match the stock head for a seamless and turbulence-free air flow in the combustion chamber. \u003cbr\u003e\u003cbr\u003e\nWe highly recommend to have your intake manifolds professionally installed and Tune with a standalone to get the best performance out of our intakes.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Two Parts Full Billet Rzcrew Racing Airstream Technology Intake Manifold.\u003cbr\u003e- Heat Resistant Teflon Plenum to Intake Gasket.\u003cbr\u003e- Heat Resistant Teflon Throttle Body Gasket.\u003cbr\u003e- All Aluminum Fittings and Blockers.\u003cbr\u003e\u003cbr\u003eFor Turbo applications, the RZCrew manifolds generate between 15 to 40hp with supporting modifications (boost, high cams, higher flow injectors, etc) and engine tuning.\u003cbr\u003e\nPlease note that modification on your vacum and sensor wiring may be necessary to fit this intake manifold.\u003cbr\u003e\u003cbr\u003ePlease choose your Throttle Body Bolt Pattern in the Menu:\u003cbr\u003eStock Throttle Body pattern\u003cbr\u003eStock throttle body pattern with 75mm ID for Boomba Throttle body adapter\u003cbr\u003eBosch Throttle Body ref 0280750474\u003cbr\u003eIntake Volume: +49%\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003eRzcrew Racing","published_at":"2018-11-20T13:53:00+08:00","created_at":"2018-11-20T13:53:00+08:00","vendor":"Rzcrew Racing","type":"Intake Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","intake-manifold","intake-manifolds","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","rzcrew-garage","rzcrew-racing","rzcrew-racing472.06907286","tva"],"price":88320,"price_min":88320,"price_max":101680,"available":true,"price_varies":true,"compare_at_price":93000,"compare_at_price_min":93000,"compare_at_price_max":107000,"compare_at_price_varies":true,"variants":[{"id":39281951441007,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"HVAIR-T-EVOX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Billet Airstream Intake Manifold - Mitsubishi - Lancer Evolution X CZ4A - Silver","public_title":"Silver","options":["Silver"],"price":88320,"weight":8000,"compare_at_price":93000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":39281951473775,"title":"1 Colour ( Full intake Anodisation)","option1":"1 Colour ( Full intake Anodisation)","option2":null,"option3":null,"sku":"HVAIR-T-EVOX-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Billet Airstream Intake Manifold - Mitsubishi - Lancer Evolution X CZ4A - 1 Colour ( Full intake Anodisation)","public_title":"1 Colour ( Full intake Anodisation)","options":["1 Colour ( Full intake Anodisation)"],"price":95000,"weight":8000,"compare_at_price":100000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":39281951506543,"title":"2 Colours ( Runner and plenum colours are different)","option1":"2 Colours ( Runner and plenum colours are different)","option2":null,"option3":null,"sku":"HVAIR-T-EVOX-C-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Billet Airstream Intake Manifold - Mitsubishi - Lancer Evolution X CZ4A - 2 Colours ( Runner and plenum colours are different)","public_title":"2 Colours ( Runner and plenum colours are different)","options":["2 Colours ( Runner and plenum colours are different)"],"price":101680,"weight":8000,"compare_at_price":107000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Assembly.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_2.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Trumpet_2.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Plenum.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Back.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_Manifold_Flow_Lancer_Evo_X_CZ4A.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Airstream-Evo-X-00_5fb5ce10-4125-489f-87f0-ba01c867f052.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_2.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_3.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_4.jpg?v=1616054947","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_5.jpg?v=1616054948","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Anodisation-Colours_47b44828-ab08-45e5-8a7f-89f013557229.jpg?v=1616054948"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Assembly.jpg?v=1616054947","options":["Anodisation:"],"media":[{"alt":"Rzcrew Garage - Billet Airstream Intake Manifold - CZ4A - HVAIR-T-EVOX","id":20299234017391,"position":1,"preview_image":{"aspect_ratio":1.511,"height":1059,"width":1600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Assembly.jpg?v=1616054947"},"aspect_ratio":1.511,"height":1059,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Assembly.jpg?v=1616054947","width":1600},{"alt":null,"id":20299234050159,"position":2,"preview_image":{"aspect_ratio":1.509,"height":1060,"width":1600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX.jpg?v=1616054947"},"aspect_ratio":1.509,"height":1060,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX.jpg?v=1616054947","width":1600},{"alt":null,"id":20299234082927,"position":3,"preview_image":{"aspect_ratio":1.509,"height":1060,"width":1600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_2.jpg?v=1616054947"},"aspect_ratio":1.509,"height":1060,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_2.jpg?v=1616054947","width":1600},{"alt":null,"id":20299234115695,"position":4,"preview_image":{"aspect_ratio":1.509,"height":1060,"width":1600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Trumpet_2.jpg?v=1616054947"},"aspect_ratio":1.509,"height":1060,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Trumpet_2.jpg?v=1616054947","width":1600},{"alt":null,"id":20299234148463,"position":5,"preview_image":{"aspect_ratio":1.509,"height":1060,"width":1600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Plenum.jpg?v=1616054947"},"aspect_ratio":1.509,"height":1060,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Plenum.jpg?v=1616054947","width":1600},{"alt":null,"id":20299234181231,"position":6,"preview_image":{"aspect_ratio":1.511,"height":1059,"width":1600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Back.jpg?v=1616054947"},"aspect_ratio":1.511,"height":1059,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Back.jpg?v=1616054947","width":1600},{"alt":null,"id":20299234213999,"position":7,"preview_image":{"aspect_ratio":1.77,"height":610,"width":1080,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_Manifold_Flow_Lancer_Evo_X_CZ4A.jpg?v=1616054947"},"aspect_ratio":1.77,"height":610,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_Manifold_Flow_Lancer_Evo_X_CZ4A.jpg?v=1616054947","width":1080},{"alt":null,"id":20299234246767,"position":8,"preview_image":{"aspect_ratio":1.509,"height":1325,"width":2000,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Airstream-Evo-X-00_5fb5ce10-4125-489f-87f0-ba01c867f052.jpg?v=1616054947"},"aspect_ratio":1.509,"height":1325,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Airstream-Evo-X-00_5fb5ce10-4125-489f-87f0-ba01c867f052.jpg?v=1616054947","width":2000},{"alt":null,"id":20299234279535,"position":9,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting.jpg?v=1616054947"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting.jpg?v=1616054947","width":1600},{"alt":null,"id":20299234312303,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1560,"width":1560,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_2.jpg?v=1616054947"},"aspect_ratio":1.0,"height":1560,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_2.jpg?v=1616054947","width":1560},{"alt":null,"id":20299234345071,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1560,"width":1560,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_3.jpg?v=1616054947"},"aspect_ratio":1.0,"height":1560,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_3.jpg?v=1616054947","width":1560},{"alt":null,"id":20299234377839,"position":12,"preview_image":{"aspect_ratio":1.0,"height":1560,"width":1560,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_4.jpg?v=1616054947"},"aspect_ratio":1.0,"height":1560,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_4.jpg?v=1616054947","width":1560},{"alt":null,"id":20299234410607,"position":13,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_5.jpg?v=1616054948"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_manifold_Mitsubishi_Lance_Ecolution_X_CZ4A_HVAIR-T-EVOX_Fitting_5.jpg?v=1616054948","width":1600},{"alt":null,"id":20299234443375,"position":14,"preview_image":{"aspect_ratio":1.092,"height":927,"width":1012,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Anodisation-Colours_47b44828-ab08-45e5-8a7f-89f013557229.jpg?v=1616054948"},"aspect_ratio":1.092,"height":927,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Anodisation-Colours_47b44828-ab08-45e5-8a7f-89f013557229.jpg?v=1616054948","width":1012}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: HVAIR-T-EVOX\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThis is the final version of our Billet Intake Manifold for the popular 4B11T engine. After the Blitz Intake manifold was discontinued, we decided to make our own due to popular demand.\nOur Rzcrew Racing Billet Intake for the EVO X is a fully bolt-on part. It will fit with the stock power steering pump and AC. It is compatible with both long nose and short nose injectors, and with any type of stock or aftermarket fuel rail. \n\u003cbr\u003e\u003cbr\u003eOur intake features: :\u003cbr\u003e- Full two parts Billet construction.\u003cbr\u003e- Heat resistant 3mm Teflon gasket between the plenum and the runners to ensure a lower intake temperature.\u003cbr\u003e-Lighweight construction: Only 6Kg.\u003cbr\u003e- A new flange design for easy bolt-on installation.\u003cbr\u003e- Total intake volume increased by 49%, with optimised airflow for better performance. Please note that plenum volume can be increased on demand (payable option).\u003cbr\u003eAll sensor fittings are now Located below the plenum, allowing for a clean look in the engine bay.\u003cbr\u003eThis product is fully customisable. Colour anodisation can be applied to the whole intake or separately to the runner and the plenum. Please choose your colour option in the menu. \u003cbr\u003e\u003cbr\u003eAll Rzcrew Racing Airstream intake manifolds feature high capacity plenums for better engine response and calculated oversized runners to ensure a faster airflow into the engine head. The flange is made to match the stock head for a seamless and turbulence-free air flow in the combustion chamber. \u003cbr\u003e\u003cbr\u003e\nWe highly recommend to have your intake manifolds professionally installed and Tune with a standalone to get the best performance out of our intakes.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Two Parts Full Billet Rzcrew Racing Airstream Technology Intake Manifold.\u003cbr\u003e- Heat Resistant Teflon Plenum to Intake Gasket.\u003cbr\u003e- Heat Resistant Teflon Throttle Body Gasket.\u003cbr\u003e- All Aluminum Fittings and Blockers.\u003cbr\u003e\u003cbr\u003eFor Turbo applications, the RZCrew manifolds generate between 15 to 40hp with supporting modifications (boost, high cams, higher flow injectors, etc) and engine tuning.\u003cbr\u003e\nPlease note that modification on your vacum and sensor wiring may be necessary to fit this intake manifold.\u003cbr\u003e\u003cbr\u003ePlease choose your Throttle Body Bolt Pattern in the Menu:\u003cbr\u003eStock Throttle Body pattern\u003cbr\u003eStock throttle body pattern with 75mm ID for Boomba Throttle body adapter\u003cbr\u003eBosch Throttle Body ref 0280750474\u003cbr\u003eIntake Volume: +49%\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003eRzcrew Racing"}